Issue 47, 2018

An alpha-fetoprotein electrochemical immunosensor based on a carbon/gold bi-nanoparticle platform

Abstract

We report an electrochemical immunosensor for alpha-fetoprotein (AFP) using an immobilisation layer of carbon and gold bi-nanoparticles. The carbon nanoparticles (CNPs) were prepared from candle soot while the gold nanoparticles (AuNPs) were electrochemically deposited. The immunosensor was prepared by the immobilisation of a probe anti-AFP (antibody) on a CNP/AuNP nanocomposite modified electrode for 40 min at 35 °C and subsequently blocked by bovine serum albumin (BSA). Cyclic voltammetry and electrochemical impedance spectroscopy (EIS) were used to investigate the immunosensor at each stage of preparation. The immunosensor was responsive to AFP over a concentration range of 0.005 to 1000 ng mL−1, with detection limits of 0.0019 ng mL−1 (square wave voltammetry) and 0.00175 ng mL−1 (EIS). The immunosensor exhibited good stability over a period of fourteen days when stored at 4 °C, and was selective in the presence of some interferents such as glucose, carcinoembryonic antigen, prostate-specific antigen, human immunoglobulin, etc. The presence of the bi-nanoparticles enhanced the immunosensor performance.

Graphical abstract: An alpha-fetoprotein electrochemical immunosensor based on a carbon/gold bi-nanoparticle platform

Supplementary files

Article information

Article type
Paper
Submitted
29 Okt 2018
Accepted
06 Nov 2018
First published
09 Nov 2018

Anal. Methods, 2018,10, 5649-5658

An alpha-fetoprotein electrochemical immunosensor based on a carbon/gold bi-nanoparticle platform

A. O. Idris, N. Mabuba and O. A. Arotiba, Anal. Methods, 2018, 10, 5649 DOI: 10.1039/C8AY02360C

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements