Issue 39, 2016

Inkjet printing on transparency films for reagent storage with polyester–toner microdevices

Abstract

The use of overhead transparencies as substrates for the fabrication of microfluidic devices brings new capabilities in the creation of fully-integrated systems. Here, we describe a reagent storage method through inkjet printing that is complementary to the simple print, cut and laminate (PCL) fabrication technique, which already incorporates printing toner onto commercial off-the-shelf materials for fabrication of polyester–toner microdevices. With the surface of the polyester film dramatically different than paper, substrate optimization was required to increase printability without incorporating additional substrate-coating steps. Functionality for chemical sensing devices, operated centrifugally here, was demonstrated through standard human serum albumin analysis. Quantitative results were obtained through image analysis using a desktop scanner to determine color change in the presence of various total protein and albumin concentrations. Printed devices exhibited a shelf life of at least two months with no loss in activity, resulting in a relative standard deviation of 0.652% for total protein analysis.

Graphical abstract: Inkjet printing on transparency films for reagent storage with polyester–toner microdevices

Supplementary files

Article information

Article type
Paper
Submitted
02 Jūl. 2016
Accepted
02 Sept. 2016
First published
15 Sept. 2016

Anal. Methods, 2016,8, 7061-7068

Inkjet printing on transparency films for reagent storage with polyester–toner microdevices

S. T. Krauss, T. P. Remcho, E. Monazami, B. L. Thompson, P. Reinke, M. R. Begley and J. P. Landers, Anal. Methods, 2016, 8, 7061 DOI: 10.1039/C6AY01878E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements