Key factors influencing direct CO2 capture from air

Ao-Chuan Zheng, Hao-Sheng Xu, Lin Du, Yan Li and Xin-Ming Hu

Ind. Chem. Mater., 2026
DOI: 10.1039/D5IM00391A

Investigation of the Effects of the Strut Diameter of Non-Stochastic Cells on Flow Characteristics

Gideon Simon Mduma, Dong-Gyu Ahn and Young Dal Jeong

Int. J. of Precis. Eng. and Manuf.-Green Tech., 2026, 13, 659
DOI: 10.1007/s40684-025-00806-0

Liquid Distribution Performance of Triply Periodic Minimal Surface Packings: Effects of Topology, Porosity, Flow Rate and Inlet Configuration

Abolhasan Ameri, Christophe Duwig and Henrik Kusar

Chemical Engineering Research and Design, 2026
DOI: 10.1016/j.cherd.2026.04.002

Advancing carbon capture from bench to pilot scale using dynamic similitude

Tiras Y. Lin, Thomas Moore, Du Nguyen, Pratanu Roy, Nikola A. Dudukovic, Kansas Seung, Michael Troksa, Rebecca L. Walton, Christopher Hahn, Eric B. Duoss and Sarah Baker

Cell Reports Physical Science, 2024, 5, 102019
DOI: 10.1016/j.xcrp.2024.102019

Countercurrent flow characteristics of next generation solvent in novel 3D printed columns for carbon capture

Rajesh Kumar Singh, Yucheng Fu, Chao Zheng, Jie Bao and Zhijie Xu

Chemical Engineering Journal, 2025, 505, 159454
DOI: 10.1016/j.cej.2025.159454

Macro-micro structure controlled hierarchical porous copper catalysts via laser powder bed fusion and chemical dealloying of a FeCoNiCu high-entropy alloy

Xueteng Zhu, Jili Cai, Chengjian Zhang, Kun Cheng, Jiahao Lu, Mengmeng Yang, Sheng Guo, Chao Cai and Yusheng Shi

Journal of Alloys and Compounds, 2025, 1026, 180412
DOI: 10.1016/j.jallcom.2025.180412

The Chemistry and Thermodynamics of Point Source CO2 Capture by Liquid Chemical Absorption and Its Impact on Process Performance

Graeme Puxty, Marcel Maeder and Thomas Moore

Chem. Rev., 2025, 125, 10956
DOI: 10.1021/acs.chemrev.5c00377

Topology optimization of carbon capture packing using an improved multiphysics-coupled algorithm

Yilun Zhou, Guojie Qi, Yongkang Cui and Shujuan Wang

Chemical Engineering Journal, 2026, 530, 173610
DOI: 10.1016/j.cej.2026.173610

Advancing CO2 separation: exploring the potential of additive manufacturing in membrane technology

Ying Huay Cheong, Li Sze Lai, Linggao Shi, Swee Pin Yeap, Yin Fong Yeong, Wee Horng Tay and Zeinab Abbas Jawad

Prog Addit Manuf, 2024, 9, 2327
DOI: 10.1007/s40964-024-00587-z

Crystal-Inspired Cellular Metamaterials and Triply Periodic Minimal Surfaces

Maxim Arsentev, Eduard Topalov, Sergey Balabanov, Evgenii Sysoev, Igor Shulga, Marsel Akhmatnabiev, Maxim Sychov, Ekaterina Skorb and Michael Nosonovsky

Biomimetics, 2024, 9, 285
DOI: 10.3390/biomimetics9050285

An Overview of Additive Manufacturing of Triply Periodic Minimal Surface (TPMS) Structures

Md Sakhawat Hossain, Md Mosharrof Hossain and Sabrina Nilufar

Polymers, 2025, 17, 3307
DOI: 10.3390/polym17243307

Enhancing the performance of composite phase change materials using novel triply periodic minimal surface structures

Priscilla Jia Yuan Fok, Ranjith Kandasamy, Jin Yao Ho and Teck Neng Wong

Chemical Engineering Journal, 2023, 476, 146352
DOI: 10.1016/j.cej.2023.146352

Numerical Investigation of Micro-Scale Mass Transfer in Stretched and Compressed Kelvin-Cell Packings for Shipboard Carbon Capture

Bohao Wu, Nan Wu, Yongqi Li, Ying Bi, Daan Cui, Haoheng Liu, Chao Chang and Yulong Ji

JMSE, 2026, 14, 595
DOI: 10.3390/jmse14070595

Polymer‐Sorbent Direct Air Capture Contactors with Complex Geometries 3D‐Printed via Templated Phase Inversion

Seo‐Yul Kim, Hannah E. Holmes, Yuxiang Wang, Simon C. Weston and Ryan P. Lively

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202410356

Triply Periodic Minimal Surface (TPMS) Structures in 3D‐Printed Catalyst Supports: Advanced Optimization of Heat Transfer, Mass Transport, and Mechanical Stability for Catalysis

Shen‐wei Bai, Yong‐jie Hao, Yue‐kai Yan, Lian‐bi Li, Peng‐fei Cheng, Zhe‐yan Tu, Hu Zhou, Lin Cheng, Hui Mei and Wei‐guo Ding

Adv Materials Technologies, 2026
DOI: 10.1002/admt.202502352

Bioinspired monolithic catalyst support based on triply periodic minimal surfaces for catalytic microreactors: A case study of hydrogen production

Jiaxuan Li, Yang Yang, Xun Zhu, Dingding Ye and Qiang Liao

International Journal of Hydrogen Energy, 2024, 93, 1143
DOI: 10.1016/j.ijhydene.2024.11.038

3D Concrete Printing of Triply Periodic Minimum Surfaces for Enhanced Carbon Capture and Storage

Kun‐Hao Yu, Teng Teng, So Hee Nah, Hua Chai, Yefan Zhi, Kun‐Yu Wang, Yinding Chi, Peter Psarras, Masoud Akbarzadeh and Shu Yang

Adv Funct Materials, 2025, 35
DOI: 10.1002/adfm.202509259

Investigation of turbulent flow in a Schwarz Diamond monolith using MRI and CFD

Daniel A. Clarke, Michael J. Coe, Petrik Galvosas and Daniel J. Holland

Chemical Engineering Journal, 2025, 524, 168921
DOI: 10.1016/j.cej.2025.168921

Enhanced CO2 Hydrate Formation via Triply Periodic Minimal Surface (TPMS) Structures

Jiayao Shi, Jiateng Duan, Guanghan Yan, Haoyu Li, Sheng Xing, Boran Jia, Lanlan Jiang and Yu Liu

Energy Fuels, 2025, 39, 21990
DOI: 10.1021/acs.energyfuels.5c04396

Accelerating climate technologies through the science of scale-up

Thomas Moore, Andrew A. Wong, Brian Giera, Diego I. Oyarzun, Aldair E. Gongora, Tiras Y. Lin, Wenqin Li, Tracie Owens, Du Nguyen, Victoria M. Ehlinger, Aditya Prajapati, Seung Whan Chung, Pratanu Roy, Joshua DeOtte, Nicholas R. Cross, Alvina Aui, Youngsoo Choi, Maxwell Goldman, Hui-Yun Jeong, Congwang Ye, Amitava Sarkar, Eric B. Duoss, Christopher Hahn and Sarah E. Baker

Nat Chem Eng, 2024, 1, 731
DOI: 10.1038/s44286-024-00143-0

Numerical parametric study on fluid dynamics performance of a novel corrugated fin packing

Enhua Zheng, Lina Tang, Zhixiang Xia, Mengxiang Fang, Ximing Hu, Yao Fu, Young-Ok Park and Tao Wang

Chemical Engineering and Processing - Process Intensification, 2025, 218, 110551
DOI: 10.1016/j.cep.2025.110551

Schwarzites and Triply Periodic Minimal Surfaces: From Pure Topology Mathematics to Macroscale Applications

Levi C. Felix, Rushikesh Ambekar, Raphael M. Tromer, Cristiano F. Woellner, Varlei Rodrigues, Pulickel M. Ajayan, Chandra S. Tiwary and Douglas S. Galvao

Small, 2025, 21
DOI: 10.1002/smll.202400351

Three-Dimensional Bubble Fluidics in Architected Porous Media

Jonathan T. Davis, Kansas Seung, Anna Guell Izard, Hawi B. Gemeda, Ariel Gluck, Thomas Moore, Nikola A. Dudukovic, Erika J. Fong, Joshua R. Deotte, Sarah E. Baker and Eric B. Duoss

ACS Appl. Mater. Interfaces, 2025, 17, 54230
DOI: 10.1021/acsami.5c12167

Modelling of industrial packed bed reactors: connecting CFD with imaging and AI

Shashank S Tiwari, Racha V Kumar, Balivada K Kumar, Steffen Berg and Himanshu Goyal

Current Opinion in Chemical Engineering, 2026, 52, 101247
DOI: 10.1016/j.coche.2026.101247

Visual depiction and numerical characterization of intricate flow in triply periodic minimal surface foams

Jiaxuan Li, Yang Yang, Xun Zhu, Dingding Ye, Rong Chen and Qiang Liao

Physics of Fluids, 2024, 36
DOI: 10.1063/5.0215608

A Scalable Reduced‐Order Model for the Steady Navier–Stokes Equations

Seung Whan Chung, Siu Wun Cheung, Youngsoo Choi, Pratanu Roy, Thomas Roy, Tiras Y. Lin, Du T. Nguyen, Christopher Hahn, Eric B. Duoss and Sarah E. Baker

Numerical Meth Engineering, 2026, 127
DOI: 10.1002/nme.70314

Multiphase computational fluid dynamics modeling of reacting flows in absorption columns for carbon capture

Yash Girish Shah, Amiee C. Jackson, Costas Tsouris, Charles E.A. Finney and Grigorios Panagakos

Digital Chemical Engineering, 2025, 16, 100252
DOI: 10.1016/j.dche.2025.100252

Novel design approach based on triply periodic minimal surfaces (TPMS) for gas–liquid contactor packing

Gregory Homem Alves César Ribeiro, David Rouzineau, Michel Meyer and Nathalie Di Miceli Raimondi

Chemical Engineering Science, 2025, 304, 121062
DOI: 10.1016/j.ces.2024.121062

A Novel Approach to Electrochemical Direct Air Capture Using Aqueous l-Arginine Amino Acid Solutions as an Absorption Solvent: Proof-of-Concept and Technoeconomics

Dominik Heß, Michael Rubin and Roland Dittmeyer

Ind. Eng. Chem. Res., 2025, 64, 14973
DOI: 10.1021/acs.iecr.4c04844

Performance Enhancement of a Membrane Electrochemical Cell for CO2 Capture

Alexander P. Muroyama, Dania Abu-Arja, Barbara Kohlrausch Rogerio, Davide Masiello, Maximilian Winzely and Lorenz Gubler

J. Electrochem. Soc., 2024, 171, 013504
DOI: 10.1149/1945-7111/ad1acf

Microstructure and Catalytic Activity of Hierarchical Porous HEA Catalysts Fabricated by 3D Printing/Chemical Dealloying

Xueteng Zhu, Jili Cai, Chengjian Zhang, Kun Cheng, Jiahao Lu, Huzhe Yu and Chao Cai

Catalysts, 2026, 16, 235
DOI: 10.3390/catal16030235

Direct air capture with amino acid solvent: Operational optimization using a crossflow air‐liquid contactor

Keju An, Kai Li, Cheng‐Min Yang, Jamieson Brechtl, Diana Stamberga, Mingkan Zhang and Kashif Nawaz

AIChE Journal, 2024, 70
DOI: 10.1002/aic.18429

Numerical assessment of triply periodic minimal surfaces for direct air capture of carbon dioxide

Kellis Kincaid, Filipe L. Brandao, Flavio D.F. Chuahy and Kashif Nawaz

International Journal of Greenhouse Gas Control, 2025, 146, 104457
DOI: 10.1016/j.ijggc.2025.104457

Incorporating ineffective porosity into mass transfer models for improving prediction of CO2 absorption into packed columns

Bin Xu, Xiaoyi Gao, Xi Tang, Xiaoshan Li, Cong Luo, Fan Wu, Wen Chen and Liqi Zhang

Chemical Engineering Science, 2026, 328, 123757
DOI: 10.1016/j.ces.2026.123757