Issue 34, 2023

Recent progress in the stabilization of low band-gap black-phase iodide perovskite solar cells

Abstract

All-inorganic and organic–inorganic hybrid perovskite solar cells (PSCs) have taken a quantum leap owing to their high performance and low-cost solution processability. Their efficiency has been dramatically increased up to ∼26%, matching the conventional inorganic photovoltaics like monocrystalline Si (26.1%), polycrystalline Si (21.6%), CdTe (22.1%), and CIGS (22.3%). Such outstanding performance has been achieved due to their excellent optoelectronic properties, such as a direct bandgap in the visible region, a very high absorption coefficient, a long charge-carrier diffusion length, and ambipolar carrier transport characteristics. FAPbI3 (FA = formamidinium) and CsPbI3 perovskites among the pool of perovskites are recommended for solar cell applications because they meet all the requirements for photovoltaic applications. However, the fundamental problem of these perovskites is that their photoactive black phase is highly unstable under ambient conditions due to small and large sizes of Cs+ and FA+ ions, respectively. The instability of the black phase of these perovskites hinders their applications in photovoltaic devices as a high-quality light absorber layer. Several approaches have been employed to prevent the formation of the photo-inactive yellow phase or to enhance the stability of the black phase of perovskites, such as dimensional and compositional engineering, the addition of external additives, and dimensional engineering. This perspective summarizes the various methods for stabilizing the black phase of CsPbI3 and FAPbI3 perovskites at room temperature as well as their application in photovoltaic devices.

Graphical abstract: Recent progress in the stabilization of low band-gap black-phase iodide perovskite solar cells

Article information

Article type
Perspective
Submitted
25 Maijs 2023
Accepted
05 Aug. 2023
First published
08 Aug. 2023

Dalton Trans., 2023,52, 11750-11767

Recent progress in the stabilization of low band-gap black-phase iodide perovskite solar cells

M. Mittal, R. Garg and A. Jana, Dalton Trans., 2023, 52, 11750 DOI: 10.1039/D3DT01581E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements