Issue 20, 2016

A mechanical pencil lead-supported carbon nanotube/Au nanodendrite structure as an electrochemical sensor for As(iii) detection

Abstract

A mechanical pencil lead (MPL), an easily obtainable carbon-based material with a consistent size, was used as a frame to construct an MPL-supported carbon nanotube/Au nanodendrite (MPL-CNT/AuND) sensor through simple electrodeposition of Au onto the MPL in the presence of CNTs. A nanodendrite structure was adopted to ensure large numbers of active electrochemical sites because of its hierarchical structure with well-aligned terraces; the CNTs were used to firmly adhere the fabricated Au nanodendrites to the MPL surface to ensure ruggedness. The MPL-CNT/AuND structure was used to measure As3+ samples in a concentration range from 0.5 to 80 ppb using anodic stripping voltammetry (ASV). The variation in peak intensities was linear (R2: 0.997), and the limit of detection (LOD) was 0.4 ppb. The average relative standard deviation (RSD) of the peak intensities from the voltammograms of each sample collected using three separately prepared MPL-CNT/AuNDs was 8.7%, thereby demonstrating good sensor-to-sensor reproducibility. Furthermore, when three As3+ samples prepared in tap water were measured, the accuracy was maintained without noticeable degradation and the response was steady up to 50-cycle measurements.

Graphical abstract: A mechanical pencil lead-supported carbon nanotube/Au nanodendrite structure as an electrochemical sensor for As(iii) detection

Supplementary files

Article information

Article type
Paper
Submitted
06 اپریل 2016
Accepted
22 جوٗن 2016
First published
22 جوٗن 2016

Analyst, 2016,141, 5879-5885

A mechanical pencil lead-supported carbon nanotube/Au nanodendrite structure as an electrochemical sensor for As(III) detection

P. K. Duy, J. Sohn and H. Chung, Analyst, 2016, 141, 5879 DOI: 10.1039/C6AN00803H

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements