Issue 7, 2016

N-type polymers as electron extraction layers in hybrid perovskite solar cells with improved ambient stability

Abstract

We studied three n-type polymers of the naphthalenediimide-bithiophene family as electron extraction layers (EELs) in hybrid perovskite solar cells. The recombination mechanism in these devices is found to be heavily influenced by the EEL transport properties. The maximum efficiency of the devices using the n-type polymers EELs did not exceed substantially that of the devices using PC60BM (about 11%), while a substantial improvement in their ambient stability (87% of the initial value after 270 minutes) compared to that using PC60BM (3.5% of the initial value after 270 minutes) was detected.

Graphical abstract: N-type polymers as electron extraction layers in hybrid perovskite solar cells with improved ambient stability

Supplementary files

Article information

Article type
Communication
Submitted
29 Dec. 2015
Accepted
13 Janv. 2016
First published
15 Janv. 2016
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. A, 2016,4, 2419-2426

N-type polymers as electron extraction layers in hybrid perovskite solar cells with improved ambient stability

S. Shao, Z. Chen, H.-H. Fang, G. H. ten Brink, D. Bartesaghi, S. Adjokatse, L. J. A. Koster, B. J. Kooi, A. Facchetti and M. A. Loi, J. Mater. Chem. A, 2016, 4, 2419 DOI: 10.1039/C5TA10696F

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements