Issue 45, 2019

Digitally printed stretchable electronics: a review

Abstract

Stretchable electronics are becoming an important branch in the field of electronics, with a rapidly growing number of studies on highly deformable circuits that can handle large tensile strains without losing electronic functionality. However, as the field continues to advance, a variety of manufacturing approaches must be explored so that these circuits can be produced in a rapid, precise, repeatable, inexpensive, and high-volume manner. Even in cases where methods from conventional printed circuit board (PCB) manufacturing are used, these techniques must be significantly modified in order to process the soft materials and fluids that are unique to stretchable electronic architectures. Digital printing methods such as Inkjet printing, 3D printing and laser ablation are especially attractive since they can be automated and eliminate the need for a stencil, mask or clean-room lithography. This article reviews recent advances in digital fabrication of stretchable circuits using either additive techniques, that allow direct printing of certain materials with a determined shape, or subtractive methods, in which the desired pattern is obtained by selectively removing parts of a greater film. For most of the materials used in stretchable electronics, these fabrication methods can be simple to implement, low cost, scalable over large areas, compatible with a broad variety of materials and have a size resolution that is comparable to conventional PCB manufacturing.

Graphical abstract: Digitally printed stretchable electronics: a review

Article information

Article type
Review Article
Submitted
02 Aug. 2019
Accepted
20 Sept. 2019
First published
20 Sept. 2019

J. Mater. Chem. C, 2019,7, 14035-14068

Digitally printed stretchable electronics: a review

D. F. Fernandes, C. Majidi and M. Tavakoli, J. Mater. Chem. C, 2019, 7, 14035 DOI: 10.1039/C9TC04246F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements