Issue 37, 2019

A self-reconstructed (oxy)hydroxide@nanoporous metal phosphide electrode for high-performance rechargeable zinc batteries

Abstract

Rechargeable aqueous zinc batteries have attracted tremendous attention due to their remarkable high capacity, low cost, and good safety. However, their limited interfacial kinetics and poor rate performance have limited their application. Here, a new type of Ni//Zn rechargeable battery is fabricated with self-reconstructed (oxy)hydroxide@nanoporous Ni3P as a self-supported binder-free cathode. The (oxy)hydroxide@nanoporous Ni3P electrode exhibits an area specific capacity of 0.501 mA h cm−2 and a volume specific capacity of 167.0 mA h cm−3, and the alkali Zn battery achieves an energy density of 15.38 mW h cm−3 and a power density of 4.15 W cm−3, which are higher than most values reported in the literature. Benefiting from the good conductivity of the self-supported electrode, the efficient interfacial charge transfer of amorphous (oxy)hydroxide and fast ion diffusion via the pore channels in the binder-free electrode, the Ni//Zn battery exhibits excellent rate capability and cycling stability (94% retention after 6000 cycles). Combined with its good electrochemical stability and excellent rate performance, this novel electrode shows tremendous potential for application in high-capacity rechargeable Zn batteries.

Graphical abstract: A self-reconstructed (oxy)hydroxide@nanoporous metal phosphide electrode for high-performance rechargeable zinc batteries

Supplementary files

Article information

Article type
Communication
Submitted
21 Jūl. 2019
Accepted
31 Aug. 2019
First published
02 Sept. 2019

J. Mater. Chem. A, 2019,7, 21069-21078

A self-reconstructed (oxy)hydroxide@nanoporous metal phosphide electrode for high-performance rechargeable zinc batteries

Y. Jiang, M. Peng, J. Lan, Y. Zhao, Y. Lu, T. Chan, J. Liu and Y. Tan, J. Mater. Chem. A, 2019, 7, 21069 DOI: 10.1039/C9TA07910F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements