Issue 38, 2017

One-step detonation-assisted synthesis of Fe3O4-Fe@BCNT composite towards high performance lithium-ion batteries

Abstract

An Fe3O4-Fe@BCNT composite was successfully synthesized via detonation of a mixture of hexogen (C3H6N6O6) and ferrocene (C10H10Fe), in which bamboo-like carbon nanotubes encapsulating iron nanoparticles attached to Fe3O4 flakes (up to 58.1%) were formed. In the detonation process, hexogen was used to generate high temperature and high pressure, while ferrocene was used as a carbon source and catalyst. The recovered Fe3O4-Fe@BCNT composite was characterized by TEM, SEM, XRD, XPS, and Raman spectroscopy. The results indicate that multi-walled carbon tubes with a bamboo-like structure are formed, in which iron nanoparticles are encapsulated. The length of the multi-layered nanotubes (about 18–20 layers) is over 600 nm with diameters in the range of 20–30 nm. The content of Fe3O4 flakes dispersed into the carbon tubes is affected by the atomic ratio of C to Fe. In addition, the Fe3O4-Fe@BCNT composite exhibits excellent electrochemical performance as an anode material in Li-ion batteries. The charge–discharge coulombic efficiency is up to 81.1% in the first cycle. After 100 cycles, the discharge capacity steadily increases up to nearly 800 mA h g−1 due to activation. The rate capability of the Fe3O4-Fe@BCNT composite is also excellent at current densities ranging from 100 to 2000 mA g−1.

Graphical abstract: One-step detonation-assisted synthesis of Fe3O4-Fe@BCNT composite towards high performance lithium-ion batteries

Article information

Article type
Paper
Submitted
22 جوٗلایی 2017
Accepted
24 اگست 2017
First published
31 اگست 2017

Nanoscale, 2017,9, 14376-14384

One-step detonation-assisted synthesis of Fe3O4-Fe@BCNT composite towards high performance lithium-ion batteries

L. Du, C. Xu, J. Liu, Y. Lan and P. Chen, Nanoscale, 2017, 9, 14376 DOI: 10.1039/C7NR05362B

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements