Issue 1, 2018

Evaluation of a combined emulsion process to encapsulate methylene blue into PLGA nanoparticles

Abstract

The delivery of photosensitizer compounds using biodegradable nanoparticles could improve dosage, controlled release and its bioavailability. In this study, methylene blue (MB) loaded PLGA nanoparticles (MB-PNP) are prepared by a new approach combining single and double emulsification techniques. Comparisons of MB-PNP obtained with the combined and the individual techniques are presented. Nanoparticles are characterized by dynamic light scattering, laser Doppler electrophoresis and scanning electron microscopy. Particles prepared by the combined technique presented hydrodynamic diameters of 186 nm. The sizes of MB-PNP obtained from the single emulsion technique are similar to the combined technique, while the diameter of particles prepared by double emulsion increased from 201 nm to 287 nm as the TDL increased. MB-PNP displayed an average zeta potential between −21 mV and −28 mV for all formulations. MB loading ranges between 0.3–1.4%, while the encapsulation efficiency ranges from 8–14%, both depending on the TDL and the preparation technique. In vitro release studies show a monophasic release profile that was analyzed by considering the mechanisms of initial burst, drug diffusion and a combination of them. Experimental results could be better described using a mathematical model of release that simultaneously combines the mechanisms of initial burst and drug diffusion. The approach presented to encapsulate MB and also to analyze the drug release could be extended to other drugs with partial solubility.

Graphical abstract: Evaluation of a combined emulsion process to encapsulate methylene blue into PLGA nanoparticles

Article information

Article type
Paper
Submitted
10 Nov. 2017
Accepted
15 Dec. 2017
First published
02 Janv. 2018
This article is Open Access
Creative Commons BY-NC license

RSC Adv., 2018,8, 414-422

Evaluation of a combined emulsion process to encapsulate methylene blue into PLGA nanoparticles

C. A. Gutiérrez-Valenzuela, R. Esquivel, P. Guerrero-Germán, P. Zavala-Rivera, J. C. Rodríguez-Figueroa, R. Guzmán-Z and A. Lucero-Acuña, RSC Adv., 2018, 8, 414 DOI: 10.1039/C7RA12296A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements