Issue 17, 2015

Perovskite-based solar cells: impact of morphology and device architecture on device performance

Abstract

Organic–inorganic metal halide perovskites have recently shown great potential for application in solar cells with excitingly high performances with an up-to-date NREL-certified record efficiency of 20.1%. This family of materials has demonstrated considerable prospects in achieving efficiencies comparable to or even better than those of thin film solar cells. The remarkable performances thus far seem not to be limited to any specific device architecture. Both mesoscopic and planar cells showed good device performance and this eventually leads to the inevitable comparison between both architectures. Regardless of device architecture, device performance is highly dependent on the film morphology. The factors influencing the film morphology such as the deposition method, material composition, additives and film treatment will be discussed extensively in this review. The key to obtaining good-quality film morphology and hence performance is to essentially lower the energy barrier for nucleation and to promote uniform growth of the perovskite crystals. A comparison of the material selection for various layers as well as their corresponding impact on the perovskite film and device behavior in both device architectures will be presented.

Graphical abstract: Perovskite-based solar cells: impact of morphology and device architecture on device performance

Article information

Article type
Review Article
Submitted
01 Oki 2014
Accepted
17 Des 2014
First published
18 Des 2014

J. Mater. Chem. A, 2015,3, 8943-8969

Author version available

Perovskite-based solar cells: impact of morphology and device architecture on device performance

T. Salim, S. Sun, Y. Abe, A. Krishna, A. C. Grimsdale and Y. M. Lam, J. Mater. Chem. A, 2015, 3, 8943 DOI: 10.1039/C4TA05226A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements