Issue 3, 2018

A rapid and simple single-stage method for Ca separation from geological and biological samples for isotopic analysis by MC-ICP-MS

Abstract

A new simple and rapid method was developed for the purification of Ca from geological and biological samples. The proposed separation protocol is based on DGA resin and consists of only three elution steps and two types of eluents (6.8 mL 4 mol L−1 HNO3 and 3 mL DI-water), which afford a straightforward separation of Ca with a high yield (95–99%), good purity and low blank level. Moreover, a vacuum box was employed which enables Ca purification for a batch of twelve samples within two hours, with greatly improved efficiency compared to conventional gravity flow separation methods. Ca isotopic ratios were measured by multi-collector inductively coupled plasma mass-spectrometry (MC-ICP-MS) using a standard–sample bracketing method. Based on repeated measurements of NIST SRM 915a and Alfa Ca, the long-term reproducibility was evaluated at ±0.07‰ (2SD) for δ44/42Ca. The validity of the proposed method was demonstrated by the analysis of thirteen international geological and biological reference materials with satisfactory results which are in good agreement with published values. Therefore, the proposed method can be used for a rapid and efficient determination of stable Ca isotopic ratios in geological and biological samples.

Graphical abstract: A rapid and simple single-stage method for Ca separation from geological and biological samples for isotopic analysis by MC-ICP-MS

Supplementary files

Article information

Article type
Paper
Submitted
12 Nov. 2017
Accepted
18 Janv. 2018
First published
18 Janv. 2018

J. Anal. At. Spectrom., 2018,33, 413-421

A rapid and simple single-stage method for Ca separation from geological and biological samples for isotopic analysis by MC-ICP-MS

F. Lanping, L. Zhou, L. Yang, W. Zhang, Q. Wang, T. Shuoyun and Z. Hu, J. Anal. At. Spectrom., 2018, 33, 413 DOI: 10.1039/C7JA00370F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements