Issue 3, 2018

Polysulfides made from re-purposed waste are sustainable materials for removing iron from water

Abstract

Water contaminated with Fe3+ is undesirable because it can result in discoloured plumbing fixtures, clogging, and a poor taste and aesthetic profile for drinking water. At high levels, Fe3+ can also promote the growth of unwanted bacteria, so environmental agencies and water authorities typically regulate the amount of Fe3+ in municipal water and wastewater. Here, polysulfide sorbents—prepared from elemental sulfur and unsaturated cooking oils—are used to remove Fe3+ contaminants from water. The sorbent is low-cost and sustainable, as it can be prepared entirely from waste. The preparation of this material using microwave heating and its application in iron capture are two important advances in the growing field of sulfur polymers.

Graphical abstract: Polysulfides made from re-purposed waste are sustainable materials for removing iron from water

Supplementary files

Article information

Article type
Paper
Submitted
31 Okt. 2017
Accepted
19 Dec. 2017
First published
03 Janv. 2018
This article is Open Access
Creative Commons BY license

RSC Adv., 2018,8, 1232-1236

Polysulfides made from re-purposed waste are sustainable materials for removing iron from water

N. A. Lundquist, M. J. H. Worthington, N. Adamson, C. T. Gibson, M. R. Johnston, A. V. Ellis and J. M. Chalker, RSC Adv., 2018, 8, 1232 DOI: 10.1039/C7RA11999B

This article is licensed under a Creative Commons Attribution 3.0 Unported Licence. You can use material from this article in other publications without requesting further permissions from the RSC, provided that the correct acknowledgement is given.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements