On the solidification characteristics and corrosion resistance of in situ Mg–3Si–xCu composites

Milad Maleki, Massoud Emamy, Changiz Dehghanian and Hamed Mirzadeh

Vacuum, 2022, 206, 111559
DOI: 10.1016/j.vacuum.2022.111559

Synthesis and characterization of (Al,Si)3(Zr,Ti)-D022/D023 intermetallics: Understanding the stability of silicon substitution

Juan-Ricardo Castillo-Sánchez, Georges Salloum-Abou-Jaoude, Aïmen E. Gheribi, Paul Lafaye, Kentaro Oishi, Jean-Philippe Masse, Etienne Bousser, Gilles L’Espérance and Jean-Philippe Harvey

Acta Materialia, 2024, 262, 119455
DOI: 10.1016/j.actamat.2023.119455

Effect of Different T6 Heat Treatment Conditions on the Microstructure and Mechanical Properties of Al-7%Si-0.35% Mg (A356) Alloy for Use in Motorcycles

Reinaldo Almeida Rodrigues, João Carlos Martins da Costa, Antonio Claudio Kieling, Nayra Reis do Nascimento, Joaquim Souza de Oliveira, Joziane Silva da Cunha, Samantha Coelho Pinheiro, Gilberto Garcia del Pino, José Luis Valin Rivera, Meylí Valin Fernández and José Costa de Macedo Neto

Metals, 2025, 15, 692
DOI: 10.3390/met15070692

Mechanical and electrochemical behavior of Mg-Al-Si alloys fabricated with formation of fine Mg2Si phase

Prem Prakash Seth, Om Parkash and Devendra Kumar

Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2021, 235, 4129
DOI: 10.1177/0954406220967686

Microstructure evolution after hot working and heat treatment in 6082 aluminum alloy manufactured by horizontal continuous casting

Vladimír Mára, Jan Krčil and Jakub Horník

Journal of Alloys and Compounds, 2024, 1008, 176839
DOI: 10.1016/j.jallcom.2024.176839

The Influence of Creep Ageing on the Hardening Behavior and Microstructure of 7050 Aluminum Alloy

Yo-Lun Yang, Tsai-Fu Chung, Md Sadique Ali, Dilshad and Pengjing Zhao

Metals, 2023, 13, 196
DOI: 10.3390/met13020196

Improvement of mechanical properties of in situ Mg-Si composites via Cu addition and hot working

Milad Maleki, Hamed Mirzadeh and Massoud Emamy

Journal of Alloys and Compounds, 2022, 905, 164176
DOI: 10.1016/j.jallcom.2022.164176

A novel atomistic approach of estimating interfacial free energy and growth kinetics of primary Mg2Si during semi solid slurry formation of the novel Al–15Mg2Si–4.5Si composite

Indrani Mukherjee and Prosenjit Das

Appl. Phys. A, 2024, 130
DOI: 10.1007/s00339-024-07499-3

Development of Low superheat cast In-situ Al-xMg2Si-ySi composite and investigation of its microstructure and mechanical properties

Mohammed Kedir and Prosenjit Das

Materials Today Communications, 2025, 43, 111807
DOI: 10.1016/j.mtcomm.2025.111807

Effect of Silicon Addition on Microstructure, Hardness and Young’s Modulus of Injection Molded AZ91D Alloy

Yasutoshi Hideshima, Fumiya Maeda, Tadao Fukuta and Koichi Ozaki

J. Japan Inst. Metals, 2023, 87, 186
DOI: 10.2320/jinstmet.J2022049

Mechanistic performance of Al–Mg–Si alloy reinforced agro-waste residue for structural applications

Festus Ben and Takalani Madzivhandila

Journal of Materials Research and Technology, 2025, 38, 212
DOI: 10.1016/j.jmrt.2025.07.215

Role of YSZ Particles on Microstructural, Wear, and Corrosion Behavior of Al-15%Mg2Si Hybrid Composite for Marine Applications

Hamidreza Ghandvar, Mostafa Abbas Jabbar, Michal Petrů, Tuty Asma Abu Bakar, Lim Jia Ler and Seyed Saeid Rahimian Koloor

JMSE, 2023, 11, 1050
DOI: 10.3390/jmse11051050

Fabrication and hardness investigation of Al-15%Mg2Si-3%Cu in-situ cast composite

Hossein Ramezanalizadeh and S. Reza Iyzi

Advances in Materials and Processing Technologies, 2022, 8, 2277
DOI: 10.1080/2374068X.2021.1909331

An Excellent Corrosion-Resistant Al-Si-Mg-Mn Hot-Dip Coating for Steel

D. Pradhan, A. Mondal and A. Chakraborty

JOM, 2024, 76, 4207
DOI: 10.1007/s11837-024-06577-4

Effect of multi-layer deposition in solid-state friction stir surfacing-based additive manufacturing for fabrication of large-scale metal product

Souvik Karmakar, Rishabh Swarnkar and Surjya Kanta Pal

Journal of Materials Processing Technology, 2023, 320, 118107
DOI: 10.1016/j.jmatprotec.2023.118107

Experimental and theoretical investigation on refining mechanism of Mg2Si by Y addition in the Mg-Al-Si alloys

Jinhui Huang, Shuhong Liu, Martin Friák, Yanwen Liu and Yong Du

Journal of Alloys and Compounds, 2024, 1002, 175432
DOI: 10.1016/j.jallcom.2024.175432

Enhancing Plasma Electrolytic Oxidation (PEO) Coatings on Magnesium Alloys: The Critical Role of Surface Pretreatments

Arash Fattah‐alhosseini, Abdelhameed Fardosi, Alireza Askari, Minoo Karbasi, Burak Dikici and Mosab Kaseem

Adv Materials Inter, 2025, 12
DOI: 10.1002/admi.202500192

Study on microstructure and properties of Mg-Al-Si-Ca alloy by heat treatment

Ziqian Liu, Ji Zhou, Lei Yang, Yonglai Lai, Yong Liu and Hualan Jin

Journal of Alloys and Compounds, 2023, 947, 169431
DOI: 10.1016/j.jallcom.2023.169431

A comparative study of Mg–9Al–3Si high silicon magnesium alloy extruded from rapid solidification strip and conventional ingot casting processes

Xiaopeng Zhang, Chao Yang, Zhenshuai Li, Shuai Bao and Yungui Chen

Materials Chemistry and Physics, 2025, 342, 130965
DOI: 10.1016/j.matchemphys.2025.130965

Na-modified cast hypo-eutectic Mg–Mg2Si alloys for solid-state hydrogen storage

Xin F. Tan, Manjin Kim, Qinfen Gu, Julio Pinzon Piraquive, Guang Zeng, Stuart D. McDonald and Kazuhiro Nogita

Journal of Power Sources, 2022, 538, 231538
DOI: 10.1016/j.jpowsour.2022.231538

TIG Welding of EN AW-6082 Al Alloy: A Comparative Analysis of Filler Rods on Microstructural and Mechanical Performance

Bandar Alzahrani, Mohamed M. Z. Ahmed, Mohamed I. A. Habba, Ramy A. Fouad, Yousef G. Y. Elshaghoul and Elshafey Ahmed Gadallah

JMMP, 2025, 9, 21
DOI: 10.3390/jmmp9010021

Investigation of Intermetallic Phase Fractions and Dry-corrosive Wear Properties in Mg–Al–Si Ternary Alloy

Bunyamin Cicek, Levent Elen, Erkan Koc, A. Najah Saud and Yavuz Sun

Inter Metalcast, 2024, 18, 331
DOI: 10.1007/s40962-023-00992-0

Effect of Silicon Addition on Microstructure, Hardness and Young’s Modulus of Injection Molded AZ91D Alloy

Yasutoshi Hideshima, Fumiya Maeda, Tadao Fukuta and Koichi Ozaki

Mater. Trans., 2024, 65, 368
DOI: 10.2320/matertrans.MT-M2023197

Biodegradable phosphorus-modified Mg2Ge/Mg-Cu composite with good angiogenic, osteogenic, and antibacterial functionalities for bone-fixation applications

Xian Tong, Lanxin Gu, Jianchen Yu, Yue Han, Yue Huang, Xinkun Shen, Yuncang Li, Jixing Lin, Cuie Wen and Daoyi Miao

Journal of Magnesium and Alloys, 2025
DOI: 10.1016/j.jma.2025.06.015

Influence of boron carbide content on dry sliding wear performances of AZ91D magnesium alloy

I Aatthisugan, R Murugesan and TVVLN Rao

Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 2023, 237, 746
DOI: 10.1177/13506501221109033

Superior strength-ductility synergy of wire-arc directed energy deposited Mg-Al-Si alloys mediated by sub-rapid solidification

Qifei Han, Yueling Guo, Jinlong Hu, Rui Fu, Yangyu Yan and Changmeng Liu

Journal of Magnesium and Alloys, 2024, 12, 4594
DOI: 10.1016/j.jma.2023.09.009

Corrosion Behavior of 30 ppi TAD3D/5A05Al Composite in Neutral Salt Spray Corrosion

Zishen Li, Hongliang Yang, Yuxin Chen, Gaofeng Fu and Lan Jiang

Metals, 2024, 14, 488
DOI: 10.3390/met14050488

Investigation of microstructure and mechanical properties of Al-Si alloy thin walled cylindrical part fabricated by CMT based WAAM process

Annamalai Nanjundan, U Natarajan and D Simson

Phys. Scr., 2024, 99, 105606
DOI: 10.1088/1402-4896/ad7177

Effect of TiB2 Nanoparticle Content on the Microstructure and Mechanical Properties of TiB2/Mg-4Al-1.5Si Composites

Jian Liu, Xiaogang Chen, Wuxiao Wang, Yu Zhao and Na He

Materials, 2023, 16, 2852
DOI: 10.3390/ma16072852

Effect of Hot Extrusion and Annealing Treatment on Microstructure and Mechanical Properties of In Situ Mg2Si and TiB2 Hybrid Particulates Reinforced Magnesium Matrix Composites

Jian Liu, Yun Liu, Na He, Hang Gong and Wuxiao Wang

JOM, 2025, 77, 1563
DOI: 10.1007/s11837-024-07067-3

Impact of depositional direction and current on microstructure and mechanical properties of the bimetallic wall of ER5356/ER4043 fabricated by cold metal transfer based wire arc additive manufacturing

Soni Kesarwani, Narayana Yuvaraj and Mahendra Singh Niranjan

CIRP Journal of Manufacturing Science and Technology, 2024, 53, 17
DOI: 10.1016/j.cirpj.2024.06.013

Microstructure, Age-Hardening Behavior, and Mechanical Properties of Mg2Si/A6061 Composites

Li-Fu Yi, Zhao-Xuan Hao, Lei Liu, Weiwei Zhou, Naoyuki Nomura and Zhong-Chun Chen

J. of Materi Eng and Perform, 2025
DOI: 10.1007/s11665-025-11805-2

Segregation-Modified Interfacial Strength and Deformation Mechanism at Sicp/2009al Composite Interface

Xiaolei Guo, Wenfu Liu, Junhui Nie, Jun Song, Shule Xing and Peng Shi

SSRN Journal, 2022
DOI: 10.2139/ssrn.4165484

Influence of Heat Input Variations on Tribological Performance of Bimetallic Aluminum Alloy Walls Fabricated via Cold Metal Transfer-Based Wire Arc Additive Manufacturing

Soni Kesarwani, Narayana Yuvaraj and Mahendra Singh Niranjan

Arab J Sci Eng, 2025
DOI: 10.1007/s13369-025-10082-4

Effects of heat treatment and Y addition on the microstructure and mechanical properties of as-cast Mg–Si alloys

Mohammad Jamalpour and Reza Alizadeh

Materials Science and Engineering: A, 2022, 859, 144209
DOI: 10.1016/j.msea.2022.144209

X-ray Microscopic and Thermodynamic Model Assessments of Softening in TIG-Welded AA 6061-T651

Muhammad Zia ud din Urf Umer and Ahmed A. Tiamiyu

J. of Materi Eng and Perform, 2025, 34, 5167
DOI: 10.1007/s11665-024-09452-0

Microstructure and mechanical properties of as-cast and wrought Mg–Ni in-situ formed alloys

Milad Maleki, Fatemeh Jamei, Massoud Emamy and Hamed Mirzadeh

Materials Science and Technology, 2023, 39, 985
DOI: 10.1080/02670836.2022.2154934

Microstructural evolution and corrosion behavior of Al-20Mg2Si composites with trace La addition

Qiuju Zheng, Jing Wu, Tian Chen and Shuqian Fan

Journal of Materials Science & Technology, 2024, 175, 223
DOI: 10.1016/j.jmst.2023.07.057

First-principles calculations of the mechanical properties of Mg2Si intermetallic via ternary elements doping

Hai Hu, Tinging Liu, Zhendong Li, Xu Wang, Yanbiao Wang and Shaorong Li

International Journal of Materials Research, 2024, 115, 649
DOI: 10.1515/ijmr-2023-0274

Influence of Al foil interlayer on performance of vacuum diffusion bonding joint of 6061 aluminium alloy

Da-shuang Liu, Jian-hua Xu, Xiong-hui Li, Ping Wei, Yun Liang, Jian Qin, Hua-wei Sun, Tian-ran Ding, Zong-ye Ding, Su-juan Zhong, Lei Zhang and Wei-min Long

J. Iron Steel Res. Int., 2024, 31, 2404
DOI: 10.1007/s42243-024-01302-6

AZ91 MAGNEZYUM ALAŞIMININ SAF Si TOZU ORTAMINDA KAPLANABİLİRLİĞİNİN İNCELENMESİ

Onur AVCI, Tunahan KARACA, Tuna AYDOĞMUŞ and Bünyamin ÇİÇEK

Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi, 2023, 26, 33
DOI: 10.17780/ksujes.1164867

Wear Performance Enhancement of Interface Layer in Cold Metal Transfer-Based WAAM-Fabricated ER4043/ER5356 Bimetallic Wall Through Friction Stir Surface Treatment

Soni Kesarwani, Narayana Yuvaraj and Mahendra Singh Niranjan

Journal of Tribology, 2025, 147
DOI: 10.1115/1.4067281

Tribological Parameters Optimization of AZ31-SiC Composite Using Whale Optimization Algorithm

Kothuri Chenchu Kishor Kumar, Bandalamudi Raghu Kumar and Nalluri Mohan Rao

J. of Materi Eng and Perform, 2023, 32, 2735
DOI: 10.1007/s11665-022-07570-1

Analyzing the synergistic effects of hard ceramic TiB2 and rare earth oxide La2O3 on mechanical behaviour, wear resistance, and residual stress of AA6061-T6 hybrid composite fabricated via ultrasonic-assisted stir casting

Vibhu Singh, Qasim Murtaza and M.S. Niranjan

Materials Chemistry and Physics, 2024, 325, 129727
DOI: 10.1016/j.matchemphys.2024.129727

Morphology Modification of Mg2Si by Solution Treatment and Its Effects on the Mechanical Properties of TiB2/Mg-4Al-1.5Si Composites

Jian Liu, Xiaogang Chen, Wuxiao Wang, Shaoyong Qin and Haoran Xu

Crystals, 2022, 12, 1260
DOI: 10.3390/cryst12091260

Refinement of Mg2Si in Mg-Al-Si alloys through Ca and Y additions: A novel core-shell structure evolution mechanism and enhanced mechanical properties

Jinhui Huang, Shuhong Liu, Zheyuan Liu, Xuezhen Che, Martin Friák and Yong Du

Journal of Magnesium and Alloys, 2025
DOI: 10.1016/j.jma.2025.03.008

Rotating bending fatigue behavior of high-pressure diecast AlSi10MgMn alloy based on T5 heat treatment parameters

Cemil Çağrı Gülmez, Can Çivi and Gökhan Eyici

Materials Testing, 2024, 66, 1654
DOI: 10.1515/mt-2024-0128

Melt pool dynamics and microstructural growth prediction of additively manufactured thermoelectric material

Jagannath Suresh, Gagan K. Goyal, Haozheng Wang and Lei Zuo

CIRP Journal of Manufacturing Science and Technology, 2025, 59, 170
DOI: 10.1016/j.cirpj.2025.03.004

Effect of hot extrusion and subsequent annealing on the creep resistance of Mg-4Al-1.5Si alloy matrix composites

Jian Liu, Yun Liu, Na He, Hang Gong and Wuxiao Wang

Materials Science and Technology, 2025
DOI: 10.1177/02670836251352631

Tailoring the microstructure and properties of AA6061-T6/TiB2 cast composites with the addition of rare earth La2O3 nanoparticles

Vibhu Singh, Qasim Murtaza and M.S. Niranjan

Composites Communications, 2025, 53, 102230
DOI: 10.1016/j.coco.2024.102230

Modification of morphology/functionally graded distribution of Mg2Si particles by addition of phosphorus in centrifugal casting of Al–15 wt% Mg2Si composite

Ebrahim Aghazadeh and Ahad Samadi

J. Mater. Res., 2025
DOI: 10.1557/s43578-025-01676-7

Microstructure and damping properties of Mg–Si binary hypoeutectic alloys

Huashen Liu, Youping Sun, Jiangmei He, Guojian Luo and Zhang Luo

Materials Science and Technology, 2024, 40, 63
DOI: 10.1177/02670836231212987

The second phases of Mg–xAl–ySi–Ca alloys and their influences on properties

Ziqian Liu, Hualan Jin, Yonglai Lai, Zhiyu Xia, Gangbin Li, Hongmin Guo and Jie Ding

Materials Science and Technology, 2022, 38, 580
DOI: 10.1080/02670836.2022.2062649

Optimization of T5 heat treatment in high pressure die casting of Al–Si–Mg–Mn alloys by using an improved Kampmann-Wagner numerical (KWN) model

Jianyue Zhang, Emre Cinkilic, Xuejun Huang, Gerry Gang Wang, Yuchao (Chad) Liu, J.P. Weiler and Alan A. Luo

Materials Science and Engineering: A, 2023, 865, 144604
DOI: 10.1016/j.msea.2023.144604

Strengthening of Mg-Al-Zn-Mn alloy using SiC/Al nanocomposite extrusion

P. Emadi, B. Andilab, K. Borodianskiy and C. Ravindran

Journal of Alloys and Compounds, 2022, 922, 166243
DOI: 10.1016/j.jallcom.2022.166243

Effect of post-print heat treatment on the microstructure and hardness of aluminum alloy ER4943 produced by arc-directed energy deposition

J. Tapajna, M. Shojaee, B.F. Orchard, Y.N. Aditya, M.A. Whitney, H. Jin, J. Galloway, T. Nguyen and M.J. Benoit

Materials Today Communications, 2025, 48, 113485
DOI: 10.1016/j.mtcomm.2025.113485

Segregation-modified interfacial strength and deformation mechanism at SiCp/2009Al composite interface

Xiaolei Guo, Wenfu Liu, Junhui Nie, Jun Song, Shule Xing and Peng Shi

Materials Characterization, 2022, 194, 112267
DOI: 10.1016/j.matchar.2022.112267

A Molecular Dynamics Study of Nucleation and Grain Growth of Novel Al-15Mg₂Si-4.5Si Composite during Rapid Cooling Based Semi Solid Slurry Preparation

Indrani Mukherjee and Prosenjit Das

SSP, 2023, 347, 197
DOI: 10.4028/p-za0DwV

Morphology and Properties of Mg2Si Phase Modified by Pb in As-Cast Mg-2.5Si-xPb Alloys

Liang Chen, Wenpeng Yang, Hongbao Cui, Ying Wang and Zhichao Xu

Materials, 2024, 17, 1811
DOI: 10.3390/ma17081811

Towards a morphological control of Mg2Si and superior tensile properties of high-Zn Mg-0.6Si (-Zn) alloys

Guilherme Lisboa de Gouveia, Amauri Garcia and José Eduardo Spinelli

Materials Letters, 2021, 299, 130084
DOI: 10.1016/j.matlet.2021.130084

Strontium-based additive for enhanced aluminum A356-reinforced Al2O3 composite mechanical properties and microstructures

Tira Kurnia Saputri, Anne Zulfia and Rahmandhika Firdauzha Hary Hernandha

Metall. Res. Technol., 2025, 122, 112
DOI: 10.1051/metal/2024098

Improving wear and corrosion resistances of Mg2Si/AZ91 composites via tailoring microstructure and intrinsic properties of Mg2Si induced by Sb modification

Peng Xiao, Yimin Gao, Yupeng Sheng, Cuicui Yang, Zhiwei Liu, Yanliang Yi, Wenyu Wu, Qiqiang Zhao and Manoj Gupta

Journal of Magnesium and Alloys, 2024, 12, 4493
DOI: 10.1016/j.jma.2023.07.021

Effects of TiB2 nanoparticles and ultrasonic vibration on the mechanical properties of an Mg-4Al-1.5Si alloy

Wuxiao Wang, Xiaogang Chen, Jian Liu, Dongchao Liu, Zhengzheng Liu, Wuzhao Li and Na He

Journal of Alloys and Compounds, 2022, 912, 165213
DOI: 10.1016/j.jallcom.2022.165213

Effect of neodymium on microstructure, mechanical properties, and corrosion behavior of Mg-2Si-xNd alloys fabricated by powder metallurgy

Yudi Nugraha Thaha, Bintoro Siswayanti, Bunga Rani Elvira, Adi Noer Syahid, Nadia Rachmawati, Aprilia Erryani, Daniel Panghihutan Malau, Dhyah Annur, Franciska Pramuji Lestari, Talitha Asmaria, Muttaqin, Ika Kartika and Albertus Deny Heri Setyawan

Journal of Rare Earths, 2024
DOI: 10.1016/j.jre.2024.11.011

Innovative mixed acid leaching of talc for highly efficient magnesium extraction and valorization of silicon resources

Yu Huang, Zhenghao Wang, Yeqiu Zhao, Yangjin Wei, Taixu Hao, Jiandong Chen, Junyun Cheng, Meiqing Shi, Xu Yan, Liyuan Chai, Qingwei Wang and Liyuan Zhang

Minerals Engineering, 2025, 232, 109511
DOI: 10.1016/j.mineng.2025.109511

Gamma-irradiation induced synthesis of Ag-decorated Mg2Si: ion beam analysis investigation for enhanced thermoelectric performance

M. S. Shalaby, Manale Noun, Soraya Abdelhaleem and M. I. A. Abdel Maksoud

Discov Appl Sci, 2025, 7
DOI: 10.1007/s42452-025-06645-7

Mechanical properties enhancement of Mg–4Si in-situ composites by friction stir processing

R. Taghiabadi and A. Moharami

Materials Science and Technology, 2021, 37, 66
DOI: 10.1080/02670836.2020.1866848

Synergistic effects of boron carbide and eggshell particles on mechanical and tribological properties of ultrasonic-assisted stir cast aluminium alloy based composites

Vibhu Singh, Soni Kesarwani and Mahendra Singh Niranjan

Proceedings of the Institution of Mechanical Engineers, Part E: Journal of Process Mechanical Engineering, 2024
DOI: 10.1177/09544089241299853