Issue 9, 2018

Insight into the ADOR zeolite-to-zeolite transformation: the UOV case

Abstract

IPC-12 zeolite is the first member of the ADOR family produced by the structural transformation of UOV. The details of the UOV rearrangement were studied to determine the influence of the properties of the parent zeolite and treatment conditions on the outcome of IPC-12 formation. It was established that incomplete disassembly of UOV can be caused by insufficient lability of interlayer connectivity in the parent material possessing Si-enriched D4Rs or by inhibition of hydrolysis by diluted acid at high temperature. The impacts of specific interactions of the framework with anions on controllable breaking of interlayer connectivity and the conditions of the treatment at low pH (<−1) on the characteristics of the produced IPC-12 were found to be negligible. The concentration of the acid significantly influences the extent and even the direction of UOV transformation. Layer disassembly is inhibited in 1–4 M acid solutions, and complete hydrolysis to a layered precursor can be achieved in 0.1 M solution, while application of 12 M solution led to direct formation of IPC-12. Layer reassembly followed using in situ XRD measurement with a synchrotron source was found to be a gradual process starting at 40 °C and completing at 200–220 °C.

Graphical abstract: Insight into the ADOR zeolite-to-zeolite transformation: the UOV case

Supplementary files

Article information

Article type
Paper
Submitted
06 Okt 2017
Accepted
05 Dez 2017
First published
06 Dez 2017

Dalton Trans., 2018,47, 3084-3092

Insight into the ADOR zeolite-to-zeolite transformation: the UOV case

V. Kasneryk, M. Shamzhy, M. Opanasenko, P. S. Wheatley, R. E. Morris and J. Čejka, Dalton Trans., 2018, 47, 3084 DOI: 10.1039/C7DT03751A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements