Issue 47, 2021

Triple-cation perovskite solar cells fabricated by a hybrid PVD/blade coating process using green solvents

Abstract

The scalability of highly efficient organic–inorganic perovskite solar cells (PSCs) is one of the major challenges of solar module manufacturing. Various scalable methods have been explored to strive for uniform perovskite films of high crystal quality on large-area substrates, but each of these methods has individual limitations on the potential of successful commercialization of perovskite photovoltaics. Here, we report a fully scalable hybrid process, which combines vapor- and solution-based techniques to deposit high quality uniform perovskite films on large-area substrates. This two-step process does not use toxic solvents, and it further allows easy implementation of passivation strategies and additives. We fabricate PSCs based on this process and use blade coating to deposit a SnO2 electron transporting layer and Spiro-OMeTAD hole transporting layer without halogenated solvents in ambient air. The fabricated PSCs have achieved open-circuit voltage up to 1.16 V and power conversion efficiency of 18.7% with good uniformity on 5 cm × 5 cm substrates.

Graphical abstract: Triple-cation perovskite solar cells fabricated by a hybrid PVD/blade coating process using green solvents

Supplementary files

Article information

Article type
Paper
Submitted
03 Sep 2021
Accepted
18 Okt 2021
First published
18 Okt 2021
This article is Open Access
Creative Commons BY-NC license

J. Mater. Chem. A, 2021,9, 26680-26687

Triple-cation perovskite solar cells fabricated by a hybrid PVD/blade coating process using green solvents

S. Siegrist, S. Yang, E. Gilshtein, X. Sun, A. N. Tiwari and F. Fu, J. Mater. Chem. A, 2021, 9, 26680 DOI: 10.1039/D1TA07579A

This article is licensed under a Creative Commons Attribution-NonCommercial 3.0 Unported Licence. You can use material from this article in other publications, without requesting further permission from the RSC, provided that the correct acknowledgement is given and it is not used for commercial purposes.

To request permission to reproduce material from this article in a commercial publication, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party commercial publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements