Issue 1, 2024

Studies on bimetallic Cu–Ag supported alumina catalysts for hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran

Abstract

Selective synthesis of 2,5-dimethylfuran (DMF) from 5-hydroxymethyl furfural (HMF) by hydrodeoxygenation (HDO) was studied over Ag-promoted Cu/γ-Al2O3 catalysts. A series of bimetallic Ag–Cu supported on γ-Al2O3 catalysts with varying Ag amounts were prepared and characterized using different techniques. The results indicated that the addition of Ag to Cu/γ-Al2O3 improved the dispersion of Cu in the catalyst, and the activity of Cu–Ag catalysts was dependent on the amount of Ag present. The catalyst with 2 wt% Ag-10% Cu exhibited a highest DMF yield of 93% with the complete conversion of HMF at 180 °C, and its activity was well correlated with its characteristics. The study also established the optimum reaction conditions for these catalysts and demonstrated their good reusability upon recycling. These findings provide valuable insights into the design and development of efficient and sustainable catalytic processes for the production of DMF from HMF.

Graphical abstract: Studies on bimetallic Cu–Ag supported alumina catalysts for hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran

  • This article is part of the themed collection: Biorefining

Supplementary files

Article information

Article type
Paper
Submitted
24 Sext 2023
Accepted
06 Nov 2023
First published
07 Nov 2023

Sustainable Energy Fuels, 2024,8, 43-53

Studies on bimetallic Cu–Ag supported alumina catalysts for hydrodeoxygenation of 5-hydroxymethylfurfural to 2,5-dimethylfuran

D. D. Lakshmi, Yogita, B. Srinivasa Rao and N. Lingaiah, Sustainable Energy Fuels, 2024, 8, 43 DOI: 10.1039/D3SE01096A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements