Issue 2, 2023

Upcycling of textile waste into high added value cellulose porous materials, aerogels and cryogels

Abstract

Cellulose textile waste was upcycled into highly porous and lightweight cellulose materials. Fabrics made of cotton and regenerated cellulose were dissolved in ionic liquids, 1-ethyl-3-methyl imidazolium acetate ([EMIM][OAc]) or 1,5-diazabicyclo[4.3.0]non-5-enium acetate ([DBNH][OAc]), each mixed with dimethyl sulfoxide (DMSO). Non-solvent induced phase separation triggered by ethanol was used to obtain alcogels, which were dried either with supercritical CO2, or ethanol was exchanged with water and hydrogels were freeze-dried. Alcogels were also atmospheric pressure dried for comparison. Microcrystalline cellulose was used as a reference and processed in the same way. Materials with various porosities and morphologies were obtained. The influence of the cellulose molecular weight, the type of solvent and the drying route on materials' density, porosity, specific surface area and morphology was investigated. The importance of the coagulation pathway, or the way of demixing (instantaneous or delayed), is demonstrated as it allows us to significantly vary the material morphology.

Graphical abstract: Upcycling of textile waste into high added value cellulose porous materials, aerogels and cryogels

Supplementary files

Article information

Article type
Paper
Submitted
28 Okt 2022
Accepted
10 Jan 2023
First published
16 Jan 2023
This article is Open Access
Creative Commons BY-NC license

RSC Sustain., 2023,1, 335-345

Upcycling of textile waste into high added value cellulose porous materials, aerogels and cryogels

M. Négrier, E. El Ahmar, R. Sescousse, M. Sauceau and T. Budtova, RSC Sustain., 2023, 1, 335 DOI: 10.1039/D2SU00084A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements