Direct write printing of a self-encapsulating liquid metal–silicone composite

Taylor V. Neumann, Emily G. Facchine, Brian Leonardo, Saad Khan and Michael D. Dickey

Soft Matter, 2020, 16, 6608
DOI: 10.1039/D0SM00803F

Unveiling olivine cathodes for high energy-density lithium-ion batteries: a comprehensive review from the atomic level to the electrode scale

Wonchan Hwang, Jaehwan Kim, Shin-Yeong Kim, Eunseo Ko, Seojin Lee, Minseo Kim, Seung-Ho Yu, Yung-Eun Sung, Hyung-Seok Kim, Chunjoong Kim and Jungjin Park

J. Mater. Chem. A, 2024, 12, 27800
DOI: 10.1039/D4TA02338B

A novel liquid metal patterning technique: voltage induced non-contact electrochemical lithography at room temperature

Zhenwei Yu, Frank F. Yun and Xiaolin Wang

Mater. Horiz., 2018, 5, 36
DOI: 10.1039/C7MH00819H

Microfluidic blood vasculature replicas using backside lithography

Marianne Fenech, Vincent Girod, Viviana Claveria, Sebastien Meance, Manouk Abkarian and Benoit Charlot

Lab Chip, 2019, 19, 2096
DOI: 10.1039/C9LC00254E

Liquid metal-based amalgamation-assisted lithography for fabrication of complex channels with diverse structures and configurations

Sheng Yan, Yuxing Li, Qianbin Zhao, Dan Yuan, Guolin Yun, Jun Zhang, Weijia Wen, Shi-Yang Tang and Weihua Li

Lab Chip, 2018, 18, 785
DOI: 10.1039/C8LC00047F

Fabrication of PDMS microfluidic devices with 3D wax jetting

Zong'an Li, Jiquan Yang, Kelou Li, Li Zhu and Wencheng Tang

RSC Adv., 2017, 7, 3313
DOI: 10.1039/C6RA24884E

Advancing high-efficiency, stretchable organic solar cells: novel liquid metal electrode architecture

Seungbok Lee, Sungjun Oh, Seungseok Han, Dongchan Lee, Jihyung Lee, Yonghwi Kim, Hoe-Yeon Jeong, Jin-Woo Lee, Min-Ho Lee, Wu Bin Ying, Seonju Jeong, Seungjae Lee, Junho Kim, Yun Hoo Kim, Bumjoon J. Kim, Eun-chae Jeon, Taek-Soo Kim, Shinuk Cho and Jung-Yong Lee

Energy Environ. Sci., 2024, 17, 8915
DOI: 10.1039/D4EE03406F

Additive manufacturing of three-dimensional (3D) microfluidic-based microelectromechanical systems (MEMS) for acoustofluidic applications

Ellen Cesewski, Alexander P. Haring, Yuxin Tong, Manjot Singh, Rajan Thakur, Sahil Laheri, Kaitlin A. Read, Michael D. Powell, Kenneth J. Oestreich and Blake N. Johnson

Lab Chip, 2018, 18, 2087
DOI: 10.1039/C8LC00427G

Electrowetting without external voltage using paint-on electrodes

Collin B. Eaker, Ishan D. Joshipura, Logan R. Maxwell, Jason Heikenfeld and Michael D. Dickey

Lab Chip, 2017, 17, 1069
DOI: 10.1039/C6LC01500J

Dielectrowetting manipulation for digital microfluidics: creating, transporting, splitting, and merging of droplets

Hongyao Geng, Jian Feng, Lisa Marie Stabryla and Sung Kwon Cho

Lab Chip, 2017, 17, 1060
DOI: 10.1039/C7LC00006E

Non-planar PDMS microfluidic channels and actuators: a review

Yongha Hwang and Rob N. Candler

Lab Chip, 2017, 17, 3948
DOI: 10.1039/C7LC00523G

Frontiers of solvent-free functional molecular liquids

Avijit Ghosh and Takashi Nakanishi

Chem. Commun., 2017, 53, 10344
DOI: 10.1039/C7CC05883G

A handy reversible bonding technology and its application on fabrication of an on-chip liquid metal micro-thermocouple

Jie Hong, Jiahao Gong, Qian Li, Zhongshan Deng and Lin Gui

Lab Chip, 2021, 21, 4566
DOI: 10.1039/D1LC00726B

Robust, multiscale liquid-metal patterning enabled by a sacrificial sealing layer for flexible and wearable wireless powering

Long Teng, Lifei Zhu, Stephan Handschuh-Wang and Xuechang Zhou

J. Mater. Chem. C, 2019, 7, 15243
DOI: 10.1039/C9TC04876F

Fabrication of unconventional inertial microfluidic channels using wax 3D printing

Mohammad Amin Raoufi, Sajad Razavi Bazaz, Hamid Niazmand, Omid Rouhi, Mohsen Asadnia, Amir Razmjou and Majid Ebrahimi Warkiani

Soft Matter, 2020, 16, 2448
DOI: 10.1039/C9SM02067E

Liquid metals: fundamentals and applications in chemistry

T. Daeneke, K. Khoshmanesh, N. Mahmood, I. A. de Castro, D. Esrafilzadeh, S. J. Barrow, M. D. Dickey and K. Kalantar-zadeh

Chem. Soc. Rev., 2018, 47, 4073
DOI: 10.1039/C7CS00043J

Highly stretchable, bionic self-healing waterborne polyurethane elastic film enabled by multiple hydrogen bonds for flexible strain sensors

Ending Zhang, Xiaohong Liu, Yingchun Liu, Jun Shi, Xiaobin Li, Xiaoyan Xiong, Changan Xu, Kun Wu and Mangeng Lu

J. Mater. Chem. A, 2021, 9, 23055
DOI: 10.1039/D1TA05148B

Liquid metal enabled microfluidics

Khashayar Khoshmanesh, Shi-Yang Tang, Jiu Yang Zhu, Samira Schaefer, Arnan Mitchell, Kourosh Kalantar-zadeh and Michael D. Dickey

Lab Chip, 2017, 17, 974
DOI: 10.1039/C7LC00046D

Small universal mechanical module driven by a liquid metal droplet

Rui Xue, Ye Tao, Haoxiu Sun, Weiyu Liu, Zhenyou Ge, Tianyi Jiang, Hongyuan Jiang, Fang Han, Yu Li and Yukun Ren

Lab Chip, 2021, 21, 2771
DOI: 10.1039/D1LC00206F

Gallium Liquid Metal: The Devil's Elixir

Shi-Yang Tang, Christopher Tabor, Kourosh Kalantar-Zadeh and Michael D. Dickey

Annu. Rev. Mater. Res., 2021, 51, 381
DOI: 10.1146/annurev-matsci-080819-125403

Customizable 3D-printed stirrers for investigation, optimization and scale-up processes of batch emulsion copolymerizations

Sven Bettermann, Robin Stuhr, Hans-Ulrich Moritz and Werner Pauer

Chemical Engineering Science, 2019, 206, 50
DOI: 10.1016/j.ces.2019.05.026

Pumping of Ionic Liquids by Liquid Metal‐Enabled Electrocapillary Flow under DC‐Biased AC Forcing

Rui Xue, Weiyu Liu, Tianyi Jiang, Chunlei Song, Hongyuan Jiang and Yukun Ren

Adv Materials Inter, 2020, 7
DOI: 10.1002/admi.202000345

Wearable Intracranial Pressure Monitoring Sensor for Infants

Baoyue Zhang, Ziyi Huang, Huixue Song, Hyun Soo Kim and Jaewon Park

Biosensors, 2021, 11, 213
DOI: 10.3390/bios11070213

Inertial Microfluidics with Integrated Vortex Generators Using Liquid Metal Droplets as Fugitive Ink

Ngan Nguyen, Peter Thurgood, Aram Arash, Elena Pirogova, Sara Baratchi and Khashayar Khoshmanesh

Adv Funct Materials, 2019, 29
DOI: 10.1002/adfm.201901998

Porous Membrane‐Enabled Fast Liquid Metal Patterning in Thin Blind‐Ended Microchannels

Ronghang Wang, Lin Gui, Lunjia Zhang, Zhizhu He, Meng Gao, Sen Chen, Xuyan Zhou, Yuntao Cui and Zhongshan Deng

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201900256

In situ interfacial engineering enabled mechanically adaptive and highly stretchable liquid metal conductor

Shuang-Man Xie, Xing Zhao, Li-Mei Peng, Peng Yu, Xiang-Jun Zha, Kai Ke, Rui-Ying Bao, Ming-Bo Yang and Wei Yang

Polymer, 2022, 240, 124482
DOI: 10.1016/j.polymer.2021.124482

Fluid-assisted one-step fabrication of fused deposition molding 3D printing parts with conductive networks and gradient functionalities

Yanling Zheng, Harini Bhuvaneswari Gunasekaran, Shuqiang Peng, Shuang Liu, Lixin Wu, Jianlei Wang and Xu Zhang

Polymer, 2023, 268, 125716
DOI: 10.1016/j.polymer.2023.125716

Microfluidic devices with gold thin film channels for chemical and biomedical applications: a review

Mahtab Ghasemi Toudeshkchoui, Navid Rabiee, Mohammad Rabiee, Mojtaba Bagherzadeh, Mohammadreza Tahriri, Lobat Tayebi and Michael R. Hamblin

Biomed Microdevices, 2019, 21
DOI: 10.1007/s10544-019-0439-0

Rapid Manufacturing via Selective Radio‐Frequency Heating and Curing of Thermosetting Resins

Anubhav Sarmah, Suchi K. Desai, Guler Bengusu Tezel, Aniruddh Vashisth, Mazin M. Mustafa, Kailash Arole, Ava G. Crowley and Micah J. Green

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202101351

Hybrid 3D printing of fluid-filled lattices for biomedical applications: a review

Maedeh Amirpour, Dayna Cracknell, Amirali Amirian and Arvin N. Alipour

Int J Adv Manuf Technol, 2025, 136, 4083
DOI: 10.1007/s00170-025-15079-9

A NOVEL METHOD FOR RAPID FABRICATION OF PMMA MICROFLUIDIC CHIP BY LASER CUTTING AND SEALING INTEGRATION

XUEYE CHEN, TIECHUAN LI and QI GAO

Surf. Rev. Lett., 2019, 26, 1950042
DOI: 10.1142/S0218625X19500422

A continuous polymerase chain reaction 3D spiral microreactor capable of facile and on-demand fabrication

Qiushuang Yang, Wenchao Zhou, Huan Li, Jialing Huang, Zeyuan Song, Long Cheng, Yihui Wu and Deqiang Mu

Analytica Chimica Acta, 2024, 1310, 342692
DOI: 10.1016/j.aca.2024.342692

Liquid Metal-Based Supramolecular Oleogel Lubricants Constructed by Dynamic Disulfide and Hydrogen Bonds for Antiwear and Friction Reduction

Tiantian Wang, Shenghua Xue, Baoluo He, Shujuan Liu, Qian Ye, Feng Zhou and Weimin Liu

Chem. Mater., 2024, 36, 5110
DOI: 10.1021/acs.chemmater.4c00325

From liquid metal to stretchable electronics: Overcoming the surface tension

Zixu Yang, Dan Yang, Xizheng Zhao, Qinyi Zhao, Ming Zhu, Yan Liu, Yu Wang, Weihong Lu and Dianpeng Qi

Sci. China Mater., 2022, 65, 2072
DOI: 10.1007/s40843-021-2023-x

Four Degrees‐of‐Freedom Direct Writing of Liquid Metal Patterns on Uneven Surfaces

Young Yoon, Shinmyoung Kim, Doyoon Kim, Sang Ken Kauh and Jungchul Lee

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800379

Patterned Liquid Metal Contacts for Printed Carbon Nanotube Transistors

Joseph B. Andrews, Kunal Mondal, Taylor V. Neumann, Jorge A. Cardenas, Justin Wang, Dishit P. Parekh, Yiliang Lin, Peter Ballentine, Michael D. Dickey and Aaron D. Franklin

ACS Nano, 2018, 12, 5482
DOI: 10.1021/acsnano.8b00909

Liquid–Solid Mixtures of Ga Metal Infused with Cu Microparticles and Nanoparticles for Microscale and Nanoscale Patterning of Solid Metals at Room Temperature

Dishit P. Parekh, Chris M. Fancher, Mohammed G. Mohammed, Taylor V. Neumann, Deepika Saini, Jonathon Guerrier, Collin Ladd, Elizabeth Hubbard, Jacob L. Jones and Michael D. Dickey

ACS Appl. Nano Mater., 2020, 3, 12064
DOI: 10.1021/acsanm.0c02566

Simple, low‐cost fabrication of semi‐circular channel using the surface tension of solder paste and its application to microfluidic valves

Sheng Yan, Yuxing Li, Yuanqing Zhu, Minsu Liu, Qianbin Zhao, Dan Yuan, Guolin Yun, Shiwu Zhang, Weijia Wen, Shi‐Yang Tang and Weihua Li

Electrophoresis, 2018, 39, 1460
DOI: 10.1002/elps.201800064

A practical guide to rapid-prototyping of PDMS-based microfluidic devices: A tutorial

Giorgio Gianini Morbioli, Nicholas Colby Speller and Amanda M. Stockton

Analytica Chimica Acta, 2020, 1135, 150
DOI: 10.1016/j.aca.2020.09.013

Multifunctional liquid metal polymer composites

Gregory G. Guymon and Mohammad H. Malakooti

Journal of Polymer Science, 2022, 60, 1300
DOI: 10.1002/pol.20210867

Sustainable Ketjenblack‐Based Carbon Ink for 3D Extrusion Micro‐Printing to Fabricate Flexible Supercapacitors

Christin Gellrich, Yannik Bräuniger, Ralf Schmidt, Julia Grothe and Stefan Kaskel

Batteries & Supercaps, 2024, 7
DOI: 10.1002/batt.202300469

Liquid metal–enabled cybernetic electronics

X. Sun, X. Wang, B. Yuan and J. Liu

Materials Today Physics, 2020, 14, 100245
DOI: 10.1016/j.mtphys.2020.100245

3D Printing by Multiphase Silicone/Water Capillary Inks

Sangchul Roh, Dishit P. Parekh, Bhuvnesh Bharti, Simeon D. Stoyanov and Orlin D. Velev

Advanced Materials, 2017, 29
DOI: 10.1002/adma.201701554

Low-Cost and Rapid-Production Microfluidic Electrochemical Double-Layer Capacitors for Fast and Sensitive Breast Cancer Diagnosis

Ricardo A. G. de Oliveira, Caroline Y. N. Nicoliche, Anielli M. Pasqualeti, Flavio M. Shimizu, Iris R. Ribeiro, Matias E. Melendez, André L. Carvalho, Angelo L. Gobbi, Ronaldo C. Faria and Renato S. Lima

Anal. Chem., 2018, 90, 12377
DOI: 10.1021/acs.analchem.8b02605

Multiscale Prototyping Approach via In-situ Switching Electrohydrodynamics for Flexible Microfluidic Design

Jiawen Xu, Haodong Hong, Zhenyu Wang, Xinhu Sun, Yen Wei and Yu Liu

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2024, 11, 353
DOI: 10.1007/s40684-023-00543-2

Effect of 3D-Printed Microvascular Network Design on the Self-Healing Behavior of Cross-Linked Polymers

G. Postiglione, M. Alberini, S. Leigh, M. Levi and S. Turri

ACS Appl. Mater. Interfaces, 2017, 9, 14371
DOI: 10.1021/acsami.7b01830

Fabrication of Microfluidic Chips Based on an EHD-Assisted Direct Printing Method

Xiang Chi, Xinyu Zhang, Zongan Li, Zhe Yuan, Liya Zhu, Feng Zhang and Jiquan Yang

Sensors, 2020, 20, 1559
DOI: 10.3390/s20061559

3D printing to enable multifunctionality in polymer-based composites: A review

D.G. Bekas, Y. Hou, Y. Liu and A. Panesar

Composites Part B: Engineering, 2019, 179, 107540
DOI: 10.1016/j.compositesb.2019.107540

Liquid Metal Direct Write and 3D Printing: A Review

Taylor V. Neumann and Michael D. Dickey

Adv Materials Technologies, 2020, 5
DOI: 10.1002/admt.202000070

Analysis and Transformations of Room‐Temperature Liquid Metal Interfaces – A Closer Look through Interfacial Tension

Stephan Handschuh‐Wang, Yuzhen Chen, Lifei Zhu and Xuechang Zhou

ChemPhysChem, 2018, 19, 1584
DOI: 10.1002/cphc.201800129

3D printing of highly reactive silicones using inkjet type droplet ejection and free space droplet merging and reaction

Monika Śliwiak, Robert Bui, Michael A. Brook and P. Ravi Selvaganapathy

Additive Manufacturing, 2021, 46, 102099
DOI: 10.1016/j.addma.2021.102099

Innovative catalyst integration on transparent silicone microreactors for photocatalytic applications

Ismael Pellejero, Alberto Clemente, Santiago Reinoso, Alfonso Cornejo, Alberto Navajas, José J. Vesperinas, Miguel A. Urbiztondo and Luis M. Gandía

Catalysis Today, 2022, 383, 164
DOI: 10.1016/j.cattod.2020.05.058

Controllable Flow and Manipulation of Liquid Metals

Yahua He, Jing You, Michael D. Dickey and Xiaolin Wang

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202309614

Fabrication of a Flexible Photodetector Based on a Liquid Eutectic Gallium Indium

Peng Xiao, Hyun-Jong Gwak and Soonmin Seo

Materials, 2020, 13, 5210
DOI: 10.3390/ma13225210

Are Contact Angle Measurements Useful for Oxide-Coated Liquid Metals?

Ishan D. Joshipura, K. Alex Persson, Vi Khanh Truong, Ji-Hyun Oh, Minsik Kong, Man Hou Vong, Chujun Ni, Mohanad Alsafatwi, Dishit P. Parekh, Hong Zhao and Michael D. Dickey

Langmuir, 2021, 37, 10914
DOI: 10.1021/acs.langmuir.1c01173

A rapid, maskless 3D prototyping for fabrication of capillary circuits: Toward urinary protein detection

Sheng Yan, Yuanqing Zhu, Shi‐Yang Tang, Yuxing Li, Qianbin Zhao, Dan Yuan, Guolin Yun, Jun Zhang, Shiwu Zhang and Weihua Li

Electrophoresis, 2018, 39, 957
DOI: 10.1002/elps.201700449

Consistent and Reproducible Direct Ink Writing of Eutectic Gallium–Indium for High-Quality Soft Sensors

Suin Kim, Jinhyeok Oh, Dahee Jeong, Wookeun Park and Joonbum Bae

Soft Robotics, 2018, 5, 601
DOI: 10.1089/soro.2017.0103

Stretchable, Skin-Attachable Electronics with Integrated Energy Storage Devices for Biosignal Monitoring

Yu Ra Jeong, Geumbee Lee, Heun Park and Jeong Sook Ha

Acc. Chem. Res., 2019, 52, 91
DOI: 10.1021/acs.accounts.8b00508

From Droplets to Devices: Recent Advances in Liquid Metal Droplet Enabled Electronics

Wedyan Babatain, Min Sung Kim and Muhammad Mustafa Hussain

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202308116

Dynamic control of reflective/diffusive optical surfaces on EGaIn liquid metal

Keisuke Nakakubo, Hiroaki Yoshioka, Kinichi Morita, Ryoichi Ishimatsu, Abolfazl Kiani, Hans Hallen, Michael D. Dickey and Yuji Oki

Opt. Mater. Express, 2021, 11, 2099
DOI: 10.1364/OME.425432

Facile fabrication of helical microfluidic channel based on rope coiling effect

Wei-min Yang, Tang-kui Zhu, Yu-an Jin and Jian-zhong Fu

Microsyst Technol, 2017, 23, 2957
DOI: 10.1007/s00542-016-3010-4

Ultrafast small-scale soft electromagnetic robots

Guoyong Mao, David Schiller, Doris Danninger, Bekele Hailegnaw, Florian Hartmann, Thomas Stockinger, Michael Drack, Nikita Arnold and Martin Kaltenbrunner

Nat Commun, 2022, 13
DOI: 10.1038/s41467-022-32123-4

Construction of liquid metal-based soft microfluidic sensors via soft lithography

Yang Zhang, Haowei Duan, Guoqiang Li, Maoyu Peng, Xing Ma, Ming Li and Sheng Yan

J Nanobiotechnol, 2022, 20
DOI: 10.1186/s12951-022-01471-0

Photoresist‐Assisted 3D Printing for Rapid Fabricating Circular Microchannel

Xiaoshi Han, Hui Chang, Yingze Wangguan, Chengji Song, Dongqing Li and Yongxin Song

Adv Materials Technologies, 2025, 10
DOI: 10.1002/admt.202500225

3D-printed liquid metal-based stretchable conductors and pressure sensors

Thassyo Pinto, Claudia Chen, Cody Pinger and Xiaobo Tan

Smart Mater. Struct., 2021, 30, 095005
DOI: 10.1088/1361-665X/ac15a1

A Soft Resistive Sensor with a Semicircular Cross-Sectional Channel for Soft Cardiac Catheter Ablation

Eric Rasmussen, Daniel Guo, Vybhav Murthy, Rachit Mishra, Cameron Riviere and Carmel Majidi

Sensors, 2021, 21, 4130
DOI: 10.3390/s21124130

Self‐Sealed Bionic Long Microchannels with Thin Walls and Designable Nanoholes Prepared by Line‐Contact Capillary‐Force Assembly

Zhao‐Xin Lao, Yan‐Lei Hu, Deng Pan, Ren‐Yan Wang, Chen‐Chu Zhang, Jin‐Cheng Ni, Bing Xu, Jia‐Wen Li, Dong Wu and Jia‐Ru Chu

Small, 2017, 13
DOI: 10.1002/smll.201603957

An easily fabricated three-dimensional threaded lemniscate-shaped micromixer for a wide range of flow rates

Mehdi Rafeie, Marcel Welleweerd, Amin Hassanzadeh-Barforoushi, Mohsen Asadnia, Wouter Olthuis and Majid Ebrahimi Warkiani

Biomicrofluidics, 2017, 11
DOI: 10.1063/1.4974904

Attributes, Fabrication, and Applications of Gallium‐Based Liquid Metal Particles

Yiliang Lin, Jan Genzer and Michael D. Dickey

Advanced Science, 2020, 7
DOI: 10.1002/advs.202000192

Direct Ink Writing of Materials for Electronics-Related Applications: A Mini Review

Zhenzhong Hou, Hai Lu, Ying Li, Laixia Yang and Yang Gao

Front. Mater., 2021, 8
DOI: 10.3389/fmats.2021.647229

Recent Advances in Analytical Chemistry by 3D Printing

Bethany Gross, Sarah Y. Lockwood and Dana M. Spence

Anal. Chem., 2017, 89, 57
DOI: 10.1021/acs.analchem.6b04344

EML webinar overview: Liquid metals at the extreme

Michael D. Dickey

Extreme Mechanics Letters, 2020, 40, 100863
DOI: 10.1016/j.eml.2020.100863

Design and Assembly of a Thin-Plate Mechatronic Atomizer by 3D Printing

Chin-Tai Chen and Hsin-Fang Hsu

Actuators, 2020, 9, 110
DOI: 10.3390/act9040110

Structural and functional applications of 3D-printed graphene-based architectures

Xiao You, Jinshan Yang and Shaoming Dong

J Mater Sci, 2021, 56, 9007
DOI: 10.1007/s10853-021-05899-x

Fabrication of Ionic Supramolecular Oleogel Lubricants Enhanced with Liquid Metal Nanodroplets for Superior Tribological Performance

Tiantian Wang, Yixin Wang, Xinnan Wang, Baoluo He, Shujuan Liu, Qian Ye, Feng Zhou and Weimin Liu

ACS Nano, 2024, 18, 33468
DOI: 10.1021/acsnano.4c10433

Nano-finishing of MEMS-based platforms for optimum optical sensing

Ankur Gupta, Poonam Sundriyal, Aviru Basu, Kapil Manoharan, Rishi Kant and Shantanu Bhattacharya

Journal of Micromanufacturing, 2020, 3, 39
DOI: 10.1177/2516598419862676

Applications and Techniques for Fast Machine Learning in Science

Allison McCarn Deiana, Nhan Tran, Joshua Agar, Michaela Blott, Giuseppe Di Guglielmo, Javier Duarte, Philip Harris, Scott Hauck, Mia Liu, Mark S. Neubauer, Jennifer Ngadiuba, Seda Ogrenci-Memik, Maurizio Pierini, Thea Aarrestad, Steffen Bähr, Jürgen Becker, Anne-Sophie Berthold, Richard J. Bonventre, Tomás E. Müller Bravo, Markus Diefenthaler, Zhen Dong, Nick Fritzsche, Amir Gholami, Ekaterina Govorkova, Dongning Guo, Kyle J. Hazelwood, Christian Herwig, Babar Khan, Sehoon Kim, Thomas Klijnsma, Yaling Liu, Kin Ho Lo, Tri Nguyen, Gianantonio Pezzullo, Seyedramin Rasoulinezhad, Ryan A. Rivera, Kate Scholberg, Justin Selig, Sougata Sen, Dmitri Strukov, William Tang, Savannah Thais, Kai Lukas Unger, Ricardo Vilalta, Belina von Krosigk, Shen Wang and Thomas K. Warburton

Front. Big Data, 2022, 5
DOI: 10.3389/fdata.2022.787421

Liquid–solid co-printing of multi-material 3D fluidic devices via material jetting

Brandon Hayes, Travis Hainsworth and Robert MacCurdy

Additive Manufacturing, 2022, 55, 102785
DOI: 10.1016/j.addma.2022.102785

A Versatile Approach for Direct Patterning of Liquid Metal Using Magnetic Field

Biao Ma, Chengtao Xu, Junjie Chi, Jian Chen, Chao Zhao and Hong Liu

Adv Funct Materials, 2019, 29
DOI: 10.1002/adfm.201901370

3D Printed Integrated Sensors: From Fabrication to Applications—A Review

Md Sahid Hassan, Saqlain Zaman, Joshua Z. R. Dantzler, Diana Hazel Leyva, Md Shahjahan Mahmud, Jean Montes Ramirez, Sofia Gabriela Gomez and Yirong Lin

Nanomaterials, 2023, 13, 3148
DOI: 10.3390/nano13243148

Multifunctional ultrastretchable and ultrasoft electronics enabled by uncrosslinked polysiloxane elastomers patterned with rheologically modified liquid metal electrodes: Beyond current soft and stretchable electronics

Priyanuj Bhuyan, Yuwen Wei, Dongkyun Cho, Umesh T. Nakate, Seoyeon Kim, Sangmin Lee, Minjae Choe, Hongchan Jeon and Sungjune Park

Chemical Engineering Journal, 2023, 453, 139832
DOI: 10.1016/j.cej.2022.139832

Functional Liquid Metal Polymeric Composites: Fundamentals and Applications in Soft Wearable Electronics

Fang‐Cheng Liang and Benjamin C. K. Tee

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202400284

Renewable Solid Electrodes in Microfluidics: Recovering the Electrochemical Activity without Treating the Surface

Carlos A. Teixeira, Gabriela F. Giordano, Maisa B. Beltrame, Luis C. S. Vieira, Angelo L. Gobbi and Renato S. Lima

Anal. Chem., 2016, 88, 11199
DOI: 10.1021/acs.analchem.6b03453

Fabrication of Thermally Stable Silver–Organic Complex (TS‐SOC) Based Conductible Filament Materials for 3D Printing

Tae Yun Kim, Sang Il Kim and Jong‐Jin Park

Adv Materials Technologies, 2017, 2
DOI: 10.1002/admt.201700079

Flexible three-dimensional integrated circuits (3D ICs) based on liquid metal

Ruiwen Tian, Jianhui Chen, Ming Zhu, Dianpeng Qi and Xiaodong Chen

Wearable Electronics, 2025, 2, 1
DOI: 10.1016/j.wees.2024.12.001

2D and 3D Structuring of Freestanding Metallic Wires Enabled by Room-Temperature Welding for Soft and Stretchable Electronics

Priyanuj Bhuyan, Vijay K. Singh and Sungjune Park

ACS Appl. Mater. Interfaces, 2021, 13, 36644
DOI: 10.1021/acsami.1c11577

In Situ Actuators with Gallium Liquid Metal Alloys and Polypyrrole-Coated Electrodes

Sagar Bhagwat, Andreas Goralczyk, Manuel Luitz, Lathif Sharieff, Sebastian Kluck, Ahmed Hamza, Niloofar Nekoonam, Frederik Kotz-Helmer, Pegah Pezeshkpour and Bastian E. Rapp

ACS Appl. Mater. Interfaces, 2023, 15, 10109
DOI: 10.1021/acsami.2c17906

Millimeter-scale lithium ion battery packaging for high-temperature sensing applications

Nirul Masurkar, Ganguli Babu, Sanjeev Porchelvan and Leela Mohana Reddy Arava

Journal of Power Sources, 2018, 399, 179
DOI: 10.1016/j.jpowsour.2018.07.077

Additive manufacturing and combustion performance of CL-20 composites

Wang Dunju, Guo Changping, Wang Ruihao, Zheng Baohui, Gao Bing and Nie Fude

J Mater Sci, 2020, 55, 2836
DOI: 10.1007/s10853-019-04209-w

Soft Multifunctional Composites and Emulsions with Liquid Metals

Navid Kazem, Tess Hellebrekers and Carmel Majidi

Advanced Materials, 2017, 29
DOI: 10.1002/adma.201605985

Fabrication of Multiple Parallel Microchannels in a Single Microgroove via the Heating Assisted MIMIC Technique

Dengying Zhang, Wenqiang Xing, Weiren Li, Shengming Liu, Yanli Dong, Lichun Zhang, Fengzhou Zhao, Jun Wang and Zheng Xu

Micromachines, 2022, 13, 364
DOI: 10.3390/mi13030364

Direct Writing and Repairable Paper Flexible Electronics Using Nickel–Liquid Metal Ink

Hao Chang, Rui Guo, Ziqiao Sun, Hongzhang Wang, Yi Hou, Qian Wang, Wei Rao and Jing Liu

Adv Materials Inter, 2018, 5
DOI: 10.1002/admi.201800571

Direct Writing of Microfluidic Footpaths by Pyro-EHD Printing

Sara Coppola, Giuseppe Nasti, Michele Todino, Federico Olivieri, Veronica Vespini and Pietro Ferraro

ACS Appl. Mater. Interfaces, 2017, 9, 16488
DOI: 10.1021/acsami.7b02633

Conversion of Polymer Surfaces into Nonwetting Substrates for Liquid Metal Applications

Sachin Babu, Behnoush Dousti, Gil Sik Lee and Jeong-Bong Lee

Langmuir, 2021, 37, 8139
DOI: 10.1021/acs.langmuir.1c00689

Electrowetting‐Assisted Selective Printing of Liquid Metal

Alexander M. Watson, Alexander B. Cook and Christopher E. Tabor

Adv Eng Mater, 2019, 21
DOI: 10.1002/adem.201900397

Fabrication of Hollow Polymer Microchannels Using the MIMIC Technique with Subsequent Heat Treatment

Weiren Li, Wenqiang Xing, Fengzhou Zhao, Lichun Zhang, Yupeng Huang, Jinxiu Li, Linwei Zhu, Zheng Xu and Dengying Zhang

Int. J. Precis. Eng. Manuf., 2021, 22, 1453
DOI: 10.1007/s12541-021-00553-7

3D printed embedded flexible circuits enabled by hydrogel-liquid metal filling synergy

Yanfei Liao, Yi Cao, Jiangkai Yuan, Guang Feng, Wei Xue, Fengping Li and Kunpeng Zhang

Microsyst Technol, 2025, 31, 2371
DOI: 10.1007/s00542-025-05860-x

Self-assembled electrically conductive biocompatible CNF wiring enables 3D-printed microfluidics applications

Michael Krause, Analise Marshall, Jeffrey K. Catterlin and Emil Kartalov

Sensors and Actuators A: Physical, 2025, 381, 116070
DOI: 10.1016/j.sna.2024.116070

Circuits and Antennas Incorporating Gallium-Based Liquid Metal

Yi-Wen Wu, Shaker Alkaraki, Shi-Yang Tang, Yi Wang and James R. Kelly

Proc. IEEE, 2023, 111, 955
DOI: 10.1109/JPROC.2023.3285400

Microfluidics by Additive Manufacturing for Wearable Biosensors: A Review

Mahshid Padash, Christian Enz and Sandro Carrara

Sensors, 2020, 20, 4236
DOI: 10.3390/s20154236

Aerosol Spray Deposition of Liquid Metal and Elastomer Coatings for Rapid Processing of Stretchable Electronics

Taylor Neumann, Berra Kara, Yasaman Sargolzaeiaval, Sooik Im, Jinwoo Ma, Jiayi Yang, Mehmet Ozturk and Michael Dickey

Micromachines, 2021, 12, 146
DOI: 10.3390/mi12020146

Printing, folding and assembly methods for forming 3D mesostructures in advanced materials

Yihui Zhang, Fan Zhang, Zheng Yan, Qiang Ma, Xiuling Li, Yonggang Huang and John A. Rogers

Nat Rev Mater, 2017, 2
DOI: 10.1038/natrevmats.2017.19

Hybrid 3D printed-paper microfluidics

Arthur Zargaryan, Nathalie Farhoudi, George Haworth, Julian F. Ashby and Sam H. Au

Sci Rep, 2020, 10
DOI: 10.1038/s41598-020-75489-5

Cross-Linkable Microgel Composite Matrix Bath for Embedded Bioprinting of Perfusable Tissue Constructs and Sculpting of Solid Objects

Ashley M. Compaan, Kaidong Song, Wenxuan Chai and Yong Huang

ACS Appl. Mater. Interfaces, 2020, 12, 7855
DOI: 10.1021/acsami.9b15451

Opportunities and limitations of metal additive manufacturing of structured catalytic converters

Fatemeh Mehdipour, Tim Delrieux, Florian Maurer, Jan-Dierk Grunwaldt, Christoph Klahn and Roland Dittmeyer

Catalysis Communications, 2024, 187, 106873
DOI: 10.1016/j.catcom.2024.106873

A study on the impact of liquid metal droplets onto metal and elastomer substrates

Zilu He, Rui Xiao and Shaoxing Qu

Acta Mech. Sin., 2025, 41
DOI: 10.1007/s10409-024-24165-x

3D Micropatterned All‐Flexible Microfluidic Platform for Microwave‐Assisted Flow Organic Synthesis

Deniz Hur, Mehmet G. Say, Sibel E. Diltemiz, Fatma Duman, Arzu Ersöz and Rıdvan Say

ChemPlusChem, 2018, 83, 42
DOI: 10.1002/cplu.201700440

Magnetic Actuation Methods in Bio/Soft Robotics

Nafiseh Ebrahimi, Chenghao Bi, David J. Cappelleri, Gastone Ciuti, Andrew T. Conn, Damien Faivre, Neda Habibi, Alexander Hošovský, Veronica Iacovacci, Islam S. M. Khalil, Veronika Magdanz, Sarthak Misra, Chytra Pawashe, Rasoul Rashidifar, Paul Eduardo David Soto‐Rodriguez, Zoltan Fekete and Amir Jafari

Adv Funct Materials, 2021, 31
DOI: 10.1002/adfm.202005137

Functionalization-Free Microfluidic Electronic Tongue Based on a Single Response

Flavio M. Shimizu, Fagner R. Todão, Angelo L. Gobbi, Osvaldo N. Oliveira, Carlos D. Garcia and Renato S. Lima

ACS Sens., 2017, 2, 1027
DOI: 10.1021/acssensors.7b00302

Auxiliary electrode oxidation for naked-eye electrochemical determinations in microfluidics: Towards on-the-spot applications

Diego H. Martucci, Fagner R. Todão, Flávio M. Shimizu, Tiago M. Fukudome, Stephane de F. Schwarz, Emanuel Carrilho, Angelo L. Gobbi, Osvaldo N. Oliveira and Renato S. Lima

Electrochimica Acta, 2018, 292, 125
DOI: 10.1016/j.electacta.2018.08.133

Surface Modification of Gallium‐Based Liquid Metals: Mechanisms and Applications in Biomedical Sensors and Soft Actuators

Ki Yoon Kwon, Vi Khanh Truong, Febby Krisnadi, Sooik Im, Jinwoo Ma, Nazgol Mehrabian, Tae-il Kim and Michael D. Dickey

Advanced Intelligent Systems, 2021, 3
DOI: 10.1002/aisy.202000159

Ubiquitous Liquid Metal 3D Printing: From Gas, Liquid to Rigid Media

Xiaohui Shan, Weichen Feng, Ziliang Cui, Minghui Guo, Hongshi Huang, Jian Wang, Xiyu Zhu, Ruizhi Yuan, Yingjie Cao, Bo Wang, Huiyu Qiao, Xuelin Wang and Jing Liu

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202421571

“Do-it-in-classroom” fabrication of microfluidic systems by replica moulding of pasta structures

Ngan Nguyen, Peter Thurgood, Jiu Yang Zhu, Elena Pirogova, Sara Baratchi and Khashayar Khoshmanesh

Biomicrofluidics, 2018, 12
DOI: 10.1063/1.5042684

Freeze‐Printing of Liquid Metal Alloys for Manufacturing of 3D, Conductive, and Flexible Networks

Abhishek Gannarapu and Bulent Arda Gozen

Adv Materials Technologies, 2016, 1
DOI: 10.1002/admt.201600047

Flexible and Stretchable Liquid Metal Electrodes Working at Sub-Zero Temperature and Their Applications

Peng Xiao, Ju-Hyung Kim and Soonmin Seo

Materials, 2021, 14, 4313
DOI: 10.3390/ma14154313

Advanced Material Strategies for Next-Generation Additive Manufacturing

Jinke Chang, Jiankang He, Mao Mao, Wenxing Zhou, Qi Lei, Xiao Li, Dichen Li, Chee-Kai Chua and Xin Zhao

Materials, 2018, 11, 166
DOI: 10.3390/ma11010166

3D Printing Sulfur Copolymer‐Graphene Architectures for Li‐S Batteries

Kai Shen, Hailong Mei, Bin Li, Junwei Ding and Shubin Yang

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201701527

Liquid metal-based triboelectric nanogenerators for energy harvesting and emerging applications

Bei Xu, Weiqing Peng, Juanxia He, Ye Zhang, Xuling Song, Jianfeng Li, Zhijun Zhang, Yi Luo, Xiangjiang Meng, Chenchen Cai, Yanhua Liu, Zhiting Wei, Shuangfei Wang, Shuangxi Nie and Qingshan Duan

Nano Energy, 2024, 120, 109107
DOI: 10.1016/j.nanoen.2023.109107

Fabrication of truly 3D microfluidic channel using 3D-printed soluble mold

Kyunghun Kang, Sangwoo Oh, Hak Yi, Seungoh Han and Yongha Hwang

Biomicrofluidics, 2018, 12
DOI: 10.1063/1.5012548

3D Printed Graphene Based Energy Storage Devices

Christopher W. Foster, Michael P. Down, Yan Zhang, Xiaobo Ji, Samuel J. Rowley-Neale, Graham C. Smith, Peter J. Kelly and Craig E. Banks

Sci Rep, 2017, 7
DOI: 10.1038/srep42233

Rheological Modification of Liquid Metal for Additive Manufacturing of Stretchable Electronics

Uranbileg Daalkhaijav, Osman Dogan Yirmibesoglu, Stephanie Walker and Yigit Mengüç

Adv Materials Technologies, 2018, 3
DOI: 10.1002/admt.201700351

Bionic microchannels for step lifting transpiration

Zhaolong Wang, Qiu Yin, Ziheng Zhan, Wenhao Li, Mingzhu Xie, Huigao Duan, Ping Cheng, Ce Zhang, Yongping Chen and Zhichao Dong

Int. J. Extrem. Manuf., 2023, 5, 025502
DOI: 10.1088/2631-7990/acbcff

Shapeable Material Technologies for 3D Self‐Assembly of Mesoscale Electronics

Daniil Karnaushenko, Tong Kang and Oliver G. Schmidt

Adv Materials Technologies, 2019, 4
DOI: 10.1002/admt.201800692

Direct ink writing of silicone elastomers to fabricate microfluidic devices and soft robots

Kento Yamagishi, Rahul Karyappa, Terry Ching and Michinao Hashimoto

MRS Communications, 2024, 14, 846
DOI: 10.1557/s43579-024-00631-7

Pumping of electrolyte with mobile liquid metal droplets driven by continuous electrowetting: A full‐scaled simulation study considering surface‐coupled electrocapillary two‐phase flow

Weiyu Liu, Ye Tao, Zhenyou Ge, Jian Zhou, Ruibo Xu and Yukun Ren

Electrophoresis, 2021, 42, 950
DOI: 10.1002/elps.202000237

Hybrid Printing of Fully Integrated Microfluidic Devices for Biosensing

Yipu Du, Julius Reitemeier, Qiang Jiang, Md Omarsany Bappy, Paul W. Bohn and Yanliang Zhang

Small, 2024, 20
DOI: 10.1002/smll.202304966

Shaping a Soft Future: Patterning Liquid Metals

Jinwoo Ma, Febby Krisnadi, Man Hou Vong, Minsik Kong, Omar M. Awartani and Michael D. Dickey

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202205196

Implementation of hybrid PDMS-graphite/Ag conductive material for flexible electronic devices and microfluidic applications

Yanfang Guan, Fengqian Xu, Xiaoliang Wang, Yanbo Hui, Jie Sha, Yong Tian, Zhongying Wang, Shixiong Zhang, Dali Chen and Liyan Yang

Microelectronic Engineering, 2021, 235, 111455
DOI: 10.1016/j.mee.2020.111455

Gallium-based liquid metals as smart responsive materials: Morphological forms and stimuli characterization

Rahul Agarwal and Abdulmajeed Mohamad

Advances in Colloid and Interface Science, 2024, 329, 103183
DOI: 10.1016/j.cis.2024.103183

3D-Printed Liquid Metal Interconnects for Stretchable Electronics

Callen Votzke, Uranbileg Daalkhaijav, Yigit Menguc and Matthew L. Johnston

IEEE Sensors J., 2019, 19, 3832
DOI: 10.1109/JSEN.2019.2894405

Three-Dimensional Fabrication for Microfluidics by Conventional Techniques and Equipment Used in Mass Production

Toyohiro Naito, Makoto Nakamura, Noritada Kaji, Takuya Kubo, Yoshinobu Baba and Koji Otsuka

Micromachines, 2016, 7, 82
DOI: 10.3390/mi7050082

A review of liquid metal-based flexible electronics achieved by ultrafast lasers

Jingzhou Zhang, Qing Yang, Chengjun Zhang, Haoyu Li, Hualong Zhao and Feng Chen

Applied Materials Today, 2024, 41, 102505
DOI: 10.1016/j.apmt.2024.102505

Smart Eutectic Gallium–Indium: From Properties to Applications

Zhibin Zhao, Saurabh Soni, Takhee Lee, Christian A. Nijhuis and Dong Xiang

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202203391

Microfluidic Capillaric Circuit for Rapid and Facile Bacteria Detection

Ayokunle Oluwafemi Olanrewaju, Andy Ng, Philippe DeCorwin-Martin, Alessandra Robillard and David Juncker

Anal. Chem., 2017, 89, 6846
DOI: 10.1021/acs.analchem.7b01315

Creating Stiff, Tough, and Functional Hydrogel Composites with Low‐Melting‐Point Alloys

Riku Takahashi, Tao Lin Sun, Yoshiyuki Saruwatari, Takayuki Kurokawa, Daniel R. King and Jian Ping Gong

Advanced Materials, 2018, 30
DOI: 10.1002/adma.201706885

Gallium-Based Room-Temperature Liquid Metals: Actuation and Manipulation of Droplets and Flows

Leily Majidi, Dmitry Gritsenko and Jie Xu

Front. Mech. Eng., 2017, 3
DOI: 10.3389/fmech.2017.00009

Liquid Metal‐Polymer Microlattice Metamaterials with High Fracture Toughness and Damage Recoverability

Wenqiang Zhang, Juzheng Chen, Xiang Li and Yang Lu

Small, 2020, 16
DOI: 10.1002/smll.202004190

Pervasive liquid metal printed electronics: From concept incubation to industry

Sen Chen and Jing Liu

iScience, 2021, 24, 102026
DOI: 10.1016/j.isci.2020.102026

Electro-Osmotic Gripper Characterization for Layered Assembly

Cheryl Perich, Robert MacCurdy, Ashley Macner, Joni Mici, Paul Steen and Hod Lipson

3D Printing and Additive Manufacturing, 2022, 9, 337
DOI: 10.1089/3dp.2020.0224

A free-standing, phase-change liquid metal mold for 3D flexible microfluidics

Sheng Yan, Qingwei Yuan, Jialin Wu and Zixuan Jia

Front. Bioeng. Biotechnol., 2022, 10
DOI: 10.3389/fbioe.2022.1094294

Matrix-Assisted Three-Dimensional Printing of Cellulose Nanofibers for Paper Microfluidics

Sungchul Shin and Jinho Hyun

ACS Appl. Mater. Interfaces, 2017, 9, 26438
DOI: 10.1021/acsami.7b07609

Deformable liquid metal polymer composites with tunable electronic and mechanical properties

Amanda Koh, Jennifer Sietins, Geoffrey Slipher and Randy Mrozek

J. Mater. Res., 2018, 33, 2443
DOI: 10.1557/jmr.2018.209

3-D/4-D-Printed Reconfigurable Metasurfaces for Controlling Electromagnetic Waves

Eiyong Park, Minjae Lee, Heijun Jeong, Ratanak Phon, Kyounghwan Kim, Seyeon Park and Sungjoon Lim

Proc. IEEE, 2024, 112, 1000
DOI: 10.1109/JPROC.2024.3391232

Liquid Metal Patterning and Unique Properties for Next‐Generation Soft Electronics

Minwoo Kim, Hyungjun Lim and Seung Hwan Ko

Advanced Science, 2023, 10
DOI: 10.1002/advs.202205795

Direct ink writing of flexible electronic circuits and their characterization

Muhammad Abas, Qazi Salman, Aqib Mashood Khan and Khalid Rahman

J Braz. Soc. Mech. Sci. Eng., 2019, 41
DOI: 10.1007/s40430-019-2066-3

Three-Dimensional Coprinting of Liquid Metals for Directly Fabricating Stretchable Electronics

Yong He, Luyu Zhou, Junfu Zhan, Qing Gao, Jianzhong Fu, Chaoqi Xie, Haiming Zhao and Yu Liu

3D Printing and Additive Manufacturing, 2018, 5, 195
DOI: 10.1089/3dp.2017.0147

High‐Temperature Copper–Graphene Conductors via Aerosol Jetting

Jian Yu, Saurabh Khuje, Aaron Sheng, Steven Kilczewski, Thomas Parker and Shenqiang Ren

Adv Eng Mater, 2022, 24
DOI: 10.1002/adem.202200284

Microfluidic Channels Fabrication Based on Underwater Superpolymphobic Microgrooves Produced by Femtosecond Laser Direct Writing

Jiale Yong, Zhibing Zhan, Subhash C. Singh, Feng Chen and Chunlei Guo

ACS Appl. Polym. Mater., 2019, 1, 2819
DOI: 10.1021/acsapm.9b00269

Functional Metallic Microcomponents via Liquid-Phase Multiphoton Direct Laser Writing: A Review

Erik Hagen Waller, Stefan Dix, Jonas Gutsche, Artur Widera and Georg von Freymann

Micromachines, 2019, 10, 827
DOI: 10.3390/mi10120827

Rheological properties of cellulose nanofiber hydrogel for high-fidelity 3D printing

Sungchul Shin and Jinho Hyun

Carbohydrate Polymers, 2021, 263, 117976
DOI: 10.1016/j.carbpol.2021.117976

The recent development and applications of fluidic channels by 3D printing

Yufeng Zhou

J Biomed Sci, 2017, 24
DOI: 10.1186/s12929-017-0384-2

Continuous emulsion copolymerization processes at mild conditions in a 3D-printed tubular bended reactor

Sven Bettermann, Baldur Schroeter, Hans-Ulrich Moritz, Werner Pauer, Marcel Fassbender and Gerrit A. Luinstra

Chemical Engineering Journal, 2018, 338, 311
DOI: 10.1016/j.cej.2018.01.038

Microfluidic 3D Helix Mixers

Georgette Salieb-Beugelaar, Daniel Gonçalves, Marc Wolf and Patrick Hunziker

Micromachines, 2016, 7, 189
DOI: 10.3390/mi7100189

Microfluidic models of the human circulatory system: versatile platforms for exploring mechanobiology and disease modeling

Ngan Nguyen, Peter Thurgood, Nadia Chandra Sekar, Sheng Chen, Elena Pirogova, Karlheinz Peter, Sara Baratchi and Khashayar Khoshmanesh

Biophys Rev, 2021, 13, 769
DOI: 10.1007/s12551-021-00815-8

Rapid fabrication of rounded microchannels via extrusion printing of molds using a thixotropic ink

Jiyao Xing, Weibin Rong, Ding Sun, Lefeng Wang and Lining Sun

Sensors and Actuators B: Chemical, 2017, 248, 613
DOI: 10.1016/j.snb.2017.03.111

3D Printing Quasi‐Solid‐State Asymmetric Micro‐Supercapacitors with Ultrahigh Areal Energy Density

Kai Shen, Junwei Ding and Shubin Yang

Advanced Energy Materials, 2018, 8
DOI: 10.1002/aenm.201800408

Nonlinear Phenomena in Microfluidics

Sarah Battat, David A. Weitz and George M. Whitesides

Chem. Rev., 2022, 122, 6921
DOI: 10.1021/acs.chemrev.1c00985

Liquid metals in plastics for super-toughness and high-performance force sensors

Yang Lou, Huaizhi Liu and Jiuyang Zhang

Chemical Engineering Journal, 2020, 399, 125732
DOI: 10.1016/j.cej.2020.125732

Fabrication of microfluidic channels with various cross-sectional shapes using anisotropic etching of Si and self-alignment

Dong-Ki Lee, Joo Yong Kwon and Young Hak Cho

Appl. Phys. A, 2019, 125
DOI: 10.1007/s00339-019-2600-2

Temperature‐Stress Bimodal Sensing Conductive Hydrogel‐Liquid Metal by Facile Synthesis for Smart Wearable Sensor

Chen Wang, Jie Li, Zhaozhou Fang, Zhirui Hu, Xiaotong Wei, Yang Cao, Jing Han and Yingchun Li

Macromol. Rapid Commun., 2022, 43
DOI: 10.1002/marc.202100543

Additive manufacturing of nanotube-loaded thermosets via direct ink writing and radio-frequency heating and curing

Anubhav Sarmah, Suchi K. Desai, Ava G. Crowley, Gabriel C. Zolton, Guler Bengusu Tezel, Ethan M. Harkin, Thang Q. Tran, Kailash Arole and Micah J. Green

Carbon, 2022, 200, 307
DOI: 10.1016/j.carbon.2022.08.063

Multifunctional Ternary Hybrid Hydrogel Sensor Prepared via the Synergistic Stabilization Effect

Ruixin Tang, Qingyu Meng, Zhaosong Wang, Chengjiang Lu, Minghao Zhang, Caicai Li, Yingying Li, Xiaoping Shen and Qingfeng Sun

ACS Appl. Mater. Interfaces, 2021, 13, 57725
DOI: 10.1021/acsami.1c17895

Fabrication of 3D Microfluidic Channels and In‐Channel Features Using 3D Printed, Water‐Soluble Sacrificial Mold

Wei Huang Goh and Michinao Hashimoto

Macro Materials & Eng, 2018, 303
DOI: 10.1002/mame.201700484

Mold Embossing-Based Soft Lithography for Fabrication of Complex Non-rectangular Channels

Song Gao, Tonghuan Zhan, Wei Zhou, Fuzhou Niu, Shuqiang Min, Aijun Xiao and Bing Xu

ACS Appl. Mater. Interfaces, 2023, 15, 31755
DOI: 10.1021/acsami.3c01306

Liquid Metal–Based Soft Microfluidics

Lifei Zhu, Ben Wang, Stephan Handschuh‐Wang and Xuechang Zhou

Small, 2020, 16
DOI: 10.1002/smll.201903841

Flexible thermoelectric generator using bulk legs and liquid metal interconnects for wearable electronics

Francisco Suarez, Dishit P. Parekh, Collin Ladd, Daryoosh Vashaee, Michael D. Dickey and Mehmet C. Öztürk

Applied Energy, 2017, 202, 736
DOI: 10.1016/j.apenergy.2017.05.181

Fabrication Approaches to Interconnect Based Devices for Stretchable Electronics: A Review

Steven Nagels and Wim Deferme

Materials, 2018, 11, 375
DOI: 10.3390/ma11030375

Inkjet printed polyethylene glycol as a fugitive ink for the fabrication of flexible microfluidic systems

Ahmed Alfadhel, Jing Ouyang, Chaitanya G. Mahajan, Farzad Forouzandeh, Denis Cormier and David A. Borkholder

Materials & Design, 2018, 150, 182
DOI: 10.1016/j.matdes.2018.04.013

3D microfluidics in PDMS: manufacturing with 3D molding

Tyler Richmond and Nathan Tompkins

Microfluid Nanofluid, 2021, 25
DOI: 10.1007/s10404-021-02478-z

Self-Healing Flexible Conductive Film by Repairing Defects via Flowable Liquid Metal Droplets

Ruiwen Niu, Mingliang Jin, Jieping Cao, Zhibin Yan, Jinwei Gao, Hao Wu, Guofu Zhou and Lingling Shui

Micromachines, 2019, 10, 113
DOI: 10.3390/mi10020113

A Controllable Untethered Vehicle Driven by Electrically Actuated Liquid Metal Droplets

Xiangxiang Li, Jie Xie, Shi-Yang Tang, Ronald Xu, Xiangpeng Li, Weihua Li and Shiwu Zhang

IEEE Trans. Ind. Inf., 2019, 15, 2535
DOI: 10.1109/TII.2018.2870857

Interfacing 3D micro/nanochannels with a branch-shaped reservoir enhances fluid and mass transport

Prasoon Kumar, Prasanna S Gandhi and Mainak Majumder

J. Micromech. Microeng., 2017, 27, 015026
DOI: 10.1088/1361-6439/27/1/015026

Mechanochromic Stretchable Electronics

Meredith H. Barbee, Kunal Mondal, John Z. Deng, Vivek Bharambe, Taylor V. Neumann, Jacob J. Adams, Nicholas Boechler, Michael D. Dickey and Stephen L. Craig

ACS Appl. Mater. Interfaces, 2018, 10, 29918
DOI: 10.1021/acsami.8b09130

Flexible-to-Stretchable Mechanical and Electrical Interconnects

Steven Erlenbach, Kunal Mondal, Jinwoo Ma, Taylor V. Neumann, Siyuan Ma, James D. Holbery and Michael D. Dickey

ACS Appl. Mater. Interfaces, 2023, 15, 6005
DOI: 10.1021/acsami.2c14260

Liquid-Metal-Mediated Recrystallization of Zinc Under Ambient Conditions

J. E. Norkett and V. M. Miller

JOM, 2020, 72, 860
DOI: 10.1007/s11837-019-03954-2