Issue 34, 2014

A novel Gaussian-DAEM-reaction model for the pyrolysis of cellulose, hemicellulose and lignin

Abstract

This work deals with the pyrolysis kinetics of cellulose, hemicellulose and lignin. Experiments were carried out in a thermogravimetric analyzer (TGA Q5000) in the inert atmosphere of nitrogen at a heating rate of 10 K min−1. The single Gaussian distributed activation energy model (DAEM) was utilized to study the pyrolysis kinetics. Kinetic parameters such as the pre-exponential factor (k0), mean activation energy (E0) and standard variance (σ) were computed by a pattern search algorithm. It was found that the calculated kinetic parameters using the single Gaussian-DAEM-reaction model could reproduce the differential thermogravimetric (DTG) curves of cellulose very well. However, there existed obvious deviations in the whole range of temperatures between the calculated and experimental data for hemicellulose and lignin. In order to describe the thermal decompositions of hemicellulose and lignin more accurately, a novel double Gaussian-DAEM-reaction model consisting of two parallel partial reactions was developed to describe the pyrolysis processes. Calculated results of the fitting procedure using the double Gaussian-DAEM-reaction model showed good agreement with experimental DTG data of hemicellulose and lignin.

Graphical abstract: A novel Gaussian-DAEM-reaction model for the pyrolysis of cellulose, hemicellulose and lignin

Article information

Article type
Paper
Submitted
19 Feb 2014
Accepted
31 Mar 2014
First published
31 Mar 2014

RSC Adv., 2014,4, 17513-17520

A novel Gaussian-DAEM-reaction model for the pyrolysis of cellulose, hemicellulose and lignin

J. Zhang, T. Chen, J. Wu and J. Wu, RSC Adv., 2014, 4, 17513 DOI: 10.1039/C4RA01445F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements