Issue 42, 2019

Combining polybenzoxazines and polybutadienes via simultaneous inverse and direct vulcanization for flexible and recyclable thermosets by polysulfide dynamic bonding

Abstract

In this work, we report a novel approach to combine two structurally diverse polymers, namely polybenzoxazine and polybutadiene by simultaneous inverse and direct vulcanization. The process is based on mixing elemental sulphur, mono-functional benzoxazines and polybutadienes (PB) in various ratios, and heating up to 180 °C. Inverse vulcanization between sulphur atoms and oxazine rings triggered ring-opening polymerization of benzoxazines and vulcanization of PB proceeded concomitantly. Flexible films were cast in Teflon molds by using PB in high amounts in formulations. These films were cut into pieces and subjected to a recycling process at 180 °C for up to 5 cycles through polysulfide dynamic bonding. The extent of recovery of the films was quantified by tensile tests. Spectral characterization and thermal behavior of the films were also investigated before and after the recycling process.

Graphical abstract: Combining polybenzoxazines and polybutadienes via simultaneous inverse and direct vulcanization for flexible and recyclable thermosets by polysulfide dynamic bonding

Supplementary files

Article information

Article type
Paper
Submitted
16 Jūl. 2019
Accepted
15 Sept. 2019
First published
16 Sept. 2019

Polym. Chem., 2019,10, 5743-5750

Combining polybenzoxazines and polybutadienes via simultaneous inverse and direct vulcanization for flexible and recyclable thermosets by polysulfide dynamic bonding

B. Akkus, B. Kiskan and Y. Yagci, Polym. Chem., 2019, 10, 5743 DOI: 10.1039/C9PY01056D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements