Issue 47, 2020

Voltage bias stress effects in metal halide perovskites are strongly dependent on morphology and ion migration pathways

Abstract

The solar-to-power power conversion efficiencies (PCEs) of metal halide perovskites (MHP) have improved over the last decade using a wide variety of methods, including composition manipulation, dopant introduction, and interfacial buffers. These methods, however, have taken little regard for the electronic and interfacial effects such alterations may cause within devices under voltage bias stress – a condition required for most device operation. We investigate how halide and cation substitution in MHP structures [specifically, CH3NH3PbI2.87Cl0.13 and Cs0.1(MA0.17FA0.83)0.9Pb(I0.83Br0.17)3] effects the current behavior of devices while under a range of voltage bias stress in both light and dark conditions. Conducting in depth investigations into the electronic and morphological differences between these two MHP devices, we confirmed their unique voltage bias stress effects are due to intrinsic behavior within the perovskite structure. Importantly, we also determined how crystallite orientation can influence ion migration and therefore alter charge transport and current stability in MHP photovoltaic devices.

Graphical abstract: Voltage bias stress effects in metal halide perovskites are strongly dependent on morphology and ion migration pathways

Supplementary files

Article information

Article type
Paper
Submitted
24 Oki 2020
Accepted
19 Nov 2020
First published
20 Nov 2020

J. Mater. Chem. A, 2020,8, 25109-25119

Author version available

Voltage bias stress effects in metal halide perovskites are strongly dependent on morphology and ion migration pathways

L. Flannery, J. Ogle, D. Powell, C. Tassone and L. Whittaker-Brooks, J. Mater. Chem. A, 2020, 8, 25109 DOI: 10.1039/D0TA10371C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements