Issue 46, 2021

An electrochemically reduced ultra-high mass loading three-dimensional carbon nanofiber network: a high energy density symmetric supercapacitor with a reproducible and stable cell voltage of 2.0 V

Abstract

Commercial supercapacitors need a high mass loading of more than 10 mg cm−2 and a high working potential window to resolve the low energy density concern. Herein, we have demonstrated a thick, ultrahigh mass loading (35 mg cm−2) and wide cell voltage electrochemically reduced layer-by-layer three-dimensional carbon nanofiber network (LBL 3D-CNF) electrode via electrospinning, sodium borohydride treatment, carbonization, and electro-reduction techniques. During the electro-reduction technique, Na+ is adsorbed onto the various defect sites of LBL 3D-CNFs, which properly inhibits the formation of the intermediate HER (hydrogen evolution reaction) product, leading to a wide cell voltage, whereas the LBL 3D-CNF network evokes an opportunity for storing a greater number of charges, resulting in excellent electrochemical performances. A symmetric supercapacitor with a reproducible and stable cell voltage of 2.0 V is constructed and demonstrated. The as-constructed device can deliver an areal energy output of 1922 μW h cm−2 at a power density of 3979 W kg−1 equal to a gravimetric energy density of 27 W h kg−1, and an outstanding cyclic durability of 97.4% after 20 000 GCD cycles. These record-breaking performances would make our device one of the most promising candidates from an industrial point of view.

Graphical abstract: An electrochemically reduced ultra-high mass loading three-dimensional carbon nanofiber network: a high energy density symmetric supercapacitor with a reproducible and stable cell voltage of 2.0 V

Supplementary files

Article information

Article type
Paper
Submitted
10 ستمبر 2021
Accepted
28 اکتوٗبر 2021
First published
29 اکتوٗبر 2021

Nanoscale, 2021,13, 19537-19548

An electrochemically reduced ultra-high mass loading three-dimensional carbon nanofiber network: a high energy density symmetric supercapacitor with a reproducible and stable cell voltage of 2.0 V

G. P. Ojha, B. Pant, J. Acharya and M. Park, Nanoscale, 2021, 13, 19537 DOI: 10.1039/D1NR05943B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements