Issue 8, 2013

Assemblies of silver nanocubes for highly sensitive SERS chemical vapor detection

Abstract

We suggest that silver nanocube (AgNC) aggregates within cylindrical pores (PAM–AgNC) can be employed as efficient nanostructures for highly efficient, robust, tunable, and reusable surface-enhanced Raman scattering (SERS) substrates for trace level organic vapor detection which is a challenging task in chemical detection. We demonstrate the ability to tune both the detection limit and the onset of signal saturation of the substrate by switching the adsorption behavior of AgNCs between highly aggregated and more disperse by varying the number of adsorption-mediating polyelectrolyte bilayers on the pore walls of the membrane. The different AgNC distributions show large differences in the trace vapor detection limit of the common Raman marker benzenethiol (BT) and a widely used explosive binder N-methyl-4-nitroaniline (MNA), demonstrating the importance of the large electromagnetic field enhancement associated with AgNC coupling. The SERS substrate with highly aggregated AgNCs within the cylindrical pores allows for consistent trace detection of mid ppb (∼500) for BT analyte, and a record limit of detection of low ppb (∼3) for MNA vapors with an estimated achievable limit of detection of approximately 600 ppt. The dispersed AgNC aggregates do not saturate at higher ppb concentrations, providing an avenue to distinguish between higher ppb concentrations and increase the effective range of the SERS substrate design. A comparison between the AgNC substrate and an electroless deposition substrate with silver quasi-nanospheres (PAM–AgNS) also demonstrates a higher SERS activity, and better detection limit, by the nanocube aggregates. This is supported by FDTD electromagnetic simulations that suggest that the higher integrated electromagnetic field intensity of the hot spots and the large specific interfacial areas impart greatly improved SERS for the AgNCs. Moreover, we demonstrated that the AgNC substrate can be reused multiple times without significant loss of SERS activity which opens up new avenues for in-field monitoring.

Graphical abstract: Assemblies of silver nanocubes for highly sensitive SERS chemical vapor detection

Supplementary files

Article information

Article type
Paper
Submitted
28 Oki 2012
Accepted
13 Des 2012
First published
13 Des 2012

J. Mater. Chem. A, 2013,1, 2777-2788

Assemblies of silver nanocubes for highly sensitive SERS chemical vapor detection

R. Kodiyath, S. T. Malak, Z. A. Combs, T. Koenig, M. A. Mahmoud, M. A. El-Sayed and V. V. Tsukruk, J. Mater. Chem. A, 2013, 1, 2777 DOI: 10.1039/C2TA00867J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements