Issue 15, 2019

Acid and base catalysed reactions in one pot with site-isolated polyHIPE catalysts

Abstract

The polyHIPE catalysts based on styrene, vinyl benzyl chloride, and divinylbenzene co-polymerisation were functionalised with carboxylic and tertiary amine groups. Catalyst characterisation showed covalent bonding of the graft polymers. The macroporous and highly interconnected structure of polyHIPEs allows isolation of the acid and base functional groups and allows the presence of these otherwise incompatible functionalities on the same catalyst. The functionalised polyHIPE catalysts were shown to perform two reactions; (i) acid-catalysed acetal hydrolysis and (ii) base-catalysed Knoevenagel condensation in one-pot with 97% yield. The yield obtained is substantially higher than that observed with the homogeneous or resin polymer type catalysts due to the compartmentalisation of the active sites and improved mass transfer through the open porous polyHIPE structure.

Graphical abstract: Acid and base catalysed reactions in one pot with site-isolated polyHIPE catalysts

Supplementary files

Article information

Article type
Paper
Submitted
09 Febr. 2019
Accepted
04 Marts 2019
First published
12 Marts 2019
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2019,9, 8175-8183

Acid and base catalysed reactions in one pot with site-isolated polyHIPE catalysts

E. Yavuz, N. Cherkasov and V. Degirmenci, RSC Adv., 2019, 9, 8175 DOI: 10.1039/C9RA01053J

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements