Issue 17, 2023

Highly sensitive and selective SERS substrates with 3D hot spot buildings for rapid mercury ion detection

Abstract

Heavy metal ions, which are over-emitted from industrial production, pose a major threat to the ecological environment and human beings. Among the present detection technologies, achieving rapid and on-site detection of contaminants remains a challenge. Herein, capillaries with three-dimensional (3D) hot spot constructures are fabricated to achieve repaid and ultrasensitive mercury ion (Hg2+) detection in water based on surface-enhanced Raman scattering (SERS). The 4-mercapto pyridine (4-Mpy) serves as the Raman reporter with high selectivity, enabling the detection of Hg2+ by changes in adsorption configuration at the trace level. Under optimized conditions, the SERS response of 4-Mpy for Hg2+ exhibits good linearity, ranging from 1 pM to 0.1 μM in a few minutes, and the detection limit of 0.2 pM is much lower than the maximum Hg2+ concentration of 10 nM allowed in drinking water, as defined by the US Environmental Protection Agency (EPA). Simultaneously, combined with the theoretical simulation and experimental results, the above results indicate that the SERS substrates possess outstanding performances in specificity, recovery rate and stability, which may hold great potential for achieving rapid and on-site environmental pollutant detection using a portable Raman spectrometer.

Graphical abstract: Highly sensitive and selective SERS substrates with 3D hot spot buildings for rapid mercury ion detection

Supplementary files

Article information

Article type
Paper
Submitted
24 میٔ 2023
Accepted
18 جوٗلایی 2023
First published
18 جوٗلایی 2023

Analyst, 2023,148, 4044-4052

Highly sensitive and selective SERS substrates with 3D hot spot buildings for rapid mercury ion detection

J. Li, W. Peng, A. Wang, M. Wan, Y. Zhou, X. Zhang, S. Jin and F. Zhang, Analyst, 2023, 148, 4044 DOI: 10.1039/D3AN00827D

To request permission to reproduce material from this article, please go to the Copyright Clearance Center request page.

If you are an author contributing to an RSC publication, you do not need to request permission provided correct acknowledgement is given.

If you are the author of this article, you do not need to request permission to reproduce figures and diagrams provided correct acknowledgement is given. If you want to reproduce the whole article in a third-party publication (excluding your thesis/dissertation for which permission is not required) please go to the Copyright Clearance Center request page.

Read more about how to correctly acknowledge RSC content.

Social activity

Spotlight

Advertisements