Issue 33, 2019

Tunable 3D light trapping architectures based on self-assembled SnSe2 nanoplate arrays for ultrasensitive SERS detection

Abstract

Adopting semiconductor materials with light-trapping architectures as the surface-enhanced Raman spectroscopy (SERS)-active substrates has received increasing attention, in which the multiple reflection and scattering of electromagnetic waves can improve the enhancement factor. However, the fabrication of these semiconductor SERS-active substrates commonly requires complicated processes, and these methods normally result in non-uniform and isolated particles/flakes, which have fundamental difficulties in meeting the practical needs in high performance and reliable SERS substrates. Herein, we demonstrate that SnSe2 nanoplate arrays (NPAs) via self-assembled growth can serve as uniform, highly sensitive and reliable SERS substrates. The cavity formed by the SnSe2 NPAs can trap light efficiently (∼96%) and thus improve the enhancement factor. Benefiting from the synergistic effect of the charge-transfer process and enhanced light trapping, the resulting SERS substrates based on pure SnSe2 NPAs show an ultralow detection limit (1 × 10−12 M), a high enhancement factor (6.33 × 106) and excellent uniformity (relative standard deviations down to 7.7%), demonstrating one of the highest sensitivities amongst the reported semiconductor SERS substrates. Furthermore, the effects of different SnSe2 structural configurations (planar vs. cavity), the height and tilt angle of the SnSe2 NPAs on the performance of SERS detection are systematically investigated. It is discovered that the SERS performance is strongly dependent on both the light-trapping ability and the absorption loss. We believe that our results not only provide an effective strategy to obtain tunable, uniform and high performance SERS substrates, but also lead to further understanding of designing 3D light trapping architectures.

Graphical abstract: Tunable 3D light trapping architectures based on self-assembled SnSe2 nanoplate arrays for ultrasensitive SERS detection

Supplementary files

Article information

Article type
Communication
Submitted
09 Jūl. 2019
Accepted
07 Aug. 2019
First published
07 Aug. 2019

J. Mater. Chem. C, 2019,7, 10179-10186

Tunable 3D light trapping architectures based on self-assembled SnSe2 nanoplate arrays for ultrasensitive SERS detection

W. Li, L. Xiong, N. Li, S. Pang, G. Xu, C. Yi, Z. Wang, G. Gu, K. Li, W. Li, L. Wei, G. Li, C. Yang and M. Chen, J. Mater. Chem. C, 2019, 7, 10179 DOI: 10.1039/C9TC03715B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements