Issue 1, 2015

Direct elemental analysis of honeys by atmospheric pressure glow discharge generated in contact with a flowing liquid cathode

Abstract

Miniaturized atmospheric pressure glow discharge sustained in a compact discharge cell in contact with a flowing liquid cathode was used for the elemental analysis of honeys by optical emission spectrometry. A simplified sample preparation procedure was proposed and samples of honeys were only dissolved in water and acidified with HCl to a concentration of 0.10 mol L−1. The resulting 1.0% m/v in the case of K and Na and 5.0% m/v in the case of Ca, Cu, Fe, Li, Mg, Mn, Rb and Zn solutions of honeys were directly introduced into the discharge cell acting as the liquid cathode of the discharge. To eliminate matrix effects coming from fructose and glucose, a non-ionic surfactant (Triton X-405) was added to the solutions and this resulted in improved signals of studied elements. For calibration, simple (for K and Na) and matrix-matching (for other elements) standard solutions were used. The method was proved to give reliable results and applied in the analysis of 16 commercial white- to amber-colored honeys with limits of detection at levels of 1.0 (Ca), 0.7 (Cu), 2.5 (Fe), 0.5 (K), 0.02 (Li), 0.2 (Mg), 1.8 (Mn), 0.04 (Na), 0.1 (Rb) and 0.2 (Zn) μg g−1.

Graphical abstract: Direct elemental analysis of honeys by atmospheric pressure glow discharge generated in contact with a flowing liquid cathode

Article information

Article type
Paper
Submitted
31 Jūl. 2014
Accepted
17 Sept. 2014
First published
17 Sept. 2014

J. Anal. At. Spectrom., 2015,30, 154-161

Author version available

Direct elemental analysis of honeys by atmospheric pressure glow discharge generated in contact with a flowing liquid cathode

K. Greda, P. Jamroz, A. Dzimitrowicz and P. Pohl, J. Anal. At. Spectrom., 2015, 30, 154 DOI: 10.1039/C4JA00261J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements