Issue 8, 2015

Effective deoxygenation of fatty acids over Ni(OAc)2 in the absence of H2 and solvent

Abstract

Different metal acetate salts were systematically examined for the catalytic deoxygenation of stearic acid in the absence of H2 and solvent for the first time. Ni(OAc)2 exhibited the highest activity with 62% yield achieved at 350 °C for 4.5 h with only 1 mol% (0.2 wt%) of the catalyst. Even with 0.25 mol% (0.05 wt%) catalyst, around 28% yield was achieved within 2 h at 350 °C with 89% selectivity to C17 hydrocarbons. The activity based on C17 yields per Ni was 14.5 mol mol−1 h−1, considerably higher than that in previous reports. The catalytically active species were identified to be in situ generated Ni nanoparticles (8–10 nm) formed from the decomposition of the metal precursor with stearic acid as a stabilizer. A new reaction pathway of alkane formation from stearic acid via anhydride intermediate decarbonylation under an inert gas atmosphere was proposed. The excellent stability of the catalyst was demonstrated by re-adding a substrate to the system, during which the activity remained constant through four consecutive runs. The novel catalytic system was found to be applicable to a range of fatty acids and triglycerides with varying activities.

Graphical abstract: Effective deoxygenation of fatty acids over Ni(OAc)2 in the absence of H2 and solvent

Supplementary files

Article information

Article type
Paper
Submitted
28 Maijs 2015
Accepted
22 Jūn. 2015
First published
22 Jūn. 2015

Green Chem., 2015,17, 4198-4205

Author version available

Effective deoxygenation of fatty acids over Ni(OAc)2 in the absence of H2 and solvent

W. Li, Y. Gao, S. Yao, D. Ma and N. Yan, Green Chem., 2015, 17, 4198 DOI: 10.1039/C5GC01147G

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements