Issue 8, 2019

In-place bonded semiconductor membranes as compliant substrates for III–V compound devices

Abstract

Overcoming the critical thickness limit in pseudomorphic growth of lattice mismatched heterostructures is a fundamental challenge in heteroepitaxy. On-demand transfer of light-emitting structures to arbitrary host substrates is an important technological method for optoelectronic and photonic device implementation. The use of freestanding membranes as compliant substrates is a promising approach to address both issues. In this work, the feasibility of using released GaAs/InGaAs/GaAs membranes as virtual substrates to thin films of InGaAs alloys is investigated as a function of the indium content in the films. Growth of flat epitaxial films is demonstrated with critical thickness beyond typical values observed for growth on bulk substrates. Optically active structures are also grown on these membranes with a strong photoluminescence signal and a clear red shift for an InAlGaAs/InGaAs/InAlGaAs quantum well. The red shift is ascribed to strain reduction in the quantum well due to the use of a completely relaxed membrane as the substrate. Our results demonstrate that such membranes constitute a virtual substrate that allows further heterostructure strain engineering, which is not possible when using other post-growth methods.

Graphical abstract: In-place bonded semiconductor membranes as compliant substrates for III–V compound devices

Supplementary files

Article information

Article type
Paper
Submitted
29 Okt. 2018
Accepted
21 Janv. 2019
First published
22 Janv. 2019

Nanoscale, 2019,11, 3748-3756

In-place bonded semiconductor membranes as compliant substrates for III–V compound devices

A. J. Garcia Jr., L. N. Rodrigues, S. F. Covre da Silva, S. L. Morelhão, O. D. D. Couto Jr., F. Iikawa and C. Deneke, Nanoscale, 2019, 11, 3748 DOI: 10.1039/C8NR08727J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements