Issue 3, 2020

Efficient ternary organic photovoltaics with two polymer donors by minimizing energy loss

Abstract

Efficient ternary organic photovoltaics (OPVs) are fabricated with two polymer materials PF2 and J71 as donors and Y6 as the acceptor. The PF2 and J71 based binary OPVs exhibit 10.26% and 9.56% power conversion efficiency (PCE), respectively. Even with similar highest occupied molecular orbital (HOMO) energy levels of PF2 and J71, the J71 based binary OPVs show a relatively high open circuit voltage (VOC) of 0.86 V compared with 0.71 V for PF2 based binary OPVs. The VOCs of ternary OPVs monotonously increased with the increase of J71 content in donors, which should be mainly ascribed to the reduced energy loss according to the VOCs of two binary OPVs and the HOMO energy levels of two donors. The short circuit current density (JSC) and fill factor (FF) of ternary OPVs can also be simultaneously enhanced with the J71 content up to 30 wt% in donors, leading to 12.12% PCE of the optimized ternary OPVs with a JSC of 24.97 mA cm−2, a FF of 64.70% and a VOC of 0.75 V. Reducing energy loss by the ternary strategy is rarely reported in the literature, which should also be an efficient method to realize performance improvement of OPVs.

Graphical abstract: Efficient ternary organic photovoltaics with two polymer donors by minimizing energy loss

Supplementary files

Article information

Article type
Paper
Submitted
01 Nov 2019
Accepted
02 Dec 2019
First published
03 Dec 2019

J. Mater. Chem. A, 2020,8, 1265-1272

Efficient ternary organic photovoltaics with two polymer donors by minimizing energy loss

X. Ma, Q. An, O. A. Ibraikulov, P. Lévêque, T. Heiser, N. Leclerc, X. Zhang and F. Zhang, J. Mater. Chem. A, 2020, 8, 1265 DOI: 10.1039/C9TA12025D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements