Issue 9, 2017

Multi-shell tin phosphide nanospheres as high performance anode material for a sodium ion battery

Abstract

Tin phosphide (Sn4P3) combined with the good conductivity of tin (Sn) and high capacity of phosphorus has been reported to be a potential anode material for the sodium ion battery (SIB). However, the preparation of Sn4P3 is limited to ball-milling and compositing with carbon materials. The novel and detailed structure of Sn4P3 itself has so far not been revealed. In this research, the multi-shell Sn4P3 nano-structure was obtained, for the first time, using a simple and general low temperature solvothermal method. The multi-shell structure with a larger specific surface area and interlayer space endows this new anode material with a short cut pathway for sodium ion diffusion and a buffer space for volume expansion during sodiation, thus avoiding electrode pulverization and improving the cycling performance of the SIB. The as-prepared multi-shell Sn4P3 delivers an excellent specific capacity of 770 mAh g−1 with capacity retention of 96% after 50 cycles at the current density of 50 mA g−1, demonstrating the superiority of structure optimization in SIB anode preparation.

Graphical abstract: Multi-shell tin phosphide nanospheres as high performance anode material for a sodium ion battery

Supplementary files

Article information

Article type
Paper
Submitted
24 Jūl. 2017
Accepted
31 Aug. 2017
First published
01 Sept. 2017

Sustainable Energy Fuels, 2017,1, 1944-1949

Multi-shell tin phosphide nanospheres as high performance anode material for a sodium ion battery

S. Huang, C. Meng, M. Xiao, S. Ren, S. Wang, D. Han, Y. Li and Y. Meng, Sustainable Energy Fuels, 2017, 1, 1944 DOI: 10.1039/C7SE00355B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements