Issue 4, 2024

3D simulation of conductive nanofilaments in multilayer h-BN memristors via a circuit breaker approach

Abstract

A 3D simulation of conductive nanofilaments (CNFs) in multilayer hexagonal-BN memristors is performed. To do so, a simulation tool based on circuit breakers is developed including for the first time a 3D resistive network. The circuit breakers employed can be modeled with two, three and four resistance states; in addition, a series resistance and a module to account for quantum effects, by means of the quantum point contact model, are also included. Finally, to describe real dielectric situations, regions with a high defect density are modeled with a great variety of geometrical shapes to consider their influence in the resistive switching (RS) process. The simulator has been tuned with measurements of h-BN memristive devices, fabricated with chemical-vapour-deposition grown h-BN layers, which were electrically and physically characterized. We show the formation of CNFs that produce filamentary charge conduction in our devices. Moreover, the simulation tool is employed to describe partial filament rupture in reset processes and show the low dependence of the set voltage on the device area, which is seen experimentally.

Graphical abstract: 3D simulation of conductive nanofilaments in multilayer h-BN memristors via a circuit breaker approach

Article information

Article type
Communication
Submitted
03 Nov 2023
Accepted
01 Des 2023
First published
02 Des 2023
This article is Open Access
Creative Commons BY-NC license

Mater. Horiz., 2024,11, 949-957

3D simulation of conductive nanofilaments in multilayer h-BN memristors via a circuit breaker approach

D. Maldonado, A. Cantudo, F. M. Gómez-Campos, Y. Yuan, Y. Shen, W. Zheng, M. Lanza and J. B. Roldán, Mater. Horiz., 2024, 11, 949 DOI: 10.1039/D3MH01834B

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements