Issue 6, 2022

Designing a novel Eu2+-doped hafnium-silicate phosphor for an energy-down-shift layer of CsPbI3 solar cells

Abstract

The excessive carbon discharge and low utilization efficiency of solar energy are still the biggest challenges in the world. A series of Eu2+ doped K2HfSiO5 phosphors were synthesized and applied in CsPbI3 perovskite solar cells. Under the excitation of ultraviolet and near ultraviolet light in the range of 300–450 nm, K2HfSiO5:Eu2+ exhibits emission in the visible range of 450–650 nm. Due to their strong absorption in the ultraviolet region and high quantum efficiency, K2HfSiO5:Eu2+ phosphors could be used to fabricate an energy-down-shift layer for solar cells. When spin-coated with the layer, the value of the short-circuit current of the packaged CsPbI3 solar cell increased, resulting in the enhancement of the power conversion efficiency by 2.19%. In addition, other basic properties of K2HfSiO5:Eu2+ phosphors such as photoluminescence, cathodoluminescence and stability have also been studied. All the results indicate that the energy-down-shift layer made using K2HfSiO5:Eu2+ phosphors has a positive effect on improving the performance of CsPbI3 perovskite solar cells.

Graphical abstract: Designing a novel Eu2+-doped hafnium-silicate phosphor for an energy-down-shift layer of CsPbI3 solar cells

Article information

Article type
Research Article
Submitted
25 Dez 2021
Accepted
19 Jan 2022
First published
21 Jan 2022

Mater. Chem. Front., 2022,6, 724-736

Designing a novel Eu2+-doped hafnium-silicate phosphor for an energy-down-shift layer of CsPbI3 solar cells

Y. Li, S. Wang and Y. Wang, Mater. Chem. Front., 2022, 6, 724 DOI: 10.1039/D1QM01655E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements