Issue 17, 2015

Opto-electronic properties of TiO2 nanohelices with embedded HC(NH2)2PbI3 perovskite solar cells

Abstract

A HC(NH2)2PbI3 solar cell of perovskite structure based on TiO2 nanohelices has been developed. Well-aligned helical TiO2 arrays of different pitch (p) and radius (r), helix-1 (p/2 = 118 nm, r = 42 nm), helix-2 (p/2 = 353 nm, r = 88 nm) and helix-3 (p/2 = 468 nm, r = 122 nm), were grown on fluorine-doped tin oxide (FTO) glass by oblique-angle electron beam evaporation. HC(NH2)2PbI3 perovskite was deposited on the TiO2 nanohelices by a two-step dipping method. Helix-1 showed higher short-circuit current density (JSC), whereas helix-3 exhibited slightly higher open-circuit voltage (VOC). HC(NH2)2PbI3 perovskite combined with helix-1 demonstrated an average power conversion efficiency of 12.03 ± 0.07% due to its higher JSC compared to helix-2 and helix-3. The higher JSC of helix-1 could be attributed to its greater light scattering efficiency and higher absorbed photon-to-current conversion efficiency. In addition, despite having the longest pathway structure, helix-1 showed rapid electron diffusion, attributed to its higher charge injection efficiency due to the larger contact area between perovskite and TiO2. We have established that fine tuning of the interface between perovskite and the electron-injecting oxide is a crucial factor in achieving a perovskite solar cell of high performance.

Graphical abstract: Opto-electronic properties of TiO2 nanohelices with embedded HC(NH2)2PbI3 perovskite solar cells

Article information

Article type
Paper
Submitted
21 Seb 2014
Accepted
12 Nov 2014
First published
21 Nov 2014

J. Mater. Chem. A, 2015,3, 9179-9186

Opto-electronic properties of TiO2 nanohelices with embedded HC(NH2)2PbI3 perovskite solar cells

J. Lee, S. H. Lee, H. Ko, J. Kwon, J. H. Park, S. M. Kang, N. Ahn, M. Choi, J. K. Kim and N. Park, J. Mater. Chem. A, 2015, 3, 9179 DOI: 10.1039/C4TA04988H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements