Issue 46, 2023

A facile strategy to achieve vitrimer-like elastomer composites with lignin as a renewable bio-filler toward excellent reinforcement and recyclability

Abstract

Reinforcement and cross-linking are two critical issues in the rubber industry. However, carbon black (CB) as the most dominant reinforcing filler is derived from fossil resource-derived chemicals. And currently adopted cross-linking strategies would result in difficulties in the recycling of end-of-life rubbers. Herein, lignin, the most abundant renewable aromatic polymer, was developed as an effective reinforcing filler of rubber. The butadiene–styrene–vinylpyridine rubber (VPR) was selected as the rubber matrix, and a facile and cost-effective strategy was provided to improve the compatibility and interfacial interaction between lignin and the non-polar rubber matrix. Based on the Zn2+–pyridine coordination between the pyridine groups in the VPR chains and phenoxy groups in the lignin molecules, the lignin particles could obtain fine dispersion in the rubber matrix, exhibiting an excellent reinforcing effect. Moreover, the pyridine groups in the VPR chains were developed as cross-linking points, and the VPR could be effectively cross-linked based on the chemical reaction between the pyridine group and alkyl halide, producing quaternized pyridine groups. Due to the existence of the exchange reaction via the C–N transalkylation of the quaternized pyridine groups, the lignin/VPR composites could show vitrimer-like properties and are endowed with good reprocessability at high temperatures. Additionally, due to the photothermal conversion capability of lignin, the lignin/VPR composites could exhibit good photothermal performance triggered by 808 nm near-infrared light, and further possess light-driven shape memory properties. Hence, we envisage that this work can provide an avenue to design and fabricate green, sustainable, and recyclable elastomer materials with lignin as a renewable bio-filler.

Graphical abstract: A facile strategy to achieve vitrimer-like elastomer composites with lignin as a renewable bio-filler toward excellent reinforcement and recyclability

Supplementary files

Article information

Article type
Paper
Submitted
30 اگست 2023
Accepted
02 اکتوٗبر 2023
First published
18 اکتوٗبر 2023

J. Mater. Chem. A, 2023,11, 25356-25367

A facile strategy to achieve vitrimer-like elastomer composites with lignin as a renewable bio-filler toward excellent reinforcement and recyclability

G. Zhang, C. Tian, H. Chu, J. Liu, B. Guo and L. Zhang, J. Mater. Chem. A, 2023, 11, 25356 DOI: 10.1039/D3TA05205B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements