Issue 7, 2014

Compensation of inorganic acid interferences in ICP-OES and ICP-MS using a Flow Blurring® multinebulizer

Abstract

A new and easy method has been proposed for the compensation of inorganic acid matrix effects in ICP-OES and ICP-MS. The method consists of an on-line standard addition calibration using a Flow Blurring® multinebulizer (FBMN-based system). Experimental conditions of the FBMN-based system are optimized for both ICP-OES and ICP-MS. Under optimized conditions recovery values obtained in the analysis of synthetic acid samples were close to 100% for HNO3 and HCl (with acid concentrations of up to 15% (w/w)) and H2SO4 (up to 10% (w/w) for both plasma-based spectrochemical techniques. The applicability of the proposed method has been evaluated analyzing two whole milk powders, a certified reference material and a commercial product, showing excellent recovery values. Compared with other calibration strategies and experimental setups used, the on-line standard addition calibration using the FBMN-based system is faster, easier to handle and significantly reduces reagent and sample consumption.

Graphical abstract: Compensation of inorganic acid interferences in ICP-OES and ICP-MS using a Flow Blurring® multinebulizer

Supplementary files

Article information

Article type
Paper
Submitted
20 Febr. 2014
Accepted
26 Marts 2014
First published
26 Marts 2014

J. Anal. At. Spectrom., 2014,29, 1218-1227

Author version available

Compensation of inorganic acid interferences in ICP-OES and ICP-MS using a Flow Blurring® multinebulizer

M. Á. Aguirre, L. L. Fialho, J. A. Nóbrega, M. Hidalgo and A. Canals, J. Anal. At. Spectrom., 2014, 29, 1218 DOI: 10.1039/C4JA00079J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements