Issue 49, 2022

Polyurethane–gelatin methacryloyl hybrid ink for 3D printing of biocompatible and tough vascular networks

Abstract

A polyurethane–gelatin methacryloyl (PU–GelMA) hybrid ink was developed as a photo-crosslinkable elastic hydrogel. With the additional acrylic monomer, the ink can be tuned to accommodate elasticity and printability. Attributed to the shear-thinning properties of GelMA, PU–GelMA was preferable for extrusion printing. 3D-constructs were printed by direct extrusion or by using a sacrificial scaffold to resemble the vascular networks. The proliferation of endothelial cells on the PU–GelMA hydrogel indicated decent biocompatibility and potential utilization in artificial vessels.

Graphical abstract: Polyurethane–gelatin methacryloyl hybrid ink for 3D printing of biocompatible and tough vascular networks

Supplementary files

Article information

Article type
Communication
Submitted
16 اپریل 2022
Accepted
23 میٔ 2022
First published
23 میٔ 2022

Chem. Commun., 2022,58, 6894-6897

Polyurethane–gelatin methacryloyl hybrid ink for 3D printing of biocompatible and tough vascular networks

Y. Huang, H. Zhao, X. Wang, X. Liu, Z. Gao, H. Bai, F. Lv, Q. Gu and S. Wang, Chem. Commun., 2022, 58, 6894 DOI: 10.1039/D2CC02176E

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements