Issue 1, 2015

Metal and metalloid determination in biodiesel and bioethanol

Abstract

Biofuel quality control involves the determination of metal and metalloid content. These species play a very important role because they may modify the efficiency of biofuel production as well as the stability of these products. Furthermore, some metals are toxic and generate environmental concerns whereas others are used as additives. Normally, products such as biodiesel and bioethanol are mixed with conventional fossil fuels (diesel and gasoline, respectively). Therefore, metals come from the raw product employed for biofuel production (seeds, sugars…) as well as from the production and storage process or even from the added fuels. The determination of the final metal and metalloid concentration in biofuels is a challenging subject because of several reasons. On the one hand, their content is usually low (i.e., from several μg L−1 to mg L−1) and, hence, sensitive techniques should be used. Besides all these, calibration with organic complex matrices becomes more difficult and degrades the accuracy of the determination. Several approaches have been evaluated to carry out this kind of analysis going from spectrochemical to electroanalytical techniques. Within the first group, Inductively Coupled Plasma Optical Emission Spectroscopy (ICP-OES) and Mass Spectrometry (ICP-MS) are often employed together with atomic absorption methods. The different procedures applied will be discussed in the present review emphasizing the most widely employed ones. On this subject, fundamental as well as applied studies related to the biofuel analysis through ICP-OES and ICP-MS will be shown to illustrate the current difficulties associated with these determinations. Comments regarding the possible solutions proposed to overcome the drawbacks encountered will be made.

Graphical abstract: Metal and metalloid determination in biodiesel and bioethanol

Article information

Article type
Critical Review
Submitted
18 Jūn. 2014
Accepted
02 Sept. 2014
First published
09 Okt. 2014

J. Anal. At. Spectrom., 2015,30, 64-101

Author version available

Metal and metalloid determination in biodiesel and bioethanol

R. Sánchez, C. Sánchez, C. Lienemann and J. Todolí, J. Anal. At. Spectrom., 2015, 30, 64 DOI: 10.1039/C4JA00202D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements