Issue 44, 2018

In situ synthesis and in operando NMR studies of a high-performance Ni5P4-nanosheet anode

Abstract

Nickel phosphide (Ni5P4) nanosheets are synthesized using in situ chemical vapor deposition of P on Ni foam. The thickness of the as-synthesized Ni5P4 film is determined to be ∼5 nm, using atomic force microscopy (AFM). The small thickness shortens the diffusion path of Li ions and results in fast ion transport. In addition, the 2D Ni5P4 nanosheets seamlessly connect to the Ni foam, which facilitates electron transfer between Ni5P4 and the Ni current collector. Therefore, the binder/carbon free-nickel supported Ni5P4 shows fast rate performance as an anode for lithium-ion batteries (LIBs). The specific capacity of 2D Ni5P4 is obtained as 600 mA h g−1 at a cycling rate of 0.1C, approaching the theoretical capacity of 768 mA h g−1. Even at a rate of 0.5C, the capacity remains as 450 mA h g−1 over 100 cycles. A capacity >100 mA h g−1 is retained at a very high rate of 20C. Ni5P4 also exhibits a low voltage of ∼0.5 V with respect to Li metal, which makes it a suitable negative electrode for LIBs. In operando31P NMR and 7Li NMR are employed to probe the lithiation and de-lithiation mechanisms upon electrochemical cycling.

Graphical abstract: In situ synthesis and in operando NMR studies of a high-performance Ni5P4-nanosheet anode

Supplementary files

Article information

Article type
Paper
Submitted
07 Jūn. 2018
Accepted
04 Sept. 2018
First published
04 Sept. 2018

J. Mater. Chem. A, 2018,6, 22240-22247

Author version available

In situ synthesis and in operando NMR studies of a high-performance Ni5P4-nanosheet anode

X. Feng, M. Tang, S. O'Neill and Y. Hu, J. Mater. Chem. A, 2018, 6, 22240 DOI: 10.1039/C8TA05433A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements