Issue 5, 2013

Magnesium and magnesium-silicide coated silicon nanowire composite anodes for lithium-ion batteries

Abstract

We synthesized composites consisting of silicon nanowires (SiNWs) coated with magnesium (Mg) and magnesium silicide (Mg2Si) for lithium-ion battery anodes and studied their electrochemical cycling stability and degradation mechanisms. Compared to bare SiNWs, both Mg- and Mg2Si-coated materials show significant improvement in coulombic efficiency during cycling, with pure Mg coating being slightly superior by ∼1% in each cycle. XPS measurements on cycled nanowire forests gave quantitative information on the composition of the SEI layer and showed lower Li2CO3 and higher polyethylene oxide content for coated nanowires, thus revealing a passivating effect towards electrolyte decomposition. Extensive characterization of the microstructure before and after cycling was carried out by scanning- and transmission electron microscopy aided by focused ion beam cross-sectioning. The formation of large voids between the nanowire assembly and the substrate during cycling, causing the nanowires to lose electrical contact with the substrate, is identified as an important degradation mechanism.

Graphical abstract: Magnesium and magnesium-silicide coated silicon nanowire composite anodes for lithium-ion batteries

Supplementary files

Article information

Article type
Paper
Submitted
19 Oki 2012
Accepted
23 Nov 2012
First published
27 Nov 2012

J. Mater. Chem. A, 2013,1, 1600-1612

Magnesium and magnesium-silicide coated silicon nanowire composite anodes for lithium-ion batteries

A. Kohandehghan, P. Kalisvaart, M. Kupsta, B. Zahiri, B. S. Amirkhiz, Z. Li, E. L. Memarzadeh, L. A. Bendersky and D. Mitlin, J. Mater. Chem. A, 2013, 1, 1600 DOI: 10.1039/C2TA00769J

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements