Morphological insights into Se-driven charge transport and enhanced performance in Sb2(S,Se)3 solar cells

Yeeun Lee, Hongjae Shim, Mingrui He, Kaiwen Sun, Mohammad Moein Seyfouri, Lei Wang, Jan Seidel, Chen Qian, Xiaojing Hao and Jae Sung Yun

J. Mater. Chem. A, 2025
DOI: 10.1039/D5TA05469A

Interfacial defect healing of In2S3/Sb2(S,Se)3 heterojunction solar cells with a novel wide-bandgap InOCl passivator

Changxue Wang, Dongdong Li, Xiaoli Mao, Lei Wan, Zhen Cheng, Jun Zhu, Robert L. Z. Hoye and Ru Zhou

J. Mater. Chem. A, 2023, 11, 19914
DOI: 10.1039/D3TA01736B

Amorphous indium–zinc oxide layer with transport and protective dual-function for high-efficiency semitransparent and tandem Sb2(S,Se)3 solar cells

Junjie Yang, Jianyu Li, Yuehao Gu, Rongfeng Tang, Lei Huang, Zhiyuan Cai, Bo Che, Qi Zhao, Shuwei Sheng, Hong Wang, Changfei Zhu and Tao Chen

Energy Environ. Sci., 2025, 18, 4833
DOI: 10.1039/D4EE04699D

Enhancement in the efficiency of Sb2(S,Se)3 thin-film solar cells with spin-coating NiOx as the hole transport layer

Shan Huang, Yelei Xing, Honcheng Zhu, Tingyu Zhang, Kangjun Geng, Yusheng Yang, Han Zhang, QingYan Gu, Jianhua Qiu, Sai Jiang, Huafei Guo, Ningyi Yuan and Jianning Ding

J. Mater. Chem. C, 2024, 12, 3098
DOI: 10.1039/D3TC03734G

Effect of Annealed and Non‐Annealed Inorganic MnS Hole‐Transport Layer for Efficient Sb2(S,Se)3 Solar Cells: A Theoretical Justification

Karthick Sekar and Sasikumar Mayarambakam

Physica Status Solidi (b), 2023, 260
DOI: 10.1002/pssb.202300087

Band offset engineering in antimony sulfide (Sb2S3) solar cells, using SCAPS simulation: A route toward PCE > 10%

Swapnil Barthwal, Ramashanker Gupta, Amit Kumar, K. Ramesh, Sandeep Pathak and Supravat Karak

Optik, 2023, 282, 170868
DOI: 10.1016/j.ijleo.2023.170868

Lowest Open‐Circuit Voltage Deficit Achievement to Attain High Efficient Antimony Selenosulfide Solar Cells

Jiabin Dong, Huizhen Liu, Liqun Ding, Bo Che, Peng Xiao, Zixiu Cao, Yue Liu, Licheng Lou, Rongfeng Tang, Jingshan Luo, Li Wu, Dongmei Li, Tao Chen and Yi Zhang

Adv Funct Materials, 2024, 34
DOI: 10.1002/adfm.202309764

Doping and precoating by Cu-metal and annealing impacts on some physical properties and applications of MnS thin films

H.M. Ali, E. Kh Shokr, A.A. Ismail, Moumen S. Kamel, H.A. Mohamed and M.F. Hasaneen

Optical Materials, 2024, 148, 114821
DOI: 10.1016/j.optmat.2023.114821

Performance enhancement of full inorganic Sb2S3 solar cells with MnS hole transport layers

Minghong Rui, Hangyu Li, Yuan Li, Wenqi Li and Sumei Wang

Next Energy, 2025, 7, 100240
DOI: 10.1016/j.nxener.2025.100240

Molten Salts Assisted Interfacial Engineering for Efficient and Low‐Cost Full‐Inorganic Antimony Sulfide Solar Cells

Yu Mao, Yi‐Hua Hu, Xiao‐Yang Hu, Li‐Quan Yao, Hu Li, Li‐Mei Lin, Peng Tang, Hui Li, Shuiyuan Chen, Jian‐Min Li and Gui‐Lin Chen

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202208409

10.3% Efficient Green Cd‐Free Cu2ZnSnS4 Solar Cells Enabled by Liquid‐Phase Promoted Grain Growth

Xiaojie Yuan, Jianjun Li, Jialiang Huang, Chang Yan, Xin Cui, Kaiwen Sun, Jialin Cong, Mingrui He, Ao Wang, Guojun He, Arman Mahboubi Soufiani, Junjie Jiang, Shujie Zhou, John A. Stride, Bram Hoex, Martin Green and Xiaojing Hao

Small, 2022, 18
DOI: 10.1002/smll.202204392

Interfacial Engineering towards Enhanced Photovoltaic Performance of Sb2Se3 Solar Cell

Huiling Cai, Rui Cao, Jinxiang Gao, Chen Qian, Bo Che, Rongfeng Tang, Changfei Zhu and Tao Chen

Adv Funct Materials, 2022, 32
DOI: 10.1002/adfm.202208243

Defects Passivation via Potassium Iodide Post‐Treatment for Antimony Selenosulfide Solar Cells with Improved Performance

Jiashuai Li, Zheng Gao, Xuzhi Hu, Shuxin Wang, Yongjie Liu, Chen Wang, Kailian Dong, Zhaofeng Zeng, Chen Tao and Guojia Fang

Adv Funct Materials, 2023, 33
DOI: 10.1002/adfm.202211657

Tailoring transporters for all-inorganic tin-based perovskite solar cells with efficiency exceeding 22% using SCAPS-1D simulator

Abdul Haseeb Hassan Khan and Ying-Chiao Wang

Inorganic Chemistry Communications, 2025, 179, 114707
DOI: 10.1016/j.inoche.2025.114707

From Organic to Inorganic: Manganese Sulfide as a Novel Hole Transport Layer for Perovskite Solar Cells

Satyabrata Guruprasad, Sonia Rani, Ashish Malik, Pilik Basumatary and Dhriti Sundar Ghosh

Energy Tech, 2025
DOI: 10.1002/ente.202500608

Enhanced Performance of Sb2S3 Solar Cells via Coevaporated MnS–PbS Composite Hole Transport Layers

Minghong Rui, Xiaokang Lu, Yuan Li, Sanmin Liu, Xiuhong Jin and Sumei Wang

ACS Appl. Energy Mater., 2025, 8, 11584
DOI: 10.1021/acsaem.5c01707

Enhanced photovoltaic performance in Sb2(S,Se)3/CuI planar-heterojunction solar cells: Insights from device simulation

Ramashanker Gupta, Swapnil Barthwal and Vinay Gupta

Results in Physics, 2025, 76, 108423
DOI: 10.1016/j.rinp.2025.108423

High-efficiency Sb2(S,Se)3 solar cells with MoO3 as a hole-transport layer

Yelei Xing, Huafei Guo, Jingjing Liu, Shuai Zhang, Jianhua Qiu, Ningyi Yuan and Jianning Ding

Journal of Alloys and Compounds, 2022, 927, 166842
DOI: 10.1016/j.jallcom.2022.166842

Bifacial and Semitransparent Sb2(S,Se)3 Solar Cells for Single‐Junction and Tandem Photovoltaic Applications

Chen Qian, Kaiwen Sun, Jialin Cong, Huiling Cai, Jialiang Huang, Caixia Li, Rui Cao, Ziheng Liu, Martin Green, Bram Hoex, Tao Chen and Xiaojing Hao

Advanced Materials, 2023, 35
DOI: 10.1002/adma.202303936

Cd‐Free Pure Sulfide Kesterite Cu2ZnSnS4 Solar Cell with Over 800 mV Open‐Circuit Voltage Enabled by Phase Evolution Intervention

Ao Wang, Jialiang Huang, Jialin Cong, Xiaojie Yuan, Mingrui He, Jianjun Li, Chang Yan, Xin Cui, Ning Song, Shujie Zhou, Martin A Green, Kaiwen Sun and Xiaojing Hao

Advanced Materials, 2024, 36
DOI: 10.1002/adma.202307733

Manipulating the Intrinsic Defect of MnS by Surface Sulfidation for Inverted Sb2(S,Se)3 Planar‐Heterojunction Solar Cells

Junjie Yang, Haolin Wang, Bo Che, Lei Huang, Jinxiang Gao, Zhiyuan Cai, Changfei Zhu, Rongfeng Tang and Tao Chen

Solar RRL, 2024, 8
DOI: 10.1002/solr.202400006

Post‐deposition Treatment of Sb2Se3 Enables Defect Passivation and Increased Carrier Transport Dimension for Efficient Solar Cell Application

Bo Che, Zhiyuan Cai, Haonan Xu, Shuwei Sheng, Qi Zhao, Peng Xiao, Junjie Yang, Changfei Zhu, Xusheng Zheng, Rongfeng Tang and Tao Chen

Angew Chem Int Ed, 2025, 64
DOI: 10.1002/anie.202425639

Sb2(S, Se)3-based photovoltaic cell with MoS2 as a hole transport layer: a numerical investigation

Mamta, R. Kumar, R. Kumari, K.K. Maurya and V.N. Singh

Materials Today Sustainability, 2022, 20, 100218
DOI: 10.1016/j.mtsust.2022.100218

A high-performance self-powered visible photodetector based on Co-doped Sb2Se3 thin film by electrochemical deposition

Zhihong Xie, Yufang Li, Hang Bai, Wei Wang, Honglie Shen, Long Wang, Andi Chen, Jingzhe Zhang and Jinjie Zheng

Surfaces and Interfaces, 2025, 72, 107372
DOI: 10.1016/j.surfin.2025.107372

Boosting Efficiency of Hydrothermally Grown Sb2S3 Solar Cells via Rational Sulfur Engineering

Gang Wang, Lin Feng, Yuqian Huang, Junjie Yang, Haolin Wang, Hongling Guo, Zhen Yu, Yongtai Yin, Liang Fang, Bao Lei, Youchao Tu, Jiangfeng Liu, Yi Zhang and Tao Chen

Adv Funct Materials, 2025
DOI: 10.1002/adfm.202518624

A Review on Suppressing Nonradiative Recombination Losses in Antimony Chalcogenide Thin‐Film Solar Cell

Yike Liu, Shunjian Xu, Yongping Luo, Guojie Chen, Shuo Chen, Zhuanghao Zheng and Guangxing Liang

Solar RRL, 2024, 8
DOI: 10.1002/solr.202400499

A Review of Interface Engineering in Antimony Chalcogenide Thin Film Solar Cells

Al Amin, Connor Cagno, Yizhao Wang and Feng Yan

Solar RRL, 2025, 9
DOI: 10.1002/solr.202500330

Artificial neural network assisted numerical analysis on performance enhancement of Sb2(S,Se)3 solar cell with SnS as HTL

Tanvir Mahtab Khan, Adnan Hosen, Okba Saidani and Sheikh Rashel Al Ahmed

Materials Today Communications, 2024, 40, 109639
DOI: 10.1016/j.mtcomm.2024.109639

Wide Bandgap Tellurium Oxide Semiconductor as A Back Contact Modifier for Efficient n-i-p Sb2Se3 Solar Cells

Dingzheng Wang, Zhi Lin, Anwen Gong, Chen Zuo, Jie Zeng, Yong Zhang, Kai Shen, Huafei Guo, Baomin Xu, Cong Liu and Yaohua Mai

ACS Appl. Mater. Interfaces, 2025, 17, 14179
DOI: 10.1021/acsami.4c19438

Bandgap grading via sputtering and post-selenization using SeS2 powder enabling Sb2(S,Se)3 solar cells with 7.1% efficiency

Yi-Cheng Lin, Chao-Hsuan Chang and Yu-Jen Hung

Solar Energy Materials and Solar Cells, 2023, 259, 112464
DOI: 10.1016/j.solmat.2023.112464

Post-Treatment of TiO2 Film Enables High-Quality Sb2Se3 Film Deposition for Solar Cell Applications

Yan Wang, Rongfeng Tang, Lei Huang, Chen Qian, Weitao Lian, Changfei Zhu and Tao Chen

ACS Appl. Mater. Interfaces, 2022, 14, 33181
DOI: 10.1021/acsami.2c07157

Design and Simulation of CdS-Free Sb2(S, Se)3 Solar Cells with Efficiency Exceeding 20%

Swapnil Barthwal, Siddhant Singh, Abhishek K. Chauhan and Ramesh Karuppannan

ACS Sustainable Chem. Eng., 2024, 12, 947
DOI: 10.1021/acssuschemeng.3c06210

Tuning the Electronic and Optical Properties of Cu2ZnSn1−xGexS4 Alloys for Photovoltaic Applications: A Hybrid Density Functional Theory and Device Simulation Approach

Souraya Goumri‐Said, Mohamed Issam Ziane, Mousaab Belarbi and Mohammed Benali Kanoun

Battery Energy, 2025, 4
DOI: 10.1002/bte2.20240066

Post‐deposition Treatment of Sb2Se3 Enables Defect Passivation and Increased Carrier Transport Dimension for Efficient Solar Cell Application

Bo Che, Zhiyuan Cai, Haonan Xu, Shuwei Sheng, Qi Zhao, Peng Xiao, Junjie Yang, Changfei Zhu, Xusheng Zheng, Rongfeng Tang and Tao Chen

Angewandte Chemie, 2025, 137
DOI: 10.1002/ange.202425639

Crystal Growth Promotion and Defect Passivation by Hydrothermal and Selenized Deposition for Substrate-Structured Antimony Selenosulfide Solar Cells

Guo-Jie Chen, Rong Tang, Shuo Chen, Zhuang-Hao Zheng, Zheng-Hua Su, Hong-Li Ma, Xiang-Hua Zhang, Ping Fan and Guang-Xing Liang

ACS Appl. Mater. Interfaces, 2022, 14, 31986
DOI: 10.1021/acsami.2c06805

Advanced simulation and design of two-terminal selenium/antimony selenosulfide tandem solar cells

Marwa S. Salem, Ahmed Shaker, Arwa N. Aledaily, Tariq S. Almurayziq, Muhammad Tauseef Qureshi and Mohamed Okil

Solar Energy Materials and Solar Cells, 2025, 283, 113455
DOI: 10.1016/j.solmat.2025.113455