Issue 2, 2020

Transport mechanism of copper sulfide embedded carbon nitride thin films: a formation free memristor

Abstract

Nonvolatile electrical resistive behaviour was demonstrated for a copper sulfide nanoparticle decorated carbon nitride (CSCN) based device. The copper sulfide–carbon nitride composite system was synthesized using a high temperature in situ protocol, where the sulfide particles were highly dispersed on the carbon nitride matrix. The CSCN composite was characterized by using different analytical techniques. The transport mechanism of the device followed Poole–Frenkel (PF) for the OFF-state, whereas ohmic behaviour dominated for the ON-state. An endurance study of the device was performed with a duty-cycle of 50% for 2 × 103 cycles and the nonvolatile behavior of the device was studied with a duty-cycle of 0.16% for 2 × 103 s. Both the endurance and nonvolatile behavior exhibited excellent stability of the device with an ON to OFF ratio of 104.

Graphical abstract: Transport mechanism of copper sulfide embedded carbon nitride thin films: a formation free memristor

Supplementary files

Article information

Article type
Paper
Submitted
29 vas. 2020
Accepted
13 bal. 2020
First published
14 bal. 2020
This article is Open Access
Creative Commons BY-NC license

Mater. Adv., 2020,1, 228-234

Transport mechanism of copper sulfide embedded carbon nitride thin films: a formation free memristor

V. K. Perla, S. K. Ghosh and K. Mallick, Mater. Adv., 2020, 1, 228 DOI: 10.1039/D0MA00062K

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements