Issue 21, 2016

Revealing the semiconductor–catalyst interface in buried platinum black silicon photocathodes

Abstract

Nanoporous “black” silicon semiconductors interfaced with buried platinum nanoparticle catalysts have exhibited stable activity for photoelectrochemical hydrogen evolution even after months of exposure to ambient conditions. The mechanism behind this stability has not been explained in detail, but is thought to involve a Pt/Si interface free from SiOx layer that would adversely affect interfacial charge transfer kinetics. In this paper, we resolve the chemical composition and structure of buried Pt/Si interfaces in black silicon photocathodes from a micron to sub-nanometer level using aberration corrected analytical scanning transmission electron microscopy. Through a controlled electrodeposition of copper on samples aged for one month in ambient conditions, we demonstrate that the main active catalytic sites are the buried Pt nanoparticles located below the 400–800 nm thick nanoporous SiOx layer. Though hydrogen production performance degrades over 100 h under photoelectrochemical operating conditions, this burying strategy preserves an atomically clean catalyst/Si interface free of oxide or other phases under air exposure and provides an example of a potential method for stabilizing silicon photoelectrodes from oxidative degradation in photoelectrochemical applications.

Graphical abstract: Revealing the semiconductor–catalyst interface in buried platinum black silicon photocathodes

Supplementary files

Article information

Article type
Paper
Submitted
25 مارٕچ 2016
Accepted
25 اپریل 2016
First published
26 اپریل 2016

J. Mater. Chem. A, 2016,4, 8123-8129

Revealing the semiconductor–catalyst interface in buried platinum black silicon photocathodes

J. A. Aguiar, N. C. Anderson and N. R. Neale, J. Mater. Chem. A, 2016, 4, 8123 DOI: 10.1039/C6TA02505F

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements