Issue 9, 2022

Design of carbon–ceramic composite membranes with tunable molecular cut-offs from a carboxylic benzoxazine ligand chelated to silica–zirconia

Abstract

Carbon molecular sieve and composite carbon molecular sieving membranes are fabricated via the traditional methods of pyrolyzing polymers or by using preceramic composite polymers bearing macromolecular structures. Scant attention is paid to the design of the precursor structures in the tailoring of these membranes. In this study, a preceramic resin sol was formed using separate precursors that included vinyltrimethoxysilane (VTMS), zirconium n-butoxide (ZrTB), and a carboxylic benzoxazine ligand–3-(3-oxo-1,4-benzoxazin-4-yl)propanoic acid (BZPA), which was analyzed via FTIR. Additional XPS analysis revealed the formation of sp2 hybridized carbon structures after pyrolysis of the preceramic resin between 550 and 850 °C. A composite VTMS–ZrTB–BZPA resin sol was used to fabricate thin carbon–ceramic membranes with molecular sieving performances that could be tuned via the pyrolysis temperature, and H2/SF6 and H2/CH4 selectivities of 104 and 102, respectively, were achieved. This work offers a flexible method for the fabrication of high-performance carbon–ceramic composite membranes by focusing on the ground-up design of precursor preceramic polymer structures in addition to processing parameters.

Graphical abstract: Design of carbon–ceramic composite membranes with tunable molecular cut-offs from a carboxylic benzoxazine ligand chelated to silica–zirconia

Supplementary files

Article information

Article type
Communication
Submitted
02 Maa 2022
Accepted
27 Juu 2022
First published
28 Juu 2022

Mol. Syst. Des. Eng., 2022,7, 1030-1038

Design of carbon–ceramic composite membranes with tunable molecular cut-offs from a carboxylic benzoxazine ligand chelated to silica–zirconia

S. O. Lawal, H. Nagasawa, T. Tsuru and M. Kanezashi, Mol. Syst. Des. Eng., 2022, 7, 1030 DOI: 10.1039/D2ME00078D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements