Issue 53, 2015

Efficient adsorption of Europhtal onto activated carbon modified with ligands (1E,2E)-1,2-bis(pyridin-4-ylmethylene)hydrazine (M) and (1E,2E)-1,2-bis(pyridin-3-ylmethylene)hydrazine (SCH-4); response surface methodology

Abstract

Porous activated carbon was modified with (1E,2E)-1,2-bis(pyridin-4-ylmethylene)hydrazine (M) and (1E,2E)-1,2-bis(pyridin-3-ylmethylene)hydrazine (SCH-4). Characterization was performed using different techniques such as SEM, FTIR and 1H NMR analysis. Then, these new adsorbents were used for the efficient removal of Europhtal (sulfonated cobalt phthalocyanine). Response surface methodology (RSM) was used to achieve operational conditions for the efficient removal of Europhtal using an activated carbon modified with novel ligands. To investigate the individual effect of variables involved and the effect of their possible interactions on the adsorption process, several systematic experiments were designed by varying the variables such as pH, sonication time, adsorbent dosage and dye concentration in the range of 2.0–11, 2–8 min, 0.005–0.035 g and 4–30 mg L−1, respectively. The optimum values of pH, sonication time, adsorbent dosage and Europhtal concentration were found to be 7, 2 min, 30 mg L−1 and 0.03 g for the sample modified with M and 7, 5 min, 30 mg L−1 and 0.03 g for the one modified with SCH-4, at which the removal percentages were more than 98%. Adsorption equilibrium data were well fitted to the Freundlich model with maximum adsorption capacities of 56.69 and 17.84 mg g−1 for M and SCH-4, respectively. The study of adsorption kinetics indicated that the dye uptake process follows the pseudo second-order and saturation type rate expressions for each ligand.

Graphical abstract: Efficient adsorption of Europhtal onto activated carbon modified with ligands (1E,2E)-1,2-bis(pyridin-4-ylmethylene)hydrazine (M) and (1E,2E)-1,2-bis(pyridin-3-ylmethylene)hydrazine (SCH-4); response surface methodology

Article information

Article type
Paper
Submitted
28 Febr. 2015
Accepted
23 Apr. 2015
First published
24 Apr. 2015

RSC Adv., 2015,5, 42376-42387

Author version available

Efficient adsorption of Europhtal onto activated carbon modified with ligands (1E,2E)-1,2-bis(pyridin-4-ylmethylene)hydrazine (M) and (1E,2E)-1,2-bis(pyridin-3-ylmethylene)hydrazine (SCH-4); response surface methodology

M. Ghaedi, E. Alam barakat, A. Asfaram, B. Mirtamizdoust, A. A. Bazrafshan and S. Hajati, RSC Adv., 2015, 5, 42376 DOI: 10.1039/C5RA03622D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements