Optimization of microstructure in high-silver content conductive inks via solvent volatilization modulation for application in flexible electronics

Qisong Feng, Junjun Ma, Yankun Shen, Zheng Zhou, Shilian Wu, Juan Wang, Junpeng Li and Yu Yang

RSC Adv., 2025, 15, 40478
DOI: 10.1039/D5RA01591J

A dual-ion-selective electrode system for real-time monitoring of dissolved ammonia

Ayman H. Kamel and Hisham S. M. Abd-Rabboh

Analyst, 2025, 150, 4145
DOI: 10.1039/D5AN00647C

Chemistry in evaporating sessile droplets

Sujay Paul and Arun Chattopadhyay

Chem. Commun., 2026, 62, 9773
DOI: 10.1039/D6CC01128D

Air-sinterable copper pastes for next-generation electronics: a review

Xinyi Shi, Songtang Li, Su Ding, Minggang Li, Junfeng Sun, Ke Li and Wanli Li

J. Mater. Chem. C, 2026, 14, 4696
DOI: 10.1039/D5TC04491J

Inkjet printing of conductive nanomaterials on textiles for wearable electronics: Advancements, challenges, and future prospects

Bekinew Kitaw Dejene

Materials Today Advances, 2025, 28, 100629
DOI: 10.1016/j.mtadv.2025.100629

Printable Two-Dimensional Nanomaterials: Approaching Low-Cost Electrodes for High-Efficiency Li/Na-Ion Batteries and Photodetectors

Ruei-Hong Cyu, Chuan-Hsun Wang, Arumugam Manikandan, Shu-Chi Wu, Shin-Yi Tang, Po-Wen Chiu, Ray-Hua Horng and Yu-Lun Chueh

ACS Appl. Nano Mater., 2025, 8, 8133
DOI: 10.1021/acsanm.5c00590

Nanomaterial‐Based Inkjet Printing for Electrochemical Sensing

David Panáček, Massimo Urban, Alessandro Silvestri, Ivan Dědek, Martin‐Alex Nalepa, Arben Merkoçi, Maurizio Prato and Michal Otyepka

Small, 2026, 22
DOI: 10.1002/smll.202513028

A Review of Manufacturing Methods for Flexible Devices and Energy Storage Devices

Yuntao Han, Yunwei Cui, Xuxian Liu and Yaqun Wang

Biosensors, 2023, 13, 896
DOI: 10.3390/bios13090896

Recent advances in biodegradable printed sensors for sustainable electronics

Danish Tahir, Milad Razbin, Chen Sang, Xuan Li, Shuhua Peng and Shuying Wu

Advanced Nanocomposites, 2026, 3, 109
DOI: 10.1016/j.adna.2026.01.002

Piezoelectric inkjet printing: The principles, fluid dynamics challenges, and applications

Jiuxin Zhang, Hongtao Zhu, Dun Liu, Yanheng Li and Chuanzhen Huang

Materials Today Communications, 2024, 41, 110866
DOI: 10.1016/j.mtcomm.2024.110866

A Review of Electroactive Nanomaterials in the Detection of Nitrogen-Containing Organic Compounds and Future Applications

Mohanraj Jagannathan, Durgalakshmi Dhinasekaran, Ajay Rakkesh Rajendran and Sungbo Cho

Biosensors, 2023, 13, 989
DOI: 10.3390/bios13110989

Adhesion nanoarchitectonics of inkjet-printed silver nanoparticles on various substrates after furnace sintering

Taepyo Lim, Hee-Lak Lee, Kyongtae Ryu, Yoon-Jae Moon, Jun Young Hwang and Seung Jae Moon

Appl. Phys. A, 2024, 130
DOI: 10.1007/s00339-024-07352-7

Miniaturizing Laser‐Induced Graphene for Biosensors by Spatial Control of Initiation and Side‐Selective Microfabrication on Commercial Polymers

Soumalya Ghosh, Mirza Sahaluddin, Moataz Abdulhafez, May Yoon Pwint, Xinyan Tracy Cui and Mostafa Bedewy

Adv Materials Technologies, 2026, 11
DOI: 10.1002/admt.202502433

Graphene derivative-based ink advances inkjet printing technology for fabrication of electrochemical sensors and biosensors

Martin-Alex Nalepa, David Panáček, Ivan Dědek, Petr Jakubec, Vojtěch Kupka, Vítězslav Hrubý, Martin Petr and Michal Otyepka

Biosensors and Bioelectronics, 2024, 256, 116277
DOI: 10.1016/j.bios.2024.116277

Laser Sintering by Spot and Linear Optics for Inkjet-Printed Thin-Film Conductive Silver Patterns with the Focus on Ink-Sets and Process Parameters

Dana Mitra, Kalyan Yoti Mitra, Georg Buchecker, Alexander Görk, Maxim Mousto, Thomas Franzl and Ralf Zichner

Polymers, 2024, 16, 2896
DOI: 10.3390/polym16202896

Alternative Micro/Nanofabrication Approaches for Wearable Electronics

Jianxin Zhang and Minqiang Wang

Chem. Rev., 2026, 126, 1686
DOI: 10.1021/acs.chemrev.5c00801

High-Resolution Printing of Various Electronic Materials by Electrophotography

Chen Yi Ngu, Kaito Kozuki, Hinata Oshida, Sang Bin Lee, Raiki Hanazaki, Sayaka Kado, Kazuhiro Kudo and Masatoshi Sakai

Applied Sciences, 2024, 14, 2668
DOI: 10.3390/app14062668

Inkjet-printed strain sensors for monitoring cylindrical pressure vessels

Youri Nouchokgwe, Torsten Granzow, Stephanie Girod, Sebastien Gergen, Olivier Bouton, Emmanuel Defay, Veronika Kovacova and Sebastjan Glinsek

APL Electronic Devices, 2025, 1
DOI: 10.1063/5.0279607

Advanced Layer Fabrication Technologies in Solid Oxide Fuel Cells: From Traditional Methods to Additive and Thin-Film Strategies

Serikzhan Opakhai, Asset Kabyshev, Marzhan Kubenova, Zhassulan Zeinulla, Bakytbek Mauyey and Saira Sakhabayeva

Nanoenergy Advances, 2025, 6, 2
DOI: 10.3390/nanoenergyadv6010002

Emerging Bioprinting for Wound Healing

Zijian Wang, Xiao Liang, Guanyi Wang, Xinghuan Wang and Yun Chen

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202304738

Dynamic structural regulation and multifunctional integration of 3D printed soft matter via metal coordination strategies

Xin Luo, Wenzhe Xiao, Kai Wang, Yuting Shi, Weidong Zhao, Jing Yang and Jian Sun

Coordination Chemistry Reviews, 2026, 551, 217490
DOI: 10.1016/j.ccr.2025.217490

A review of chalcogenide-based perovskites as the next novel materials: Solar cell and optoelectronic applications, catalysis and future perspectives

George G. Njema and Joshua K. Kibet

Next Nanotechnology, 2025, 7, 100102
DOI: 10.1016/j.nxnano.2024.100102

Inkjet-Printed Flexible, Sensitive Humidity Sensor with High Breathability on Electrospun Nanofibrous Mats

Yu Liu, Lei Xing, Hongze Zhu, Guangya Liu, Junyi Ren and Bin Sun

Fibers Polym, 2024, 25, 1691
DOI: 10.1007/s12221-024-00552-1

Patterned durable superhydrophobic and UV protective cotton fabric prepared through inkjet printing of Zn-based MOFs and long alkyl chain siloxane

Zhenjie Wang, Yuwei Guo, Xiyu Song, Chuliang Shen, Yijun Jiang and Ruyi Xie

International Journal of Biological Macromolecules, 2025, 289, 138684
DOI: 10.1016/j.ijbiomac.2024.138684

Advancing MXene-based integrated microsystems with micro-supercapacitors and/or sensors: Rational design, key progress, and challenging perspectives

Jin Jia, Yuanyuan Zhu, Pratteek Das, Jiaxin Ma, Sen Wang, Guang Zhu and Zhong-Shuai Wu

Journal of Materiomics, 2023, 9, 1242
DOI: 10.1016/j.jmat.2023.08.013

A Flexible Low Dropout Regulator Based on InSnO Thin-Film Transistors With Superior Bending Robustness and Ultra-Low Quiescent Current

Tingrui Huang, Zuoxu Yu, Yuzhen Zhang, Di Gui, Mingming Liu, Kaizhi Sui, Wenting Xu, Guangan Yang, Wangran Wu and Weifeng Sun

IEEE Electron Device Lett., 2025, 46, 592
DOI: 10.1109/LED.2025.3539285

Flexible InGaAs/InAlAs avalanche photodiodes for short-wave infrared detection

Jishen Zhang, Rui Shao, Haiwen Xu, Kian Hua Tan, Satrio Wicaksono, Qiwen Kong, Gong Zhang, Chen Sun, Yue Chen, Aaron Danner, Soon-Fatt Yoon and Xiao Gong

Nat Commun, 2025, 16
DOI: 10.1038/s41467-025-64401-2

Fully Inkjet‐Printed, Flexible TIPS‐Pentacene Photodetector for Photoplethysmogram

Shan Wei, Hyung Woo Choi, Ghassan Jabbour, Arokia Nathan and Jun Yu

Advanced Optical Materials, 2025, 13
DOI: 10.1002/adom.202501942

Measurement of inkjet droplet speed using interference fringe by diffracted light

Dong Yeol Shin, Yoon Jae Moon, Byeong-Kwon Ju and Kyung-Tae Kang

Sci Rep, 2024, 14
DOI: 10.1038/s41598-024-71952-9

Laser-sintered silver nanoparticles–photopolymer composites for free-standing and wearable conductive films with their application to strain sensor

Seung-Hyeon Choi, Min-Hyeong Lee, Ji-Su Park, Chung-Soo Kim and Gil-Yong Lee

Composites Part B: Engineering, 2026, 311, 113197
DOI: 10.1016/j.compositesb.2025.113197

Laser-Induced High-Throughput Printing of Liquid Metal

Yanzhen Zhang, Mingyu Yan, Jianhao Zhu and Haifeng Zang

ACS Appl. Electron. Mater., 2023, 5, 6094
DOI: 10.1021/acsaelm.3c01065

Facile Fabrication of Carbon Nanocolloid‐Silver Composite Ink for the Application of All Inkjet‐Printed Wearable Electronics

Xiyue Chen, Ruxue Yang, Xinchun Luo, Hailong Cheng and Xin Wu

Advanced Sensor Research, 2023, 2
DOI: 10.1002/adsr.202300079

Insights on enhancing the adhesion of inkjet-printed europium-doped yttrium oxide by tailoring interfacial bonding environments

Yujuan He, Jeffrey A. Dhas, Kijoon Lee, Milad Ghayoor, V. Vinay K. Doddapaneni, Anton T. Escher, Somayeh Pasebani, Brian K. Paul and Chih-hung Chang

Materials & Design, 2025, 252, 113810
DOI: 10.1016/j.matdes.2025.113810

Array‐Integrated Perovskite X‐Ray Detectors: Advances, Challenges, and Perspectives

Jing Li, Yongjing Zhou, Yucheng Huang, Xi Chen, Xue Zheng, Weimin Li, Jie Zhang, Chunlei Yang and Ming Chen

Small Methods, 2026, 10
DOI: 10.1002/smtd.202502291

Unveiling the deposition mechanism of ultra-thin graphene oxide flakes in an aqueous colloidal phase

Jeonghan Kim, Seonha Park, Mingi Choi, Habeom Lee and Songkil Kim

Applied Surface Science, 2025, 713, 164307
DOI: 10.1016/j.apsusc.2025.164307

Inkjet Printing for Batteries and Supercapacitors: State-of-the-Art Developments and Outlook

Juan C. Rubio and Martin Bolduc

Energies, 2025, 18, 5348
DOI: 10.3390/en18205348

Jung-Hoon Yun and Oluwabukola Adebisi

Multiscale Sci. Eng., 2023, 5, 126
DOI: 10.1007/s42493-024-00099-6

Smart Printed Triboelectric Wearable Sensor with High Performance for Glove-Based Motion Detection

Parinaz Seifaddini, Sina Sheikhahmadi, Mohammadreza Kolahdouz and Hossein Aghababa

ACS Appl. Mater. Interfaces, 2024, 16, 9506
DOI: 10.1021/acsami.3c17419

Enhanced droplet volume of material jetting based on bipolar waveform optimization

Xiaopei Wang, Hongzhi Guo, Hongmiao Tian, Chao Yan, Chunhui Wang, Xiangming Li, Xiaoliang Chen and Jinyou Shao

Journal of Manufacturing Processes, 2025, 141, 580
DOI: 10.1016/j.jmapro.2025.03.032

Toward submicron inkjet-printed ZnO microdots with suppressed coffee-ring effect via controlled drying conditions for potential solar cell applications

Kyungsik Kim, Jun-ho Jang, Soonil Hong, Hongkyu Kang and Jinho Lee

Journal of Materials Research and Technology, 2024, 31, 3480
DOI: 10.1016/j.jmrt.2024.07.084

Advanced processing techniques for electric field-guided electrospinning of self-organized Ag nanoparticle electrodes for real-time humidity and temperature sensing

Assareeya Aoboun, Chiravoot Pechyen and Dong-Youn Shin

Smart Mater. Struct., 2025, 34, 025008
DOI: 10.1088/1361-665X/ada2ca

Research on Parylene-C application to wearable organic electronics: in the respect of substrate type

Benliang Hou, Yea Eun Lee, Do Hyeon Kim, Heqing Ye, Hyeok-jin Kwon and Se Hyun Kim

Macromol. Res., 2025, 33, 185
DOI: 10.1007/s13233-024-00328-9

Inside out: Exploring edible biocatalytic biosensors for health monitoring

Verdiana Marchianò, Angelo Tricase, Alessandra Cimino, Blanca Cassano, Michele Catacchio, Eleonora Macchia, Luisa Torsi and Paolo Bollella

Bioelectrochemistry, 2025, 161, 108830
DOI: 10.1016/j.bioelechem.2024.108830

Recent Research on Preparation and Application of Smart Joule Heating Fabrics

Chunfa Ye, Longqi Zhao, Sihui Yang and Xiaoyan Li

Small, 2024, 20
DOI: 10.1002/smll.202309027

Inkjet-Printed NiO/ZnO Heterojunction MEMS Acetone Sensor for Non-invasive Diabetes Diagnosis and Monitoring of Diabetic States

Tongna Ge, Dawu Lv, Samra Jabeen, Xiaoquan Hu, Xiaoyue Xu, Jin Zhang, Weijie Song, Ruijin Yu and Wenfeng Shen

Sensors and Actuators A: Physical, 2026, 118035
DOI: 10.1016/j.sna.2026.118035

Design and simulation of a hybrid inkjet printhead for ejecting high viscous inks

Muhammad Ali Shah, Youngsoo Kim, Syed Turab Haider Zaidi, Youngjin Lee, Duck-Gyu Lee and Shin Hur

Microsyst Technol, 2025, 31, 1411
DOI: 10.1007/s00542-024-05785-x

Filming evolution dynamics of Hg nanodroplets mediated at solid-gas and solid-liquid interfaces by in-situ TEM

Linfeng Xu, Zetan Cao, Zhiwen Liu, Cheng Zheng, Simin Peng, Yong Lu, Haoran Liu and Bin Chen

Nat Commun, 2025, 16
DOI: 10.1038/s41467-025-59063-z

Intrinsically soft electronics using conducting nanomaterials and liquid metals

Sung-Hyuk Sunwoo, Hye Jin Kim, Jae Hyuk Kim, Dong Chan Kim and Dae-Hyeong Kim

NPG Asia Mater, 2025, 17
DOI: 10.1038/s41427-025-00621-8

Wearable Flexible Cold Atmospheric Plasma Devices: Key Technologies and Medical Application Prospects

Xinyi Zhang, Jia Ren, Miao Lyu, Qiaojue Liu and Shuqun Wu

Adv Materials Technologies, 2026
DOI: 10.1002/admt.202502333

A new route to fabricate flexible, breathable composites with advanced thermal management capability for wearable electronics

Huibao Chen, Yafei Ding, Guimei Zhu, Yu Liu, Qun Fang, Xue Bai, Yan Zhao, Xin Li, Xingyi Huang, Tong-Yi Zhang, Baowen Li and Bin Sun

npj Flex Electron, 2023, 7
DOI: 10.1038/s41528-023-00257-0

Intrinsically Soft Implantable Electronics for Long‐term Biosensing Applications

Su Hyeon Lee, Hyo Jin Lee, Sohye Lee, Dae‐Hyeong Kim, Hye Jin Kim and Sung‐Hyuk Sunwoo

Advanced Sensor Research, 2025, 4
DOI: 10.1002/adsr.202500002

Photocatalysis‐Assisted Silver Reduction via ZnO Nanoparticles for High‐Resolution, Flexible, and Etch‐Free Printed Electronics

Thi Tu Linh To, Thuy‐Kieu Truong, Ly Thi Trinh, Pyeongsam Ko, Kyoohee Woo, Sin Kwon, Jinsung Rho and Hongseok Youn

Small, 2026, 22
DOI: 10.1002/smll.202511791

Wafer-Recyclable, Eco-Friendly, and Multiscale Dry Transfer Printing by Transferable Photoresist for Flexible Epidermal Electronics

Yu Zhou, Bo Feng, Lei Chen, Fu Fan, Zhiqiang Ji and Huigao Duan

ACS Appl. Mater. Interfaces, 2024, 16, 13525
DOI: 10.1021/acsami.3c18576

Solution-Processable and Eco-Friendly Functionalization of Conductive Silver Nanoparticles Inks for Printable Electronics

Sonia Ceron, David Barba and Miguel A. Dominguez

Electronic Materials, 2024, 5, 45
DOI: 10.3390/electronicmat5020004

An acrylate resin/perfluoropolyether film with enhanced hydrophobicity and lowered adhesion surface for precision printed electronics

Hui Xu, Ke Shui, Xin Li, Subin Jiang, Qingyuan Li, Ni Yin, Zhiyun Li, Yabin Zhang, Jian Lin, Qi Chen, Song Qiu, Fengqi Guo and Chang-Qi Ma

Flex. Print. Electron., 2025, 10, 045005
DOI: 10.1088/2058-8585/ae0d9d

The outlook of flexible DBD-plasma devices: Applications in food science and wound care solutions

Thu Minh Nguyen, Neha Kaushik, Tung Thanh Nguyen, Eun Ha Choi, Linh Nhat Nguyen and Nagendra Kumar Kaushik

Materials Today Electronics, 2024, 7, 100087
DOI: 10.1016/j.mtelec.2023.100087

4D Printing of Highly Maneuverable Robots: Controllable Power Amplification Behaviours of Stimulus‐Response Materials

Guiwei Li, Yuxuan Feng, Jerry Ying Hsi Fuh, Qingping Liu, Ji Zhao, Wenzheng Wu, Feifei Chen, Lei Ren and Luquan Ren

Advanced Materials, 2026, 38
DOI: 10.1002/adma.202516070

Towards robust flexible electronics: Fabrication approaches and ongoing research challenges

Babatunde Olamide Omiyale, Akinola Ogbeyemi, Muhammad Awais Ashraf, Ki-Young Song and Wenjun Chris Zhang

Sensors and Actuators A: Physical, 2025, 395, 117053
DOI: 10.1016/j.sna.2025.117053

A review of functional E-jet inks for manufacturing flexible sensors

Ke Xu and Zixuan Zhang

J Mater Sci, 2024, 59, 12899
DOI: 10.1007/s10853-024-09979-6

Rim destabilisation and re-formation upon severance from its fragmenting expanding sheet

M. Kharbedia, B. Liu, R. Meijer, D.J. Engels, K. Schubert, L. Bourouiba and O. Versolato

J. Fluid Mech., 2026, 1030
DOI: 10.1017/jfm.2026.11176

Advances in printing techniques for thermoelectric materials and devices

Min Hong, Shuai Sun, Wanyu Lyu, Meng Li, Weidi Liu, Xiao-Lei Shi and Zhi-Gang Chen

Soft Sci, 2023, 3
DOI: 10.20517/ss.2023.20

Additively manufactured electrothermal thin-film heaters for on-chip isothermal DNA amplification

Shreyas Inamdar, Alireza Sargordi, Tanzila Kamal Choity, Anahita Emami, Jun Young Kim, Hong-Gu Kang and Namwon Kim

Sensors and Actuators A: Physical, 2026, 399, 117434
DOI: 10.1016/j.sna.2025.117434

Control of Meniscus Formation Using an Electrohydrodynamics Module in Roll-to-Roll Systems for the Stable Coating of Functional Layers

Minjae Kim, Minho Jo, Jaehyun Noh, Sangbin Lee, Junyoung Yun, Gyoujin Cho and Changwoo Lee

Polymers, 2024, 16, 845
DOI: 10.3390/polym16060845

Research progress of different printing techniques based on Ln3+ ions doped up-conversion fluorescence ink

Keke Wang, Haihan Fan, Lanlan Fan, Jianfeng Liu, Liuyimei Yang, Shixian Xiong and Baixiong Liu

Journal of Rare Earths, 2025, 43, 1303
DOI: 10.1016/j.jre.2024.06.043

Battery-free flexible wireless temperature sensing for food storage

Zhengzhong Wan, Xujun Chen, Danyao Song, Zihao Wu, Ruihua Zhang, Meng Wang and Xinqing Xiao

FlatChem, 2024, 47, 100709
DOI: 10.1016/j.flatc.2024.100709

Materials design and integration strategies for soft bioelectronics in digital healthcare

Hye Jin Kim, Ja Hoon Koo, Seunghwan Lee, Taeghwan Hyeon and Dae-Hyeong Kim

Nat Rev Mater, 2025, 10, 654
DOI: 10.1038/s41578-025-00819-w

Recent Advances in Inkjet Printing for Flexible Electronics: Technologies, Materials, Devices, and Applications

Peilin Zhou, Guangrui Xiang, Dandan Xu, Junru Ma, Qingwang Li, Hongji Guo, Jiachen Wu, Haozhe Wang, Yueqing Xia, Xiuli Zhang, Haibo Yu and Lianqing Liu

Adv Materials Technologies, 2026
DOI: 10.1002/admt.71055

Analysis of drop-on-demand printing characteristics and stability driven by inertial forces

Shengchang Tang, Xiangfu Wei, Guangyong Huang, Peng Dai, Yongchao Cai, Cuimin Sun and Hui You

Physics of Fluids, 2024, 36
DOI: 10.1063/5.0211401

Dry Film Photoresist Enabled Sustainable Large-Area Manufacturing for Flexible Electronics

Quan Wang, Lei Chen, Xiaoxue Bi, Xiaoqian Dong, Jianfei Xie, Bo Feng and Huigao Duan

ACS Appl. Mater. Interfaces, 2025, 17, 49976
DOI: 10.1021/acsami.5c09006

Electrochemically Scalable Synthesis of Oxygen-Functionalized Graphene Nanosheets as Conductive Inks for 3D-Printed Electronic Devices

Nguyen Anh Duc, Nguyen Thanh Hai, Nguyen Dinh Dung, Nguyen Tuan Hong, Truong Ngoc Minh, Doan Thanh Tung, Hoang Tran Dung, Nguyen Ngoc Thanh, Phan Ngoc Minh, Le Trong Lu and Phan Ngoc Hong

J. Electron. Mater., 2026, 55, 4324
DOI: 10.1007/s11664-026-12694-4

Wearable wireless directed printed sensor system for early extravasation detection

Yun-Hsuan Lin, Hsiao-Ling Yang and Ying-Chih Liao

Sensors and Actuators A: Physical, 2026, 402, 117611
DOI: 10.1016/j.sna.2026.117611

Transparent and Transient Flexible Electronics

Nitheesh M. Nair, Ayoub Zumeit and Ravinder Dahiya

Advanced Science, 2025, 12
DOI: 10.1002/advs.202505133

Flexible ITO TFTs with high mobility of 39.1 cm2·V−1·s−1 and excellent uniformity fabricated via mass-production compatible process

Zuoxu Yu, Yuzhen Zhang, Tingrui Huang, Wenting Xu, Mingming Liu, Di Gui, Kaizhi Sui, Guangan Yang, Weifeng Sun, Runxiao Shi and Wangran Wu

J. Semicond., 2026, 47, 032304
DOI: 10.1088/1674-4926/25060021

Inkjet-Printed Multiwalled Carbon Nanotube Dispersion as Wireless Passive Strain Sensor

Abderrahmane Benchirouf and Olfa Kanoun

Sensors, 2024, 24, 1585
DOI: 10.3390/s24051585

The Interaction of Femtosecond Laser with Perovskites for Advanced Photonics

Beibei Xu, Tao Man, Xintong Yu, Xinyu Cai, Zehui Zhou, Dezhi Tan and Jianrong Qiu

Advanced Photonics Research, 2024, 5
DOI: 10.1002/adpr.202400047

Inkjet Printing Preparation of AgCuTe Thermoelectric Thin Films

Botao ZHANG, Tingting SUN, Lianjun WANG and Wan JIANG

Journal of Inorganic Materials, 2024, 39, 1325
DOI: 10.15541/jim20240156

Pencil lead-based wearable sensing platform for noninvasively monitoring sweat biomarkers

Jiajia Li and Xiangjie Bo

Analytica Chimica Acta, 2025, 1375, 344588
DOI: 10.1016/j.aca.2025.344588

State of the art challenges and prospects of advanced materials in radiation detection for nuclear energy: a review

Kamal Asghar, Miguta Faustine Ngulimi, Sion Kim, Bum Kyoung Seo, Guillaume H.V. Bertrand and Changhyun Roh

Progress in Materials Science, 2026, 158, 101616
DOI: 10.1016/j.pmatsci.2025.101616

Printing of liquid metal by laser-induced thermal bubble at the liquid–liquid interface

Mingyu Yan, Yanzhen Zhang, Jianhao Zhu, Haifeng Zang, Zhuochen Ding, Xiaodi Zhao and Runsheng Li

Physics of Fluids, 2023, 35
DOI: 10.1063/5.0181931

Surface Energy‐Confined Multi‐Layer Inkjet Printing for Customizable Optical Microstructures

Kaixuan Li, Xiao Deng, Wanling Liu, Huizeng Li, Maoxiong Zhao, Renxuan Yuan, Zhe Wang, An Li, Quan Liu, Dongyu Yang, Yunxia Liu, Tianrui Zhai, Joel K. W. Yang, Yanlin Song and Cheng‐Wei Qiu

Advanced Materials, 2025, 37
DOI: 10.1002/adma.202509818

Progress of Carbazole-Based electrochromic Polymers: Polymerization Strategies, structural regulation for applications

Shihao Ma, Tingting Zhou, Tianyu Sun, Wanan Cai, Haijun Niu and Wen Wang

European Polymer Journal, 2026, 248, 114608
DOI: 10.1016/j.eurpolymj.2026.114608

Laser Beam Machining of Janus Porous Electrodes for Long‐term Electrophysiological Sensing

Yu Zhou, Zaifu Huang, Yan Chen, Xiaoqian Dong, Fu Fan, Lei Chen and Bo Feng

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202401812