Issue 7, 2012

LA-ICP-MS with microarray chip sampling to determine holoceruloplasmin in serum

Abstract

An analytical method was developed to determine holoceruloplasmin (holo-CP) concentration in serum using laser ablation inductively coupled plasma-mass spectrometry (LA-ICP-MS). Since each holo-CP in serum contains six Cu ions, the concentration was estimated quantitatively by determining the Cu concentration. For small sample consumption, polydimethylsiloxane (PDMS) microarray chips with 150 μm diameter pillars were manufactured. The surface of each pillar was immobilized by a ceruloplasmin (CP) antibody (IgG) for an antigen–antibody reaction to afford high selectivity for the sampling of total CP in the serum matrix. A calibration curve with a linear regression coefficient of 0.992 was obtained by standard addition methods. For demonstration, 126 pL of human serum was loaded on each pillar of the microarray chips and analyzed by LA-ICP-MS in single-shot mode. The determined concentration of holo-CP was compared with that of the total CP estimated by competitive enzyme linked immunosorbent assay (ELISA), from which the concentration of apoceruloplasmin (apo-CP) was deduced. In conclusion, this analytical method for determining holo-CP concentration with high selectivity and small sample volume can be used in the confirmative diagnosis of diseases related to copper deficiency in clinical samples.

Graphical abstract: LA-ICP-MS with microarray chip sampling to determine holoceruloplasmin in serum

Supplementary files

Article information

Article type
Paper
Submitted
18 Dec. 2011
Accepted
09 Febr. 2012
First published
13 Marts 2012

J. Anal. At. Spectrom., 2012,27, 1069-1073

LA-ICP-MS with microarray chip sampling to determine holoceruloplasmin in serum

J. Joo and H. B. Lim, J. Anal. At. Spectrom., 2012, 27, 1069 DOI: 10.1039/C2JA10375C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements