Issue 26, 2017

Highly efficient and stable low-temperature processed ZnO solar cells with triple cation perovskite absorber

Abstract

Although ZnO is a compatible electron transport layer (ETL) for perovskite solar cells (PSCs), the fact that MAPbI3 easily undergoes thermal decomposition on a low-temperature processed ZnO surface limits the use of one-step deposition of perovskite and hence the resulting photovoltaic performance. Herein, we demonstrate triple cation perovskite (Csx(MA0.17FA0.83)(100−x)Pb(I0.83Br0.17)3) prepared with a one-step deposition method as a stable light absorber in highly efficient PSCs with low-temperature processed ZnO as the ETL. The photovoltaic performance of the investigated PSCs was dependent on both the annealing temperature of the perovskite film and the composition of the Cs element in the perovskite structure. A remnant PbI2 passivation phase in the perovskite layer, in which the composition is Cs6(MA0.17FA0.83)94Pb(I0.83Br0.17)3 and the annealing temperature is 95 °C, leads to the highest power conversion efficiency of ∼18.9%, which is a record-high so far for low-temperature processed ZnO-based PSCs. Importantly, this PSC exhibits excellent environmental durability and photostability, which are critical characteristics for further commercialization of low-temperature processed PSCs.

Graphical abstract: Highly efficient and stable low-temperature processed ZnO solar cells with triple cation perovskite absorber

Supplementary files

Article information

Article type
Paper
Submitted
17 Apr. 2017
Accepted
02 Jūn. 2017
First published
02 Jūn. 2017

J. Mater. Chem. A, 2017,5, 13439-13447

Highly efficient and stable low-temperature processed ZnO solar cells with triple cation perovskite absorber

J. Song, L. Liu, X. Wang, G. Chen, W. Tian and T. Miyasaka, J. Mater. Chem. A, 2017, 5, 13439 DOI: 10.1039/C7TA03331A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements