Issue 7, 2024

Crosstalk-free graphene–liquid elastomer based printed sensors for unobtrusive respiratory monitoring

Abstract

Flexible strain sensors have garnered attraction in the human healthcare domain. However, caveats like crosstalk and noise associated with the output signal of such a sensor often limit the accuracy. Hence, developing a strain sensor via frugal engineering is critical, thereby warranting its mass utility. A stencil printable graphene/liquid elastomeric crosstalk-free strain sensor for unobtrusive respiratory monitoring is reported herein. Printing supports the frugality of the process and avoids complex fabrication. The sensor was mounted on a wearable mask, and the sensor console was fabricated. The console demonstrated the capability to detect the respiratory profile at room and low temperature (−26 °C) with an SNR of −12.85 dB. Developed sensors could nullify the impact of temperature and humidity and generate respiratory signals due to strain induced by breathing. A model experiment was conducted to support the fidelity of the strain mechanism. The console demonstrated excellent stability (over 500 cycles) with a sensitivity of −196.56 (0–0.17% strain) and 117.49 (0.17–0.34% strain). The console could accurately determine conditions like eupnea, tachypnoea, etc., and transmit the data wirelessly via Bluetooth. These findings solve major caveats in flexible sensor development by focusing on selectivity, sensitivity, and stability.

Graphical abstract: Crosstalk-free graphene–liquid elastomer based printed sensors for unobtrusive respiratory monitoring

Supplementary files

Article information

Article type
Paper
Submitted
21 ستمبر 2023
Accepted
09 جنؤری 2024
First published
09 جنؤری 2024

Nanoscale, 2024,16, 3498-3509

Crosstalk-free graphene–liquid elastomer based printed sensors for unobtrusive respiratory monitoring

S. Sharma, A. Thapa, S. Singh and T. Mondal, Nanoscale, 2024, 16, 3498 DOI: 10.1039/D3NR04774A

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements